Fly ash (FA), a solid waste generated in thermal power plants, is considered an environmental pollutant. Therefore, measures must be taken to dispose of FA in an environmentally friendly manner. In this paper, an electrospinning technique was employed to incorporate FA particles onto zinc oxide nanofibers (ZnO NFs), and the product (FA/ZnO composite) was used for the removal of methylene blue (MB) from the water. Herein, ZnO NFs may serve as effective semiconductor photocatalysts and provide sufficient surface area for FA, while the FA particles serve as an effective adsorbent. The adsorption capacity and photocatalytic efficiency of the as-synthesized nanocomposite fibers were enhanced compared to those of the pristine ZnO NFs, and this result is attributed to the uniform distribution of FA on the surface of the ZnO NFs. The as-synthesized nanocomposite could have great significance in wastewater treatment.

This study assessed the impact on air quality and health risk by long-range transported (LRT) PM2.5-10- and PM2.5-bound metals and PAHs in Taipei City, Taiwan. Several methods with receptor aerosol measurements were used to quantify the effect of LRT. The hybrid single particle lagrangian integrated trajectory model (HYSPLIT) was used in conjunction with the potential source contribution function (PSCF) to distinguish the LRT aerosols. By using a general linear model (GLM) with a marginal mean and positive matrix fraction (PMF), this study also evaluated the annual increased level of LRT (AIRLRT) for each source contribution to the concentration and the resultant health risk of particle-bound metals and polycyclic aromatic hydrocarbons (PAHs). The LRT influenced fine-sized metals and PAHs rather than coarse-sized ones. We found that the level of PM2.5-bound toxic metals (Pb, Cd, and As) and PAHs (Benzo[a]pyrene and dibenzo[a,e]pyrene) could increase by 90% under the influence of LRT in 2014, while an AIRLRT value of 25% for the PM2.5 mass concentration was observed. Overall, the excess cancer risk (ECR) resulting from PM2.5-bound metal and PAH exposures was 6.40 × 10−5 in relation to coal combustions (20.7%), traffic-related emissions (59.7%) and re-suspended aerosols (19.6%). Among these contributors, LRT-related metals and PAHs in PM2.5 accounted for 51% of the total ECR.

The high acidity of mercury ions (Hg²⁺) contained wastewater can complicate its safe disposal. MgAl-LDHs supported [SnS₄]⁴⁻ clusters were synthesized for Hg²⁺ removal from acid wastewater. The active sites of [SnS₄]⁴⁻ clusters were inserted into the interlayers of MgAl-LDHs using an ion-exchange method. The experimental results indicated that [SnS₄]⁴⁻/MgAl-LDHs composite can obtain higher than 99% Hg²⁺ removal efficiency under low pH values. The maximum mercury adsorption capacity is 360.6 mg g⁻¹. It indicated that [SnS₄]⁴⁻ clusters were the primary active sites for mercury uptake, existing as stable Hg₂(SnS₄) on the surface of the composite. Under low pH values, such a composite seems like a “net” for HgSO₄ molecules, exhibiting great potential for mercury removal from acid solutions. Moreover, the co-exist metal ions such as Zn²⁺, Na⁺, Cd²⁺, Cr³⁺, Pb²⁺, Co²⁺, and Ni²⁺ have no significant influences on Hg²⁺ removal. The adsorption isotherms and kinetics were also studied, indicating that the adsorption mechanism follows a monolayer chemical adsorption model. The [SnS₄]⁴⁻/MgAl-LDHs composite exhibits a great potential for Hg²⁺ removal from acid wastewater.

Polycyclic aromatic hydrocarbons (PAHs) remain a focal concern of the air pollution in China. To discriminate the sources of airborne PAHs in Chinese rural regions, a national-scale tree bark sampling campaign and emission inventory estimation were conducted. The concentrations of the sum of 16 U.S. EPA priority PAHs in rural bark ranged from 6.30 to 3803 ng/g, with the dominance of 3- and 4-ring PAHs. Bark residual PAH concentration correlated significantly with emission flux rate, bark lipid content, ambient PM₂.₅, precipitation and sampling location. Based on the information of emission data, bark PAH congener profiles, principal component analysis, diagnostic ratios and compound-specific isotope analysis, solid fuel combustion was identified as the major source and could explain 40.3%–46.4% of bark PAH residues in rural China. The δ¹³C values of most individual PAHs were more negative at sites with lower longitude and latitude, suggesting a greater contribution of biomass combustion to PAH residues. Our results suggest the importance of regulating solid fuel combustion to significantly improve the air quality in China, and bark samples can provide a wealth of information on effectively monitoring and controlling the sources of PAH emission in rural China.

A comprehensive analysis of 15 target chemical compounds (pharmaceuticals and personal care product, perfluoroalkyl compounds and industrial chemicals) were carried out to determine their concentrations in selected commercially exploited, wild caught small and medium sized pelagic fish species and their organs (Thyrsites atun (snoek), Sarda orientalis (bonito), Pachymetopon blochii (panga) and Pterogymnus laniarius (hottentot)) obtained from Kalk Bay harbour, Cape Town. Solid phase extraction (SPE) method based on Oasis HLB cartridges were used to concentrate and clean-up the samples. Liquid chromatography–mass spectrometry analysis of these chemical compounds revealed the simultaneous presence of at least 12 compounds in different parts of the selected fish species in nanogram-per-gram dry weight (ng/g dw) concentrations. The results revealed that perfluorodecanoic acid, perfluorononanoic acid and perfluoroheptanoic acid were the most predominant among the perfluorinated compounds and ranged between: (20.13–179.2 ng/g), (21.22–114.0 ng/g) and (40.06–138.3 ng/g). Also, diclofenac had the highest concentration in these edible fish species out of all the pharmaceuticals detected (range: 551.8–1812 ng/g). The risk assessment values were above 0.5 and 1.0 for acute and chronic risk respectively which shows that these chemicals have a high health risk to the pelagic fish, aquatic organisms and to humans who consume them. Therefore, there is an urgent need for a precautionary approach and the adequate regulation of the use and disposal of synthetic chemicals that persist in aquatic/marine environment in this province and other parts of South Africa, to prevent impacts on the sustainability of our marine environment, livelihood and lives.

Elevated inorganic arsenic concentrations in groundwater has become a major public and environmental health concern in different parts of the world. Currently, As-contaminated groundwater issue in many countries and regions is a major topic for publications at global level. However, there are many regions worldwide where the problem has still not been resolved or fully understood due to inadequate hydrogeochemical investigations. Hence, this study evaluates for the first time the hydrogeochemical behavior of the arid and previously unexplored inland basin of Sirjan Plain, south east (SE) Iran, in order to assess the controlling factors which influence arsenic (As) mobility and its distribution through groundwater resources. Total inorganic arsenic concentration was measured using inductive-coupled plasma optical emission spectrometry (ICP-OES). Arsenic content in groundwater of this region ranged between 2.4 and 545.8 μg/L (mean value: 86.6 μg/L) and 50% of the samples exceeded the World Health Organization (WHO) guideline value of 10 μg/L in drinking water. Groundwater was mainly of Na-Cl type and alkaline due to silicate weathering, ion exchange and evaporation in arid conditions. Elevated As concentrations were generally observed under weakly alkaline to alkaline conditions (pH > 7.4). Multivariate statistical analysis including cluster analysis and bi-plot grouped As with pH and HCO3 and demonstrated that the secondary minerals including oxyhydroxides of Fe are the main source of As in groundwater in this region. The desorption of As from these mineral phases occurs under alkaline conditions in oxidizing arid environments thereby leading to high levels of As in groundwater. Moreover, evaporation, ion exchange and saltwater intrusion were the secondary processes accelerating As release and its mobility in groundwater. Based on the results of this study, desorption of As from metal oxy-hydroxides surfaces under alkaline conditions, evaporation and intrusion of As-rich saline water are considered to be the major factors causing As enrichment in arid inland basins such as those in southeast Iran. This study proposes the regular monitoring and proper groundwater management practices to mitigate high levels of arsenic in groundwater and related drinking water wells of Sirjan Plain.

Rapid urbanization created unique urban environment with a characteristic of dramatic modification of land cover, consequently causing profound perturbations in the transport and fate of pollutants in urban ecosystem. Taking a hyper-urbanization city (Shanghai) as an example to reveal the influence of urbanization development on pollutant footprint, this study reconstructed and compared historical evolutions of elemental carbon (EC) and polycyclic aromatic hydrocarbons (PAHs) based on two lake sediment cores (DSL: Dianshan Lake; LXL: Luxun Lake) from early- and newly-urbanized areas, respectively. Historical fluxes of EC and total PAH (Σ₁₆PAHs) showed similar and sharply fluctuant increases occurring after the 1950s in the DSL core later than the LXL core after the 1900s. In modern times (after 2000), the mean fluxes of EC and Σ₁₆PAHs in the LXL core were 2.68- and 1.38-fold greater than those in the DSL core, respectively, indicating the stronger influence from more intensive human activities and longer industrial history in early urbanized area. Based on the significant correlations among socioeconomic factors with EC and Σ₁₆PAH fluxes, the extended STIRPAT (stochastic impacts by regression on population, affluence and technology) models were successfully constructed, revealing that significance of these driving factors were in the order of population > the proportion of heavy industry > coal consumption > gross domestic product (GDP) per capita > vehicle amount. In general, the obvious discrepancy in historical stage and intensity of sedimentary EC and PAH accumulations implied that some newly fast-developing cities still have a chance to adjust urban development strategy to avoid more serious pollution.

Hydrotalcite (HT) is a layered double hydroxide (LDH), which is considered as a potential adsorbent to remove anion contaminants. In this study, adsorption of chromate (CrO₄) and phosphate (PO₄) on HT was conducted at various pH and temperatures. Related adsorption mechanisms were determined via the isotherm, kinetic, and competitive adsorption studies as well as the Cr K-edge X-ray absorption fine-structure (XAFS) spectroscopy. The maximum adsorption capacities for CrO₄ and PO₄ on HT were 0.16 and 0.23 mmol g⁻¹. Regarding adsorption kinetics, CrO₄ and PO₄ adsorption on HT could be well described by the second order model, and the rate coefficient of CrO₄ and PO₄ on HT decreased significantly with the increasing pH from 5 to 9. The adsorption kinetics for CrO₄ and PO₄ were divided into fast and slow stages with the boundary at 15 min. This biphasic adsorption behavior might be partially attributed to multiple reactive pathways including anion exchange and surface complexation. Fitting results of Cr K-edge EXAFS analysis showed a direct bonding between CrO₄ and Al on HT surfaces. Such a surface complexation appeared to be the rate-limiting step for CrO₄ adsorption on HT. By contrast, the diffusion through the hydrated interlayer space of HT was the major rate-limiting step for PO₄. This study determined the adsorption behaviors of CrO₄ and PO₄ on HT, including the initial transfer process and the subsequent adsorption mechanisms. Such information could improve the strategy to use HT as the potential adsorbent for the remediation of anionic pollutants.

Fine particulate matter (Particulate matter with diameter ≤ 2.5 μm) is associated with multiple health outcomes, with varying effects across seasons and locations. It remains largely unknown that which components of PM₂.₅ are most harmful to human health.We systematically searched all the relevent studies published before August 1, 2018, on the associations of fine particulate matter constituents with mortality and morbidity, using Web of Science, MEDLINE, PubMed and EMBASE. Studies were included if they explored the associations between short term or long term exposure of fine particulate matter constituents and natural, cardiovascular or respiratory health endpoints. The criteria for the risk of bias was adapted from OHAT and New Castle Ottawa. We applied a random-effects model to derive the risk estimates for each constituent. We performed main analyses restricted to studies which adjusted the PM₂.₅ mass in their models.Significant associations were observed between several PM₂.₅ constituents and different health endpoints. Among them, black carbon and organic carbon were most robustly and consistently associated with all natural, cardiovascular mortality and morbidity. Other potential toxic constituents including nitrate, sulfate, Zinc, silicon, iron, nickel, vanadium, and potassium were associated with adverse cardiovascular health, while nitrate, sulfate and vanadium were relevant for adverse respiratory health outcomes.Our analysis suggests that black carbon and organic carbon are important detrimental components of PM₂.₅, while other constituents are probably hazardous to human health. However, more studies are needed to further confirm our results.

Mangroves act as sinks for terrigenous pollutants to alleviate their influence on offshore marine ecosystem. The nationwide study of PBDEs contamination in mangrove wetlands of China has not been explored, and their risk for human health lack quantitative analysis. In this study, sediment samples were collected in six mangrove wetlands along coastal area of South China to evaluate the levels, congener distributions and ecological risks of eight PBDEs, including BDE-28, -47, −99, −100, −153, −154, −183, and −209. Levels of ∑PBDEs (the sum of seven PBDEs except BDE-209) and BDE-209 were 0.13–2.18 ng g−1 and 1.44–120.28 ng g−1, respectively. In particular, mean level of BDE-209 was highest in Futian, followed by Yunxiao, Fangchenggang, Zhanjiang, Dongzhaigang, and Dongfang. As dominant PBDE congener, BDE-209 accounted for 63.6%–99.1% of the total PBDEs, suggesting the major sources of commercial deca-BDE mixtures. Among seven PBDE congeners except BDE-209, slightly different percentages of PBDE congeners were detected, with BDE-154, -47, and −100 being predominant congeners. Positive relationship was observed for total organic matter (TOM) with BDE-209, with no such relationships found for particle size compositions (clay, silt and sand). As for sediment-dwelling organism, the ecological risks from tri-, tera-, and hexa-BDE congeners could be negligible, and those from penta- and deca-BDE congeners were low or moderate, indicating major ecological risk drivers of penta- and deca-BDE congeners in mangrove wetlands in China. The ecological risk of PBDEs in mangrove sediments for human health was thought to be consumption of fish which would bioaccumulate PBDEs from the contaminated sediment. As for human health, the levels of non-cancer risks of PBDEs were all lower than 1, and the cancer risk was far less than the threshold level (10−6), demonstrating low risk for human health.