Sulfonated and hydroxy-sulfonated PCBs were recently discovered by our group as new PCB soil contaminants, constituting about 1% of their parent compounds in soil. Here we investigate for the first time the bioaccumulation of these metabolites as well as hydroxy-PCBs and native PCBs in earthworms. A sequence of three experiments, at increasing complexity and ecological realism, were performed with four different earthworm species (Eisenia foetida Savigny, Lumbricus terrestris L, Allolobophora chlorotica Savigny and Aporrectodea caliginosa Savigny) exposed to contaminated soils. The first experiment confirmed that when exposing earthworms to soil contaminated with a single hexa-chlorinated congener (PCB 155), no formation of polar metabolites in earthworms could be detected. This allowed to plan the following two experiments, using a soil from a PCB contaminated site and rich in relatively high levels (10–130 μg kg⁻¹) of hydroxy-, sulfonated-, and hydroxy-sulfonated-PCBs. Bioaccumulation factors (BAFs) and bioconcentration factors (BCFs) were then obtained in the second and third experiments, to compare the accumulation behavior of these chemicals in laboratory and natural conditions. Regressions between BAF/BCF and Log Kow/Log D, produced a variety of results, being generally significant between BCF and PCBs and not significant in the other cases. In general, the metabolites accumulated in earthworms with detectable concentrations in their tissues (8–115 μg kg⁻¹), although sulfonated and hydroxy-sulfonated PCBs showed BAF and BCF values lower (up to two orders of magnitude) than those calculated for the parent PCBs, given their lower lipophilicity.

With the wide utilization of organophosphate esters (OPEs) in recent years, OPEs have been detected more frequently in the aquatic environment. However, the distribution of OPEs in drinking source water has rarely been investigated across a large region. In this study, the occurrence and distribution of 13 OPEs were investigated in 23 source water sites from Northeast to Southeast (spacing greater than 3320 km) with a direct injection ultra-performance liquid chromatography-tandem mass spectrometry (UPLC–MS/MS) method. Total OPEs ranged from 218.8 to 636.6 ng/L, with a mean of 380.8 ng/L. The average detected concentration of OPEs in southern cities was higher than that in northern cities. Chlorinated OPEs accounted for 64.74% of the total concentration. Triethyl phosphate (TEP), tri (2-chloroethyl) phosphate (TCEP), and tri (chloropropyl) phosphate (TCPP) were detected in all water samples. Rainfall is a significant factor that affects the OPE concentration (less rainfall, higher concentration). China's OPE concentrations have rapidly reached a median level when compared to those of other countries. Ecological risk assessment showed that most OPEs have no or low risk to organisms (fish, crustacea, algae), except tricresyl phosphate (TCP), which is medium risk. The risk of OPEs in less-rain regions needs to be of greater concern, especially TCP.

Many researches mention the need to identify the land-based sources of riverine macrolitter but few field data on litter amount, composition and sources are available in the scientific literature. Describing macrolitter hotspot dynamics would actually allow a better estimation of fluxes in the receiving environments and a better identification of the more appropriate mitigation strategies. This study provides new insights in roadway macrolitter production rates, typologies and input sources (i.e. deliberate or accidental). The macrolitter from an 800 m portion of a highly frequented roadway (around 90,000 vehicles per day) was collected during almost one year. Typologies were defined using the OSPAR/TGML classification. Results show high annual loads of macrolitter (42.8 kg/yr/ha), suggesting significant contributions of the road runoff to the litter fluxes in urban stormwater. Over the course of a year, 88.5 kg of debris were collected, including 53.2 kg (60%) of plastic debris. In total, 36,439 items were characterized, of which 84% were plastics. The macrodebris collected present a low diversity of components with Top 10 items accounting for 92% by count and a majority of small and lightweight items like plastic fragments (31%) or cigarette butts (18%). Input sources were estimated for 43% of the mass collected in which 37.2% were deliberately littered and 62.8% were accidental leaks, illustrating a major contribution of uncovered trucks and unsecured loads. The accumulation rates show a linear correlation with the road traffic. Such data are of prime interest since they enable to determine the potential contribution of road traffic to plastic fluxes to the environment.

Cell phone use and radio-frequency electromagnetic radiation (RF-EMF) are rapidly increasing and may be associated with lower semen quality, yet results from epidemiological studies are inconclusive. Information on electronic devices use was collected through standard questionnaires from 1454 men aged 22–45 years old. Semen volume, sperm concentration, total sperm count, total motility, progressive motility, and normal morphology in repeated specimens were determined by trained clinical technicians. Percent changes [95% confidence intervals (CIs)] were estimated as (10ᵝ−1) × 100 for electronic devices use associated with repeated sperm quality parameters in the linear mixed-effect models. After adjusting for multiple confounders, we found significant inverse associations of total duration of electronic devices use with sperm progressive motility and total motility, duration of cell phone and computer use with sperm concentration, progressive motility, and total motility (all P < 0.05). No significant association was found between cell phone/computer use alone and sperm quality parameters. Moreover, per hour increase of time spent on cell phone talking was associated with decreased sperm concentration and total count by an average of −8.0% (95% CI: −15.2%, −0.2%) and −12.7% (95% CI: −21.3%, −3.1%), respectively. Besides, daily calling time was associated with lower sperm progressive motility and total motility among those who used headsets during a call (P for interaction <0.05). In conclusion, our study suggested that more time spent on electronic devices use had a modest reduction effect on semen quality. Daily calling time was significantly associated with lower sperm concentration and total count, and using headsets during a call appeared to aggravate the negative association between daily calling time and sperm motility. Additional studies are needed to confirm these findings.

Numerous onshore oil production wells currently exist, and the petroleum hydrocarbon contamination of the surrounding soil caused by oil production wells is not well understood. Moreover, the impact of the distribution of the total petroleum hydrocarbons (TPH) in the soil on the microbiota requires further investigation. Accordingly, in this study, the distribution of petroleum hydrocarbons in the soils around oil production wells was investigated, and their alteration of the microbiota was revealed. The results revealed that in the horizontal direction, the heavily TPH-contaminated soils were mainly distributed within a circle with a radius of 200 cm centered on the oil production well; and in the vertical direction, the heavily TPH-contaminated soils were distributed within the 0–50 cm soil layer. A significant positive correlation was found between the microbial abundance and the TPH concentration in the soil with relatively low total carbon contents. Heavy TPH contamination (TPH concentration of >3000 mg/kg) significantly reduced the microbial diversity and altered the microbiota compared with the light TPH contamination (TPH concentration of around 1000 mg/kg). In the heavily TPH-contaminated soils, the relative abundances of the Proteobacteria and Bacteroides increased significantly; the network complexity among the soil microorganisms decreased; and the co-occurrence patterns were altered. In summary, the results of this study have reference value in the remediation of soils around oil production wells and provide guidance for the construction of microbial remediation systems for petroleum contamination.

Mercury (Hg) is a widespread heavy metal causing various damages to health, while insufficient studies assessed its exposure risk across China. This study explored concentrations in food items and dietary exposure risks across China by comprehensively analyzing the researches on total Hg (THg) in eight food items and methylmercury (MeHg) in aquatic foods published between 1980 and 2021. According to the included 695 studies, the average THg concentration in all food items was 0.033 mg/kg (ranging from 0.004 to 0.185 mg/kg), with the highest concentration in edible fungi. The average daily dietary THg exposure from all foods was 12.9 μg/day. Plant-based foods accounted for 62.7% of the dietary THg exposure. Cereals and vegetables were the primary source of THg exposure. The MeHg concentration in aquatic foods was 0.08 mg/kg, and the average dietary exposure was 3.8 μg/day. Monte Carlo simulations of the dietary exposure risk assessment of THg and MeHg showed that approximately 6.4 and 7.0% of residents exceeded the health-based guidance value set by the European Food Safety Authority, with higher exposure risk in Southwest and South China. The nationwide target hazard quotient index of THg was greater than 1, suggesting that the non-carcinogenic risk of dietary exposure to THg needed further concern. In summary, this study has a comprehensive understanding of dietary Hg exposure risks across China, which provide a data basis for Hg exposure risk assessment and policy formulation.

Exposure measurement error is an important source of bias in epidemiological studies. We assessed the validity of employing ambient (outdoor) measurements as proxies of personal exposures at individual levels focusing on fine particles (PM₂.₅) and black carbon (BC)/elemental carbon (EC) on a global scale. We conducted a systematic review and meta-analysis and searched databases (ISI Web of Science, Scopus, PubMed, Ovid MEDLINE®, Ovid Embase, and Ovid BIOSIS) to retrieve observational studies in English language published from 1 January 2006 until 5 May 2021. Correlation coefficients (r) between paired ambient (outdoor) concentration and personal exposure for PM₂.₅ or BC/EC were standardized as effect size. We used random-effects meta-analyses to pool the correlation coefficients and investigated the causes of heterogeneity and publication bias. Furthermore, we employed subgroup and meta-regression analyses to evaluate the modification of pooled estimates by potential mediators. This systematic review identified thirty-two observational studies involving 1744 subjects from ten countries, with 28 studies for PM₂.₅ and 11 studies for BC/EC. Personal PM₂.₅ exposure is more strongly correlated with ambient (outdoor) concentrations (0.63, 95% confidence interval [CI]: 0.57–0.68) than personal BC/EC exposure (0.49, 95% CI: 0.38–0.59), with significant differences in ṝ (0.14, 95% CI: 0.03–0.25; p < 0.05). The results demonstrated that the health status of participants was a significant modifier of pooled correlations. In addition, the personal to ambient (P/A) ratio for PM₂.₅ and average ambient BC/EC levels were potential effect moderators of the pooled ṝ. The funnel plots and Egger's regression test indicated inevident publication bias. The pooled estimates were robust through sensitivity analyses. The results support the growing consensus that the validity coefficient of proxy measures should be addressed when interpreting results from epidemiological studies to better understand how strong health outcomes are affected by different levels of PM₂.₅ and their components.

Since lead, cadmium and arsenic have completely opposite chemical behaviors, it is very difficult to stabilize all these three heavy metals simultaneously. Herein, a novel iron-doped hydroxyapatite composite (Fe-HAP) was developed via an ultrasonic-assisted microwave hydrothermal method for the simultaneous remediation of lead-, cadmium-, and arsenic-co-contaminated soil in Hunan Province, South China. Using DTPA/sodium bicarbonate extractant to extract bioavailable Pb, Cd and As in soil after Fe-HAP remediation for 60 days, the immobilization efficiencies were 79.77%, 51.3% and 37.5% for Pb, Cd and As, respectively. The soil extractable and exchangeable fractions of Pb, Cd and As decreased significantly. In batch experiments, the adsorption kinetics of Pb, Cd and As on Fe-HAP were well described by pseudo-second-order models, indicating that the adsorption is controlled by chemisorption. In the Langmuir adsorption isotherm, the maximum adsorption capacities of Cd²⁺ and As(V) were 476.2 mg g⁻¹ and 195.69 mg g⁻¹, respectively, while Pb²⁺ fit the Freundlich model better. The XRD, SEM and XPS analyses indicated that Fe-HAP formed stable minerals of Pb₅(PO₄)₃OH, Cd₃(PO₄)₂·4H₂O, Cd(OH)₂ and Fe₃(AsO₄)₂·6H₂O with Pb, Cd and As. Overall, its facile and efficient immobilization performance indicate that Fe-HAP has potential for practical applications in integrative remediation of Pb-, Cd-, and As- co-contaminated soil.

The accumulation of arsenic in crop plants has become a worldwide concern that affects millions of people. The major source of arsenic in crop plants is irrigation water and soil. In this study, Serendipita indica, an endophytic fungus, was used to investigate the protection against arsenic and its accumulation in the tomato plant. We found that inoculation of S. indica recovers seed germination, plant growth and improves overall plant health under arsenic stress. A hyper-colonization of fungus in the plant root was observed under arsenic stress, which results in reduced oxidative stress via modulation of antioxidative enzymes, glutathione, and proline levels. Furthermore, fungal colonization restricts arsenic mobilization from root to shoot and fruit by accumulating it exclusively in the root. We observed that fungal colonization enhances the arsenic bioaccumulation factor 1.48 times in root and reduces the arsenic translocation factor by 2.96 times from root to shoot and 13.6 times from root to fruit compared to non colonized plants. Further, investigation suggests that S. indica can tolerate arsenic by immobilizing it on the cell wall and accumulating it in the vacuole. This study shows that S. indica may be helpful for the reduction of arsenic accumulation in crops grown in arsenic-contaminated agriculture fields.

The iron and steel industry (ISI) is one of the most energy-intensive industries in China, which makes a substantial contribution to the emissions of air pollutants. Among the various manufacturing processes, sintering is the major emitting process, which shares over half of the emissions of sulfur dioxide (SO₂), nitrogen oxide (NOₓ) and particulate matter (PM) for the entire industry. In this study we made a comprehensive evaluation of the air pollutant emissions from the sintering process of China's ISI in 2017 based on the Continuous Emission Monitoring System (CEMS) database and estimated the future reduction potentials. We found that there was a general decreasing trend of emission concentrations in the sintering flue gas in response to the strengthened emission control policies, but the mild increase of the oxygen content in the second half of the year flattened the decreasing trend, indicating the necessity for simultaneous control of the oxygen content in the flue gas. Despite the relative high standard-reaching rates of 90% to the emission concentration limits in GB 28662-2012, the standard-reaching rates to the ultra-low emission standards were only 12%, 40% and 27% for NOₓ, SO₂ and PM respectively, with the lowest value mostly occurred in the western provinces. In 2017, the NOₓ, SO₂ and PM emissions from the sintering process were 378.6 kt, 169.0 kt and 51.9 kt, respectively. If the ultra-low emission standards were met, the corresponding NOₓ, SO₂ and PM emissions would decrease by 69.9%, 52.9%, and 56.4% respectively, illustrating large emission reducing potentials by achieving the ultra-low emission standards.