Neonicotinoid insecticides can be transported from agricultural fields, where they are used as foliar sprays or seed treatments, to surface waters by surface or sub-surface runoff. Few studies have investigated the toxicity of neonicotinoid or the related butenolide insecticides to freshwater mollusk species. The current study examined the effect of neonicotinoid and butenolide exposures to the early-life stages of the ramshorn snail, Planorbella pilsbryi, and the wavy-rayed lampmussel, Lampsilis fasciola. Juvenile P. pilsbryi were exposed to imidacloprid, clothianidin, or thiamethoxam for 7 or 28 d and mortality, growth, and biomass production were measured. The viability of larval (glochidia) L. fasciola was monitored during a 48 h exposure to six neonicotinoids (imidacloprid, thiamethoxam, clothianidin, acetamiprid, thiacloprid, or dinotefuran), or a butenolide (flupyradifurone). The 7-d LC50s of P. pilsbryi for imidacloprid, clothianidin, and thiamethoxam were ≥4000 μg/L and the 28-d LC50s were ≥182 μg/L. Growth and biomass production were considerably more sensitive endpoints than mortality with EC50s ranging from 33.2 to 122.0 μg/L. The 48-h LC50s for the viability of glochidia were ≥456 μg/L for all seven insecticides tested. Our data indicate that neonicotinoid and butenolide insecticides pose less of a hazard with respect to mortality of the two species of mollusk compared to the potential hazard to other non-target aquatic insects.

Recent studies indicate that while unfunctionalized carbon nanomaterials (CNMs) exhibit very low decomposition rates in soils, even minor surface functionalization (e.g., as a result of photochemical weathering) may accelerate microbial decay. We present results from a C60 fullerene-soil incubation study designed to investigate the potential links between photochemical and microbial degradation of photo-irradiated C60. Irradiating aqueous ¹³C-labeled C60 with solar-wavelength light resulted in a complex mixture of intermediate products with decreased aromaticity. Although addition of irradiated C60 to soil microcosms had little effect on net soil respiration, excess ¹³C in the respired CO2 demonstrates that photo-irradiating C60 enhanced its degradation in soil, with ∼0.78% of 60 day photo-irradiated C60 mineralized. Community analysis by DGGE found that soil microbial community structure was altered and depended on the photo-treatment duration. These findings demonstrate how abiotic and biotic transformation processes can couple to influence degradation of CNMs in the natural environment.

This research evaluates the analytical capabilities of a field portable X-ray fluorescence spectrometer (pXRF) for the measurement of contaminated soil samples using a matrix-matched calibration. The calibrated pXRF generated exceptional data quality from the measurement of ten soil reference materials. Elemental recoveries improved for all 11 elements post-calibration with reduced measurement variation and detection limits in most cases. Measurement repeatability of reference values ranged between 0.2 and 10% relative standard deviation, while the majority (82%) of reference recoveries were between 90 and 110%. Definitive data quality, the highest of the US EPA's three level quality ranking, was achieved for 15 of 19 elemental datasets. Measurement comparability against inductively coupled plasma atomic emission spectrometry (ICP-AES) values was excellent for most elements (e.g, r2 0.999 for Mn and Pb, r2 > 0.995 for Cu, Zn and Cd). Parallel measurement of reference materials revealed ICP-AES and ICP-MS measured Ti and Cr poorly when compared to pXRF. Individual recoveries of soil reference materials by both ICP-AES and pXRF showed that pXRF was equivalent to or better than ICP-AES values for all but two elements (Ni, As). This study demonstrates pXRF as a suitable alternative to ICP-AES analysis in the measurement of Ti, Cr, Mn, Fe, Cu, Zn, Sr, Cd, and Pb in metal-contaminated soils. Where funds are limited, pXRF provides a low-cost, high quality solution to increasing sample density for a more complete geochemical investigation.

The Kuril Islands region is considered promising for development of salmon aquaculture. There are 41 salmon fish hatcheries in the Sakhalin Island and the Kuril Islands, 34 of them are hatcheries of the chum. Therefore, concentrations of six elements (Zn, Cu, Cd, Pb, As, and Hg) were determined in chum salmon were caught in this region. The contents of toxic elements (Cd, Pb, As, and Hg) don't exceed their maximum permissible concentrations (MPC) according to the Russian sanitary standards, but concentration of Pb are closely to MPC. Increased concentrations of Pb in wild chum have the natural origin. The unusual conditions of the Western Pacific are formed under the influence such factors as volcanism and upwelling.

This study investigated the effect of fulvic acid (FA) on the colloidal stability and reactivity of nano zero-valent iron (nZVI) at pH 5, 7 and 9. The sedimentation behavior of nZVI differed at different pH. A biphasic model was used to describe the two time-dependent settling processes (i.e., a rapid settling followed by a slower settling) and the settling rates were calculated. Generally, the settling of nZVI was more significant at the point of zero charge (pHpzc), which could be varied in the presence of FA due to the adsorption of FA on the nZVI surface. More FA was adsorbed on the nZVI surface at pH 5–7 than pH 9, resulting in the varying sedimentation behavior of nZVI via influencing the electrostatic repulsion among particles. Moreover, it was found that there was a tradeoff between the stabilization and the reactivity of nZVI as affected by the presence of FA. When FA concentration was at a low level, the adsorption of FA on the nZVI surface could enhance the particle stabilization, and thus facilitating the Cr(VI) reduction by providing more available surface sites. However, when the FA concentrations were too high to occupy the active surface sites of nZVI, the Cr(VI) reduction could be decreased even though the FA enhanced the dispersion of nZVI particles. At pH 9, the FA improved the Cr(VI) reduction by nZVI. Given the adsorption of FA on the nZVI surface was insignificant and its effect on the settling behavior of nZVI particles was minimal, it was proposed that the FA formed soluble complexes with the produced Fe(III)/Cr(III) ions, and thus reducing the degree of passivation on the nZVI surface and facilitating the Cr(VI) reduction.

Long-term effectiveness and persistence are two important criterias to evaluate alternative remediation technology of heavy metal polluted soils. Pot and field studies showed addition of sepiolite was effective in immobilizing Cd in polluted soils, with significant reduction in TCLP extracts (0.6%–49.6% and 4.0%–32.5% reduction in pot and field experiments, respectively) and plant uptake (14.4%–84.1% and 22.8%–61.4% declines in pot and field studies, correspondingly). However, the applications of sepiolite offered a limited guarantee for the safety of edible vegetables in Cd-polluted soils, depending on the soil type, the Cd pollution type and level, and the dose and application frequency of chemical amendments. Bioassays, such as plant growth, soil enzymatic activities and microbial community diversity, indicated a certain degree of recovery of soil metabolic function. Therefore, sepiolite-assisted in situ remediation is cost-effective, environmentally friendly, and technically applicable, and can be successfully used to reduce Cd enter into the food chain on field scale.

Antibiotic resistance genes (ARGs) are present in surface water and often cannot be completely eliminated by drinking water treatment plants (DWTPs). Improper elimination of the ARG-harboring microorganisms contaminates the water supply and would lead to animal and human disease. Therefore, it is of utmost importance to determine the most effective ways by which DWTPs can eliminate ARGs. Here, we tested water samples from two DWTPs and distribution systems and detected the presence of 285 ARGs, 8 transposases, and intI-1 by utilizing high-throughput qPCR. The prevalence of ARGs differed in the two DWTPs, one of which employed conventional water treatments while the other had advanced treatment processes. The relative abundance of ARGs increased significantly after the treatment with biological activated carbon (BAC), raising the number of detected ARGs from 76 to 150. Furthermore, the final chlorination step enhanced the relative abundance of ARGs in the finished water generated from both DWTPs. The total enrichment of ARGs varied from 6.4-to 109.2-fold in tap water compared to finished water, among which beta-lactam resistance genes displayed the highest enrichment. Six transposase genes were detected in tap water samples, with the transposase gene TnpA-04 showing the greatest enrichment (up to 124.9-fold). We observed significant positive correlations between ARGs and mobile genetic elements (MGEs) during the distribution systems, indicating that transposases and intI-1 may contribute to antibiotic resistance in drinking water. To our knowledge, this is the first study to investigate the diversity and abundance of ARGs in drinking water treatment systems utilizing high-throughput qPCR techniques in China.

For the first time in the current literature, the effect of titanium dioxide (TiO2) nanoparticles on the community structure of macroinvertebrates has been investigated in situ. Macroinvertebrates were exposed for 100 days to an environmentally relevant concentration of TiO2 nanoparticles, 25 mg kg−1 in sediment. Czekanowski's index was 0.61, meaning 39% of the macroinvertebrate community structure was affected by the TiO2 treatment. Non-metric multidimensional scaling (NMDS) visualized the qualitative and quantitative variability of macroinvertebrates at the community level among all samples. A distance-based permutational multivariate analysis of variance (PERMANOVA) revealed the significant effect of TiO2 on the macroinvertebrate community structure. The indicator value analysis showed that the relative frequency and abundance of Planorbarius corneus and Radix labiata were significantly lower in the TiO2 treatment than in the control. Meanwhile, Ceratopogonidae, showed a significantly higher relative frequency and abundance in the TiO2 treatment than in the control.

In order to better understand the exposure of aquatic systems to halogenated flame retardant contaminants, the present study investigated a variety of legacy and emerging flame retardants in common carp and largemouth bass collected from 58 stations across Illinois (United States). The data revealed that polybrominated diphenyl ethers (PBDEs) generally dominated the flame retardant residues in Illinois fish. Concentrations of ΣPBDEs (including all detectable PBDE congeners) ranged from 24.7 to 8270 ng/g lipid weight (median: 135 ng/g lw) in common carp and 15–3870 ng/g lw (median: 360 ng/g lw) in largemouth bass. In addition to PBDEs, Dechlorane analogues (i.e. Dec-603, Dec-604, and Chlordane Plus) were also frequently detected. Median concentrations of ΣDechloranes (including all detected Dechlorane analogues) were 34.4 and 23.3 ng/g lw in common carp and largemouth bass, respectively. Other emerging flame retardants, including tetrabromo-o-chlorotoluene (TBCT), hexabromobenzene (HBBZ), 2-ethylhexyltetrabromobenzoate (EH-TBB), and bis(2-ethylhexyl)-3,4,5,6-tetrabromo-phthalate (BEH-TEBP), were also detected in 40–78% of the fish at the monitored stations. Spatial analysis revealed significantly greater PBDE concentrations in fish living in impaired urban streams and lakes compared to those from the impaired agricultural and unimpaired agricultural/urban waters, demonstrating a significant urban influence on PBDE contamination. Future studies and environmental monitoring are recommended to focus on temporal trends of PBDEs and alternative flame retardants, as well as human exposure risks via edible fishes, in the identified Areas of Concern within Illinois.

It has been known that substitution is not a suitable method to address non-detect (ND) data and can result in significant errors. However, reports of reliable statistical methods for handling ND data of polychlorinated dibenzo-p-dioxin/furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in fish are rare. This work examines US-EPA's recommended statistical methods and traditional substitution-based methods for handling ND data in PCDD/F and DL-PCB datasets obtained from 240 fish samples. The Kaplan-Meier (KM) method was confirmed as a suitable statistical approach for dealing with our fish datasets. The results of the KM and substitution methods were compared; a significant difference was found in TEQs derived from KM and substitution for PCDD/Fs, suggesting that the handling of ND data is a critical issue for PCDD/Fs. For example, the substitution by ½LOD resulted in 20–25% overestimation of PCDD/F TEQs for fish samples with ND data (60–70%). In conclusion, the use of KM method is preferable for average TEQs, and if the use of KM is not applicable, substitution by zero is preferred. Based on this conclusion, the characteristics of fish contamination by PCDD/Fs and DL-PCBs in Korea were investigated.