The ubiquitous presence and persistency of microplastics (MPs) in aquatic environments are of particular concern since they represent an increasing threat to marine organisms and ecosystems. Great differences of concentrations and/or quantities in field samples have been observed depending on geographical location around the world. The main types reported have been polyethylene, polypropylene, and polystyrene. The presence of MPs in marine wildlife has been shown in many studies focusing on ingestion and accumulation in different tissues, whereas studies of the biological effects of MPs in the field are scarce. If the nature and abundance/concentrations of MPs have not been systematically determined in field samples, this is due to the fact that the identification of MPs from environmental samples requires mastery and execution of several steps and techniques. For this reason and due to differences in sampling techniques and sample preparation, it remains difficult to compare the published studies.Most laboratory experiments have been performed with MP concentrations of a higher order of magnitude than those found in the field. Consequently, the ingestion and associated effects observed in exposed organisms have corresponded to great contaminant stress, which does not mimic the natural environment. Medium contaminations are produced with only one type of polymer of a precise sizes and homogenous shape whereas the MPs present in the field are known to be a mix of many types, sizes and shapes of plastic. Moreover, MPs originating in marine environments can be colonized by organisms and constitute the sorption support for many organic compounds present in environment that are not easily reproducible in laboratory. Determination of the mechanical and chemical effects of MPs on organisms is still a challenging area of research. Among the potential chemical effects it is necessary to differentiate those related to polymer properties from those due to the sorption/desorption of organic compounds.

The chemical composition of single particles deposited on industrial filters located in three different chimneys of an iron-manganese (Fe–Mn) alloy manufacturing plant have been compared using aerosol time-of-flight mass spectrometry (ATOFMS) and scanning electron microscopy–energy dispersive X-ray spectrometry (SEM-EDX). Very similar types of particles were observed using both analytical techniques. Calcium-containing particles dominated in the firing area of the sintering unit, Mn and/or Al-bearing particles were observed at the cooling area of the sintering unit, while Mn-containing particles were dominant at the smelting unit. SEM-EDX analysis of particles collected downstream of the industrial filters showed that the composition of the particles emitted from the chimneys is very similar to those collected on the filters. ATOFMS analysis of ore samples was also performed to identify particulate emissions that could be generated by wind erosion and manual activities. Specific particle types have been identified for each emission source (chimneys and ore piles) and can be used as tracers for source apportionment of ambient PM measured in the vicinity of the industrial site.

Spatial-temporal distributions, sources identification and risk assessment of polycyclic aromatic hydrocarbons (PAHs) in overlying water and surface sediments in urban river networks of Shanghai were studied. Analytical results showed that there was a significant seasonal variation in concentrations of ∑16PAHs in water, suspended particulate matter (SPM) and sediment phases in this study area. The PAHs pollution in these multi-phases were in the medium level compared with other areas around the world, and the levels of PAHs contamination in SPM and sediment phases in hierarchical rivers showed TS (the third-order stream) > FS (the first-order stream) > SS (the second-order stream). Two manners of isomer ratios and principal component analysis (PCA) were used to identify PAHs origins, and suggested that combustion processes are dominant for PAHs sources. The ratios of PAHs origins by fossil fuels combustion, coke burning and crude oil in hierarchical rivers were determined with FS > SS > TS in SPM and sediment phases, and the ratio of PAHs origins by traffic emissions was analyzed with TS > SS > FS. PAHs in water samples have a certain impact on aqueous ecological system especially due to the fact that the ∑ceq values of nine PAHs were calculated from 0.715 to 15.831 μg/L in winter, which inferred serious ecological risk to some special aquatic organisms. The calculations of MERMQ in sediment samples showed that the MERMQ values ranged from 0.021 to 1.209 in winter and 0.019 to 0.643 in summer, which suggested high toxicity at six sampling sites in winter and only one location in summer due to high levels of PAHs. Furthermore, the toxicity degree of sediments were demonstrated with TS > FS > SS.

Coastal urban infrastructures are proliferating across the world, but knowledge about their emergent impacts is still limited. Here, we provide evidence that urban artificial reefs have a high potential to accumulate the diverse forms of litter originating from anthropogenic activities around cities. We test the hypothesis that the structural complexity of urban breakwaters, when compared with adjacent natural rocky intertidal habitats, is a driver of anthropogenic litter accumulation. We determined litter abundances at seven sites (cities) and estimated the structural complexity in both urban breakwaters and adjacent natural habitats from northern to central Chile, spanning a latitudinal gradient of ∼15° (18°S to 33°S). Anthropogenic litter density was significantly higher in coastal breakwaters when compared to natural habitats (∼15.1 items m−2 on artificial reefs versus 7.4 items m−2 in natural habitats) at all study sites, a pattern that was temporally persistent. Different litter categories were more abundant on the artificial reefs than in natural habitats, with local human population density and breakwater extension contributing to increase the probabilities of litter occurrence by ∼10%. In addition, structural complexity was about two-fold higher on artificial reefs, with anthropogenic litter density being highest at intermediate levels of structural complexity. Therefore, the spatial structure characteristic of artificial reefs seems to enhance anthropogenic litter accumulation, also leading to higher residence time and degradation potential. Our study highlights the interaction between coastal urban habitat modification by establishment of artificial reefs, and pollution. This emergent phenomenon is an important issue to be considered in future management plans and the engineering of coastal ecosystems.

As of November 2014, the Korean Ministry of Environment (KME) has been forecasting the concentration of particulate matter with diameters ≤ 10 μm (PM10) classified into four grades: low (PM10 ≤ 30 μg m−3), moderate (30 < PM10 ≤ 80 μg m−3), high (80 < PM10 ≤ 150 μg m−3), and very high (PM10 > 150 μg m−3). The KME operational center generates PM10 forecasts using statistical and chemistry-transport models, but the overall performance and the hit rate for the four PM10 grades has not previously been evaluated. To provide a statistical reference for the current air quality forecasting system, we have developed a neural network model based on the synoptic patterns of several meteorological fields such as geopotential height, air temperature, relative humidity, and wind. Hindcast of the four PM10 grades in Seoul, Korea was performed for the cold seasons (October–March) of 2001–2014 when the high and very high PM10 grades are frequently observed. Because synoptic patterns of the meteorological fields are distinctive for each PM10 grade, these fields were adopted and quantified as predictors in the form of cosine similarities to train the neural network model. Using these predictors in conjunction with the PM10 concentration in Seoul from the day before prediction as an additional predictor, an overall hit rate of 69% was achieved; the hit rates for the low, moderate, high, and very high PM10 grades were 33%, 83%, 45%, and 33%, respectively. Our findings also suggest that the synoptic patterns of meteorological variables are reliable predictors for the identification of the favorable conditions for each PM10 grade, as well as for the transboundary transport of PM10 from China. This evaluation of PM10 predictability can be reliably used as a statistical reference and further, complement to the current air quality forecasting system.

Microcystin-LR (MC-LR), an important variant of cyanotoxin family, was frequently encountered in the contaminated aquatic environment and taken as a potent hepatotoxin. However, a little was known on the association between the long-term MC-LR exposure and lung damage. In this study, we investigated the changes of the pulmonary histopathology, mitochondrial DNA (mtDNA) integrity and the expression of mtDNA encoded genes in the mice with chronic exposed to MC-LR at different concentrations (1, 5, 10, 20 and 40 μg/L) for 12 months. Our results showed that the long-term and persistent exposure to MC-LR disturbed the balance of redox system, influenced mtDNA stability, changed the expression of mitochondrial genes in the lung cells. Notably, MC-LR exposure influenced the level of inflammatory cytokines and resulted in thickening of the alveolar septa. In conclusion, chronic exposure to MC-LR affected mtDNA maintenance, and caused lung impairment in mice.

The occurrence and spatial distribution of polychlorinated naphthalenes (PCNs) were investigated in sediments, upland and paddy soils from the Liaohe River Basin. Concentrations of ΣPCNs were in the range of 0.33–12.49 ng g⁻¹ dry weight (dw) in sediments and 0.61–6.60 ng g⁻¹ dw in soils, respectively. Tri-CNs and tetra-CNs were the dominating homologues. An increasing trend of PCNs contamination was found in sediments with the rivers flowing through industrial areas and cities. Soils collected near cities exhibited higher abundance of PCNs than that of rural areas. The distribution of PCNs was related to the local industrial activities, rather than total organic carbon. Positive matrix factorization (PMF) was used for the source apportionment of PCNs in sediments and paddy soils. The result of PMF indicated that PCNs in sediments and paddy soils were mainly from the industrial processes, with additional contributions from the historical use of Halowax 1014 and atmospheric deposition.

Increasing anthropogenic activities in the Arctic represent an enhanced threat for oil pollution in a marine environment that is already at risk from climate warming. In particular, this applies to species with free-living pelagic larvae that aggregate in surface waters and under the sea ice where hydrocarbons are likely to remain for extended periods of time due to low temperatures. We exposed the positively buoyant eggs of polar cod (Boreogadus saida), an arctic keystone species, to realistic concentrations of a crude oil water-soluble fraction (WSF), mimicking exposure of eggs aggregating under the ice to oil WSF leaking from brine channels following encapsulation in ice. Total hydrocarbon and polycyclic aromatic hydrocarbon levels were in the ng/L range, with most exposure concentrations below the limits of detection throughout the experiment for all treatments. The proportion of viable, free-swimming larvae decreased significantly with dose and showed increases in the incidence and severity of spine curvature, yolk sac alterations and a reduction in spine length. These effects are expected to compromise the motility, feeding capacity, and predator avoidance during critical early life stages for this important species. Our results imply that the viability and fitness of polar cod early life stages is significantly reduced when exposed to extremely low and environmentally realistic levels of aqueous hydrocarbons, which may have important implications for arctic food web dynamics and ecosystem functioning.

Heavy metal(loid) rich ash (≤10,000 mg kg−1 total As, Cr, Cu and Zn) originating from the combustion of contaminated wood was subjected to several experimental procedures involving its incorporation into an upland pasture soil. Ash was added to soil that had been prior amended with local cattle manure, replicating practices employed at the farm scale. Metal(loid) concentrations were measured in soil pore water and ryegrass grown on soil/manure plus ash mixtures (0.1–3.0% vol. ash) in a pot experiment; toxicity evaluation was performed on the same pore water samples by means of a bacterial luminescence biosensor assay. Thereafter a sequential extraction procedure was carried out on selected soil, manure and ash mixtures to elucidate the geochemical association of ash derived metal(loid)s with soil constituents. Predictive modelling was applied to selected data from the pot experiment to determine the risk of transfer of As to meat and milk products in cattle grazing pasture amended with ash.The inclusion of manure to soils receiving ash reduced phyto-toxicity and increased ryegrass biomass yields, compared to soil with ash, but without manure. Elevated As and Cu concentrations in pore water and ryegrass tissue resulting from ash additions were reduced furthest by the inclusion of manure due to an increase in their geochemical association with organic matter. Zinc was the only measured metal(loid) to remain uniformly soluble and bioavailable regardless of the addition of ash and manure. Risk modelling on pot experimental data highlighted that an ash addition of >1% (vol.) to this pasture soil could result in As concentrations in milk and meat products exceeding acceptable limits.The results of this study therefore suggest that even singular low doses of ash applied to soil increase the risk of leaching of metal(loid)s and intensify the risk of As transfer in the food chain.

In southern Québec, supplement roadside ground covers (i.e. Trifolium spp.) struggle to establish near edges of major roads and thus fail to assist turf recruitment. It creates empty niches vulnerable to weed establishment such as common ragweed (Ambrosia artemisiifolia). We hypothesized that heavy metal stresses may drive such species shifts along roadside edges. A growth chamber experiment was conducted to assess effects of metals (Zn, Pb, Ni, Cu, and Cd) on germination and seedling behaviors of roadside weed (A. artemisiifolia) and ground cover legumes (Coronilla varia, Lotus corniculatus, and Trifolium arvense). All metals inhibited T. arvense germination, but the effect was least on A. artemisiifolia. Low levels of Pb and Ni promoted germination initiation of A. artemisiifolia. Germination of L. corniculatus was not affected by Zn, Pb, and Ni, but inhibited by Cu and Cd. Germination of C. varia was decreased by Ni, Cu, and Cd and delayed by Zn and Pb. Metal additions hindered seedling growth of all test species, and the inhibitory effect on the belowground growth was greater than on the aboveground growth. Seedling mortality was lowest in A. artemisiifolia but highest in T. arvense when exposed to the metal treatments. L. corniculatus and C. varia seedlings survived when subjected to high levels of Zn, Pb, and Cd. In conclusion, the successful establishment of A. artemisiifolia along roadside edges can be associated with its greater tolerance of heavy metals. The findings also revealed that L. corniculatus is a potential candidate for supplement ground cover in metal-contaminated roadside edges in southern Québec, especially sites contaminated with Zn and Pb.