We assessed factory-calibrated field-portable X-ray fluorescence (pXRF) data quality for use with minimally-prepared aquatic sediments, including the precision of replicate pXRF measurements, accuracy of factory-calibrated pXRF values as compared to total digestion/ICP-OES concentrations, and comparability of calibrated pXRF values to extractable concentrations. Data quality levels for precision, accuracy, and comparability were not equivalent for element/analyzer combinations. All analyses of elements that were assessed for precision and accuracy on a single analyzer were both precise (<10% relative standard deviation) and accurate (r2 > 0.85) for K, Ca, Ti, Mn, Fe, and Zn. Calibrated pXRF values for Al, K, Ca, Ti, Mn, Fe, Cu, Zn, and Pb were within ∼10% relative difference of total digestion/ICP-OES concentrations. Calibrated pXRF values for Fe, Cu, Zn, As, and Pb were within ∼20% relative difference of extractable concentrations. Some elements had a higher level of data quality using specific analyzers, but in general, no pXRF analyzer had the highest level of data quality in all categories. Collectively, our data indicate that a wide range of factory-calibrated pXRF units are capable of providing high-quality total concentrations for the analysis of aquatic sediments.

Freshwater contamination with mining waste can result with high concentrations of toxic metals in the water and in fish organs. In North-Eastern Macedonia, several rivers (e.g., Zletovska, Kriva) are exposed to acid mine drainage from active Pb/Zn mines. Previous studies confirmed high concentrations of dissolved metals in their water. This study was performed in liver and gills of Vardar chub (Squalius vardarensis Karaman, 1928) from three Macedonian rivers (Bregalnica, Kriva and Zletovska) in spring and autumn 2012. The aim was to establish if increased exposure to certain metals have resulted with their increased bioaccumulation. The concentrations of 19 elements were measured in cytosolic tissue fractions, to obtain information on metabolically available metal species. The following ranges of cytosolic concentrations of highly toxic elements were measured in the Vardar chub liver (in μg/L): Cd, 1.18–184; Cs, 0.25–25.4; Tl, 0.02–5.80; Pb, 0.70–61.1. Their ranges measured in the gills (in μg/L) were the following: Cd, 0.24–59.2; Cs, 0.39–24.4; Tl, 0.01–1.00; Pb, 0.65–87.2. Although the water of the mining impacted Zletovska River was highly contaminated with several essential metals, especially with Mn and Zn, the majority of essential elements (Na, K, Ca, Mg, Co, Cu, Fe, Mn, Mo, and Zn) did not reflect the exposure level. In contrast, seven nonessential elements reflected the level of exposure in the water. Significantly increased hepatic and gill concentrations of Cs, Rb, Sr, and Tl were detected in Vardar chub from the Zletovska River compared to the other two rivers, of Cd and Pb in the Zletovska and Kriva River compared to Bregalnica, and of V in the Bregalnica River compared to Zletovska and Kriva rivers. Observed significant metal bioaccumulation, in particular of highly toxic elements, as a consequence of exposure to water contaminated with mining waste points to necessity of intensified supervision of mining impacted rivers.

Solid wastes containing potentially toxic elements (PTEs) are widely generated around the globe. Critical concerns have been raised over their impacts on human health and the environment, especially for the exposure to PTEs during the transfer and disposal of the wastes. It is important to devise highly-efficient and cost-effective treatment technologies for the removal or immobilisation of PTEs in solid wastes. However, there is an inadequate overview of the global flow of PTEs-contaminated solid wastes in terms of geographical distribution patterns, which is vital information for decision making in sustainable waste management. Moreover, in view of the scarcity of resources and the call for a circular economy, there is a pressing need to recover materials (e.g., precious metals and rare earth elements) from waste streams and this is a more sustainable and environmentally friendly practice compared with ore mining. Therefore, this article aims to give a thorough overview to the global flow of PTEs and the recovery of waste materials. This review first summarises PTEs content in various types of solid wastes; then, toxic metal(loid)s, radioactive elements, and rare earth elements are critically reviewed, with respect to their patterns of transport transformation and risks in the changing environment. Different treatments for the management of these contaminated solid wastes are discussed. Based on an improved understanding of the dynamics of metal(loid) fates and a review of existing management options, new scientific insights are provided for future research in the development of high-performance and sustainable treatment technologies for PTEs in solid wastes.

There have been an increasing number of automobile vehicles in cities, so that newly developed residential areas are mostly designed with underground parking garages (UPGs). For naturally ventilated UPGs, the ventilation performance may be insufficient to discharge totally vehicle-induced pollutants out of the enclosed underground spaces, which consequently results in threats to residents' health. This study, therefore, aims at examining the patterns of pollutant concentrations in naturally ventilation UPGs as well as their sensitivities to traffic volume. In particular, the naturally ventilated UPGs’ weekday particulate matters (PM₂.₅ and PM₁₀), CO₂ and TVOC concentration as well as their relationships between traffic volume were quantitively evaluated based on field measurements in eight residential areas in Baoding, China. Results indicated that daily average PM₂.₅, PM₁₀, CO₂ and TVOC concentrations in studied UPGs were 105.81 μg/m³, 464.17 μg/m³, 571 ppm and 24 ppb, respectively. The PM₂.₅ concentrations in UPGs were slightly higher than that in ambient environments, while the PM₁₀ concentrations in UPGs were significantly higher. Furthermore, both PM₁₀ and TVOC concentrations in UPGs were in significant relationships with traffic volume at the p < 0.01 level, while the concentration of UPG PM₂.₅ generally exhibited a significant correlation (p < 0.01) with that of the ambient. Nevertheless, a combination of traffic volume, the ambient and accumulative effect was much better to explain the hourly PM₁₀ concentration in UPGs. These findings will be conducive to instruct engineers with fundamental knowledge of UPG ventilation design.

Leachates from municipal landfills are formed as infiltration waters flowing through the landfill. They contain toxic, dissolved products of biochemical reactions taking place in the deposit. They cause soil and groundwater pollution. It is necessary to take them out of the landfill cover and utilize toxins contained therein, in particular heavy metals. Such processes are conducted with the use of microorganisms. Due to the content of toxic compounds, introducing leachates into the process of biological purification poses a threat to the microorganisms used in these processes.An alternative to microbial co-treatment of sludge and leachate as well as soil contaminated with communal leachate is to use red hybrid of California (Eisenia fetida Sav.), an earthworm resistant to environmental toxins, in particular heavy metals.The aim of the conducted research is to demonstrate the possibility of using red hybrid of California in leachate bioutilization as a complementary or alternative method to the process of leachate utilization with the use of microorganisms.The obtained results led to the conclusion that Eisenia fetida accumulates environmental toxins well. By collecting and processing them in the tissues, it remedies the substrate and retains long life and fertility, and the ability to reproduce. The research demonstrated high dynamics of population growth (from 25 individuals in the initial deposit to 298 individuals after six months of research). These properties are related to the presence of enzyme proteins from the metallothionein group in the gastrointestinal tract cells. Packing heavy metals found in leachates into the metallothionein coat limits their toxic effect on earthworm tissues, which confirms the possibility of using earthworms in the processes of detoxification of municipal leachate.

Bacterial communities inhabiting sediments in coastal areas endure the effect of strong anthropogenic pressure characterized by the presence of multiple contaminants. Understanding the effect of pollutants on the organization of bacterial communities is of paramount importance in order to unravel bacterial assemblages colonizing specific ecological niches. Here, chemical and molecular approaches were combined to investigate the bacterial communities inhabiting the sediments of the Ichkeul Lake/Bizerte Lagoon, a hydrological system under anthropogenic pressure. Although the microbial community of the Ichkeul Lake sediment was different to that of the Bizerte Lagoon, common bacterial genera were identified suggesting a lake-lagoon continuum probably due to the hydrology of the system exchanging waters according to the season. These genera represent bacterial "generalists" maintaining probably general biogeochemical functions. Linear discriminant analysis effect size (LEfSe) showed significant differential abundance distribution of bacterial genera according to the habitat, the pollution type and level. Further, correlation analyses identified specific bacterial genera which abundance was linked with pesticides concentrations in the lake, while in the lagoon the abundance of specific bacterial genera was found linked with the concentrations of PAHs (Polycyclic aromatic hydrocarbons) and organic forms of Sn. As well, bacterial genera which abundance was not correlated with the concentrations of pollutants were identified in both lake and lagoon. These findings represent valuable information, pointing out specific bacterial genera associated with pollutants, which represent assets for developing bacterial tools for the implementation, the management, and monitoring of bioremediation processes to mitigate the effect of pollutants in aquatic ecosystems.

Previous studies have shown the effect of surface coatings on biofouling; however, they did not take into account the interaction of the micro and macrofouling communities, the effect of substrate orientation and the zooplankton-zoobenthic coupling together. Therefore, the aim of this study was to evaluate the effect of Zn- and Cu₂O-based coatings on micro and macrofouling on steel surfaces, while also observing the role of substrate orientation and zooplankton supply. An experiment was carried out in the Patos Lagoon Estuary in southern Brazil for three months between spring and summer, where ASTM-36 steel plates represented different coatings (Zn- and/or Cu₂O-based) and orientations (vertical and horizontal). To assess the zooplankton supply, sampling was carried out weekly using a 200 μm plankton net. Zn-based coating positively affected microfouling density compared to uncoated surfaces. The same pattern was observed with macrofouling, associated with vagile fauna preference, which represented 70% of the settled macrofoulers. Cu₂O-based antifouling painted surfaces showed the highest microfouling density inhibition, while Zn + Cu₂O-based coating did not affect the bacteria adhesion but showed lower density compared to Zn-based coating alone. The coatings combination showed the highest invertebrate inhibition. In this way, the macrofouling community was more sensitive than microfouling was to the antifouling coatings tested. The substrate orientation only affected macrofouling, horizontal surfaces being more attractive than vertical. Meroplankton, tychoplankton and holoplankton were recorded on the surfaces, although their representation in plankton was not proportional to the recruits recorded on the substrates. This was probably due to fast dispersion, the interactions of other factors and/or ecological succession stage. Surface coating, substrate orientation, and zooplankton supply interacted with the biofouling process on steel in different ways depending on the organism evaluated. Therefore, copper oxide- and zinc-based coatings were not suitable as coatings to avoid the total biofouling establishment.

As a new type of pollutant, fluoroquinolones (FQs) antibiotics are ubiquitous in environment and have some threat to human health and ecological environment. Their ecological toxicity to the environment urgently need to be assessed. Therefore, we firstly explored the toxic effects and possible mechanism of cardiovascular toxicity induced by gatifloxacin (GTFX) and ciprofloxacin (CPFX) using zebrafish model. After 24 h exposure, the zebrafish treated with GTFX showed pericardial edema which was further investigated by histopathological examination, while CPFX exposure did not induce morphological abnormalities. However, both of them induced cardiac dysfunction, such as decreased heart rate and cardiac output which was showed a positive correlation with the concentration. To better understand the possible molecular mechanisms underlying cardiovascular toxicity in zebrafish, we investigated the transcriptional level of genes related to calcium signaling pathway and cardiac muscle contraction. The results indicated that the expression of ATPase (atp2a1l) and cardiac troponin C (tnnc1a) genes were significantly inhibited, the expression of calcium channel (cacna1ab) gene showed slight promoted trend after CPFX exposure. For zebrafish treated with GTFX, the expression of atp2a1l genes was also significantly inhibited, while the expression of tnnc1a genes was slightly inhibited and cacna1ab genes expression had no obvious effect. The present study firstly revealed that GTFX exposure can induce morphological and functional abnormalities on the cardiovascular system of zebrafish. Though CPFX exposure did not induce morphological abnormalities, the function of cardiovascular system was still damaged. Mechanistically, this toxicity might result from the pressure of down-regulation of genes associated with calcium signaling pathway and cardiac muscle contraction. The results of this study can provide a valuable theoretical basis for the establishment of FQs environmental quality standards in water environment, environmental drug regulation and risk management.

An accurate estimation of population exposure to particulate matter with an aerodynamic diameter <2.5 μm (PM₂.₅) is crucial to hazard assessment and epidemiology. This study integrated annual data from 1146 in-home air monitors, air quality monitoring network, public applications, and traffic smart cards to determine the pattern of PM₂.₅ concentrations and activities in different microenvironments (including outdoors, indoors, subways, buses, and cars). By combining massive amounts of signaling data from cell phones, this study applied a spatio-temporally weighted model to improve the estimation of PM₂.₅ exposure. Using Shanghai as a case study, the annual average indoor PM₂.₅ concentration was estimated to be 29.3 ± 27.1 μg/m³ (n = 365), with an average infiltration factor of 0.63. The spatio-temporally weighted PM₂.₅ exposure was estimated to be 32.1 ± 13.9 μg/m³ (n = 365), with indoor PM₂.₅ contributing the most (85.1%), followed by outdoor (7.6%), bus (3.7%), subway (3.1%), and car (0.5%). However, considering that outdoor PM₂.₅ makes a significant contribution to indoor PM₂.₅, outdoor PM₂.₅ was responsible for most of the exposure in Shanghai. A heatmap of PM₂.₅ exposure indicated that the inner-city exposure index was significantly higher than that of the outskirts city, which demonstrated that the importance of spatial differences in population exposure estimation.

Biomass is a dominant solid fuel type worldwide. Traditional biomass combustion leads to severe indoor and ambient environmental problems. Biomass pellet utilization in forced-draft gasifier stoves is regarded as an improved approach to these problems. Previous studies on forced-draft biomass stoves mainly considered average emission amounts and lacked details of the combustion properties and dynamic correlations between emissions and combustion. This study used a dynamic measurement system to test a typical forced-draft gasifier stove consuming wood pellets and maize straw pellets. Real-time fuel burning rate, that partly reflects the combustion performance, and CO, NOₓ and PM₂.₅ emission rates, over a whole combustion course, were monitored. In all tests, the burning rate rose to a high and stable level, and then sharply subsided. CO, NOₓ and PM₂.₅ emission rates varied across the combustion course. CO (NOₓ) emissions have a negative (positive) logarithmic linear relationship with burning rate, while no consistent relationship was observed for PM₂.₅ emission rate. The identified relationships between burning rate and pollutant emission rates suggest the possibility of estimating emission performance of forced-draft biomass pellet stoves based on combustion indicators, or vice versa.