Lead (Pb(II)) pollution in water poses a serious threat to human health in many parts of the world. In the past decades, research has been aimed at developing efficient and cost-effective methods to address the problem. In this study, dimethyl sulfoxide (DMSO) and potassium acetate (K-Ac) intercalated kaolinite complexes were synthesized and subsequently utilized for Pb(II) removal from water. The intercalation of kaolinite with DMSO was found to be useful for expanding the interlayer space of the clay mineral from 0.72 to 1.12 nm. Kaolinite intercalation with K-Ac (KDK) increased the interlayer space from 1.12 to 1.43 nm. The surface area of KDK was found to be more than threefold higher as compared to natural kaolinite (NK). Batch experimental results revealed that the maximum Pb(II) uptake capacity of KDK was 46.45 mg g⁻¹ which was higher than the capacity of NK (15.52 mg g⁻¹). Reusability studies showed that KDK could be reused for 5 cycles without substantially losing its adsorption capacity. Furthermore, fixed-bed column tests confirmed the suitability of KDK in continuous mode for Pb(II) removal. Successful application of intercalated kaolinite for Pb(II) adsorption in batch and column modes suggests its application in water treatment (especially removal of divalent metals).

In civil engineering, many geotechnical and forensic projects employ polyurethane (PU) for ground improvement, and the results have shown to be effective in terms of time and cost savings. However, similar to many other chemical stabilisers, the use of PU for soil stabilisation may have environmental repercussions. Therefore, this paper utilised a toxicity characteristic leaching procedure (TCLP) to investigate the potential for ground contamination resulting from the application of PU for the stabilisation of marine clay. Furthermore, the hazardousness of PU during the stabilisation of marine clay was investigated by testing its reactivity, ignitability, corrosivity and physical properties. The results reveal that the quantity of heavy metals present in PU is far below the regulatory limits. The results further confirm that PU is odourless and non-corrosive and that it is non-cyanide and non-sulphide-bearing. However, PU is capable of igniting. Overall, the potential application of PU for ground improvement is promising due to its environmental friendliness.

The present study investigated the effects of polyvinyl chloride (PVC) microparticles (MP) on hepatic antioxidant enzymes activities, serum biochemical and liver histology of juvenile Clarias gariepinus. A total of 180 (25.15 g average weight) C. gariepinus were fed PVC MP (95.41 ± 4.23 μm) spiked diets at 0.5, 1.5, 3.0 percentage inclusion levels and a control diet for 45 days of exposure, then followed by 30 days of depuration trials. Fish specimens (9) from each treatment were sampled every 15-day interval for serum biochemical, liver antioxidant enzymes and histopathological assay. Glucose and triglyceride levels increased significantly in PVC-treated groups when compared with the control. Protein levels of 0.5% and 3.0% PVC-treated groups reduced significantly on the 15th and 30th day exposure periods, while serum enzyme activities of all PVC-treated groups increased significantly in a time-dependent manner. Antioxidant enzymes (superoxide dismutase, glutathione peroxidase, catalase) activity in the liver of the treated groups also decreased progressively in a time-dependent manner. A time-dependent elevation in lipid peroxidation levels was observed in PVC MP-treated groups. Histopathological assessment of the fish liver showed mild to severe levels of glycogen depletion, fatty vacuolation and degeneration, hepatocellular necrosis in PVC-treated groups with reference to the control. The present study revealed that PVC microplastic induced oxidative damage and hepatic histopathological alterations in the exposed fish.

Ecotoxicological bioassays have been widely applied to evaluate the toxicity of substances in standardized test organisms. Nevertheless, the main challenge for researchers is the use of native species to express the effects of pollutants on aquatic biota. Thirty years ago, Smith and collaborators evaluate the possible use of Pristina longiseta (as Pristina leidyi) in acute toxicity test, developing some experiments using cadmium and vanadium as toxicants. The present work aimed to update the use of P. longiseta, in acute bioassays, presenting the occurrence and general characteristics of the species; adaptation of cultivation to tropical conditions; sensitivity tests using potassium chloride (KCl) and copper sulfate (CuSO₄) as reference substances standardized by OECD, USEPA, and ABNT; and acute exposure to zinc chloride (ZnCl₂). The results showed a successful use of this species as tropical test organism, which presented easy laboratory rearing and responded to the classical ecotoxicological index. The present study can increase the utilization of P. longiseta in bioassays for tropical regions and improve the evaluation of environmental impacts using a native species in ecotoxicological studies.

Black carbon (BC) is a major light-absorbing component in the atmosphere and plays an important role in aerosol radiative forcing. In this study, the combination of monitoring data and the WRF-Chem model was used to study the source apportionment of BC in China during January 2017. Meanwhile, the aerosol-radiation interaction (ARI) effect of BC was also simulated. We found that the average BC/PM₂.₅ ratios were 4.8%, 4.2%, and 3.8% in Shijiazhuang, Tangshan, and Beijing, respectively. The source apportionment suggested that traffic emissions played a dominant role in the BC concentration over Beijing. The traffic, residential, industrial, and power contributions accounted for 41%, 32%, 25%, and 2% of total concentration, respectively. The BC concentration in Beijing was also affected by regional transport. During January, the contributions of monthly regional transport to BC and PM₂.₅ concentrations in Beijing were 41% and 49%, respectively. BC emissions decreased downward shortwave radiation (SWDOWN) at the surface, leading to a decrease in temperature. As a result, the planetary boundary layer height (PBLH) development was suppressed and the relative humidity increased. The stable meteorological conditions suppressed the dispersion of air pollutants and increased BC concentrations. Traffic emissions decreased the monthly SWDOWN by approximately 2.2 W/m², decreased 2 m temperature (T2) by approximately 0.1 °C, increased 2 m relative humidity (RH2) by approximately 0.5%, and decreased PBLH by approximately 4.4 m.

This research developed a more efficient integrated model (IM) based on combining the Nash-Sutcliffe efficiency coefficient (NSEC) and individual data mining (DM) algorithms for the spatial mapping of dust provenance in the Hamoun-e-Hirmand Basin, southeastern Iran. This region experiences severe wind erosion and includes the Sistan plain which is one of the most PM₂.₅-polluted regions in the world. Due to a prolonged drought over the last two decades, the frequency of dust storms in the study area is increasing remarkably. Herein, 14 factors controlling dust emissions (FCDEs) including soil characteristics, climatic variables, digital elevation map, normalized difference vegetation index, land use and geology were mapped. Correlation and collinearity among the FCDEs were examined by the Pearson test, tolerance coefficient (TC) and variance inflation factor (VIF), with the results suggesting a lack of collinearity between FCDEs. A tree-based genetic algorithm was applied to prioritize and quantify the importance weights of the FCDEs. Thirteen individual data mining models were applied for mapping dust provenance. The model performance was assessed using root mean square error, mean absolute error and NSEC. Based on clustering analysis, the 13 DM models were grouped into five clusters and then the cluster with the highest NSEC values used in an integrated modelling process. Based on the results, the IM (NSEC = 93%) outperformed the individual DM models (the NSEC values range between 51 and 92%). Using the IM, 11, 5, 7 and 77% of the total study area were classified into low, moderate, high and very high susceptibility classes for dust provenance, respectively. Overall, the results illustrate the benefits of an IM for mapping spatial variation in the susceptibility of catchment areas to act as dust sources.

The soil microbiome comprises one of the most important and complex components of all terrestrial ecosystems as it harbors millions of microbes including bacteria, fungi, archaea, viruses, and protozoa. Together, these microbes and environmental factors contribute to shaping the soil microbiome, both spatially and temporally. Recent advances in genomic and metagenomic analyses have enabled a more comprehensive elucidation of the soil microbiome. However, most studies have described major modulators such as fungi and bacteria while overlooking other soil microbes. This review encompasses all known microbes that may exist in a particular soil microbiome by describing their occurrence, abundance, diversity, distribution, communication, and functions. Finally, we examined the role of several abiotic factors involved in the shaping of the soil microbiome.

Human exposure to silica nanoparticles (SNPs) and formaldehyde (FA) is increasing and this has raised some concerns over their possible toxic effects on the exposed working populations. Notwithstanding several studies in this area, the combined toxicological effects of these contaminants have not been yet studied. Therefore, this in vitro study was designed to evaluate the SNPs and FA combined toxicity on human lung epithelial cells (A549 cells). The cells were exposed to SNPs and FA separately and in combined form and the single and combined toxicity of SNPs and FA were evaluated by focusing on cellular viability, DNA damage, and apoptosis via MTT, DAPI staining, DNA ladder, and Annexin V-FITC apoptosis assays. The results showed a significant increase in cytotoxicity, DNA damage, and chromatin fragmentation and late apoptotic\necrotic rates in combined treated cells compared with SNPs and FA-treated cells (P value < 0.05). Two-factorial analysis showed an additive toxic interaction between SNPs and FA. Eventually, this can be deduced that workers exposed simultaneously to SNPs and FA may be at high risk compared with exposure to each other.

Toxic pollutants are affecting the environment on a global scale. To quantify the extent of the elemental pollution in Peixian, a typical Chinese city, we collected 332 soil samples from agricultural, residential, woodland, and hydrological environments. Using multivariate statistical and geostatistical analyses, the results indicate that contaminants including chromium (Cr), zinc (Zn), copper (Cu), lead (Pb), cadmium (Cd), and arsenic (As) may share common sources such as commercial activities, coal mining activities, water transportation, power generation, and livestock manure. The presence of mercury (Hg) in the southern part of the study area, however, is almost entirely attributed to nearby mining activities. The value of contamination index was the highest in hydrological environments. Health exposure risk assessments of the elements were also investigated. With the exception of Pb, the potentially toxic elements in the study area do not pose a severe non-carcinogenic health risk. At the levels observed in our study, however, Pb may pose a non-carcinogenic risk to children. Based on these results, the area’s livability is assessed. The urban livability analysis shows that the livability level is higher in the western part of the study area than it is in the eastern part.

Industries continuously emit xenobiotics into the environment, which increases risks of exposing humans and other biota to xenobiotics. Though various conventional and modern environmental remediation technologies are being employed, some of them are ineffective in removing xenobiotics, while others are costly and not feasible for large-scale utilization. Maize stover (MS) and rice husks (RH) are produced in abundance globally, which make them ideal and cost-effective feedstocks for large-scale biochar production for environmental remediation. Since either type of pristine MS and RH biochar may not be effective in removing some xenobiotics, the incorporation of modifiers into MS/RH biochars can help to form composite MS/RH biochar which in turn can better decontaminate water and soil. Thus, this review paper provides a comprehensive overview of the preparation, characterization, and environmental remediation using pristine and composite MS/RH biochar. Possible areas for composite MS/RH biochar applications and future perspectives of the technology in reducing xenobiotics are also proposed in this paper.