In Latvia, birch is the second most widespread tree species; the share of birch is higher in private forests. The Forest Research Inventory that was launched in 2004 provides credible and up-to-date information about all forests of Latvia irrespective of the ownership. The data from first three years’ data base of this Project has been used in the present study. The aim of this study was to analyse birch stands in state and private forests concentrating on different aspects: mixture degree, origin of the stand, productivity and quality of the stand. 735 sample plots were selected from the database for the analysis. The proportion of the birch stands in the private forests was slightly higher than in the state forests. There were more mixed stands in the state forests than in the private ones. The standing volume was higher in the mixed stands while the opposite was true for the current annual volume increment of birch. The main regeneration method in both the state and private birch stands was natural regeneration from seed. Artificial regeneration was used only rarely in the private birch stands. The productivity did not differ significantly between the state and private forests; the same was true for the quality, expressed by the outcome of veneer logs. The stand quality differed significantly among site types, being the highest in the forests on dry mineral soils and the lowest in the forests on drained peat soils.

Prolonged summer drought periods are forecasted for the Baltic Sea region during the 21st century, thus increasing the risk of drought stress of saplings used in forest regeneration. Nevertheless, the vitality of young stands might be increased by the selection of suitable planting material. The aim of this study was to estimate the effect of changes in distribution of summer precipitation on height increment, biomass distribution and root morphology of Scots pine and silver birch planting material commonly used in the forest regeneration in Latvia. Containerized pine and bare rooted birch saplings, planted in three different soil types, were subjected to altered distribution of summer precipitation, provided by the use of automated shelter. Sheltered saplings were weekly irrigated with the sum of precipitation of a corresponding period, while afield planted saplings had an unchanged precipitation regime and served as control. Height increment was measured once per week and estimation of morphology of saplings was done after the end of every vegetation season. Significant (p is less than 0.05) differences in height increment, and shoot and root biomass were observed among the same planting material in different irrigation regimes and soil types. In the control plots of peat soil, pine had a significantly (p is less than 0.05) larger height increment while birch-significantly (p is less than 0.05) smaller compared to experiment. Forecasted longer drought periods might reduce the growth of Scots pine in fertile forest types but silver birch growth might be affected in fertile mineral soils in future.

The changes of areas of eight tree species in Lithuania during the past century were analysed. Aiming to apply the different approaches in forest studies, the Exponential smoothing method for forecasting the changes of the tree areas for the 25 years was used. The data dating from 1922 was analyzed as a time series. The descending trend was identified for Scots pine (Pinus sylvestris L.) and European ash (Fraxinus excelsior L.) and increasing trend – for Norway spruce (Picea abies (L.) H. Karst.), common oak (Quercus robur L.), birch species (Betula pubescens Ehrh. and Betula pendula Roth), black alder (Alnus glutinosa (L.) Gaertn.), European aspen (Populus tremula L.) and grey alder (Alnus incana (L.) Moench). The Exponential Trend with Multiplicative Seasonality (ET-MS) model was fitted for almost all investigated tree species with exception of European ash. For the latter species, the Damped Trend with Multiplicative Seasonality (DT-MS) model was chosen. Mean absolute percentage error of the model in all cases did not exceed 2%.

Thermal wood modification has been intensively studied in the recent decades because of the possibility to produce wood with improved biodurability and dimensional stability without use of harmful chemicals. Beside altered physical characteristics, wood colour is changed to lighter or darker brown as a result of thermal treatment. Growth of interest in thermal wood treatment has stimulated numerous researches concerned with discoloration of thermally modified wood which is subjected to light exposure. The objective of this study was to evaluate the colour stability of thermally modified hardwood during storage in the dark where wood discolouration is not photoinduced but rather a result of oxidative ageing. Three thermally modified hardwood species – aspen (Populus tremula L.), alder (Alnus incana Moench), birch (Betula pendula Roth.), where investigated. Wood discoloration was monitored by spectrophotometrical measurements of reflectance spectra and chromaticity parameter calculations using CIELAB colour system where L* is the lightness, and a* and b* are the chromatic coordinates. The colour stability of thermally modified wood as well as of untreated wood of the same species was examined by means of assessment of the colour parameter changes (ΔL*, Δa*, Δb*, ΔEab). All wood specimens under study discoloured during the experiment, but the colour change did not exceed two units that are common and accepted for wood products. Untreated and thermally modified wood showed different trends of discoloration during storage in the dark. The final colour changes that were fixed at the end of the experiment were greater for the thermally treated wood.

Economic importance of Silver birch in Latvia has been increasing in last decade, triggering scientific research, dedicated to improvement of this species, including tree breeding. Bulk of progeny trials will reach the evaluation time in next few years; therefore, decisions for further tree breeding activities have to be made. The aim of our study is to evaluate profitability of silver birch breeding, based on current situation in the year 2010 and circumstances in Latvia and assess the factors that might notably influence the result. Analysis considers all available breeding material and links between tree breeding, seed orchards and end product – forest stand, regenerated with improved plants in order to evaluate profitability of different alternatives based on differential approach. Results reveal that differential benefits from forest regeneration with selected birch material in comparison to natural regeneration, in areas with highest site indexes (Ia-II) with 3% interest rate and at least part of the stands managed in order to maximize yield of large diameter trees at age of final felling, are positive. The highest profitability can be reached if selection of best individuals is done based on clonal testing, genetic gain is maximized and combined with proper silvicultural praxis and annual planting area (utilization of seeds from selected trees) are maximized.

This brief review of the recent birch studies is focused on different aspects, such as species distribution, growing conditions, species identification, changes due to environmental factors. All mentioned investigations were carried out in Lithuania. This analytical study summarises the results and increases knowledge dissemination to the international audience. When reviewed and summarized considerable part of relevant literature sources, we realised new problems and challenges; for example, aiming to clarify the peculiarities of the growth and crown condition of the dominant birch species (Betula pendula Roth. and B. pubescens Ehrh.) under the changing climate and anthropogenic pollution.

The objective of this study is to evaluate the performance of models developed by Repola (2006) to estimate the vertical changes of the basic density of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies [L.] Karst), and birch spp. (mainly Betula pendula Roth) stemwood in the forests of Latvia and to develop a model for the estimation of average knot-free stem density with bark (SD) using diameter at breast height as an independent variable. The study material comprised a total of 81 spruce, 102 pine, and 105 birch stems representing a wide range of tree growing conditions in Latvia and covering all age classes. The knot-free stemwood density (SWD) of pine and birch demonstrate strong vertical dependence along the stem, while for spruce the variation pattern was less pronounced and seemed to be nearly constant along the stem. The SWD estimated by Repola’s models was 4.3% lower for spruce, but 3.4% higher for pine and 2.2% for birch comparing to average values obtained in this study. Sigmoidal regression equations constructed in our study explained 67%, 27% and 54% of variations for predicting SD for pine, spruce and birch, respectively. Birch stemwood has a highest basic SWD – 470 kg mE-3, followed by pine – 397 kg mE-3 and spruce – 385 kg mE-3. According to our results, the birch bark turned to be denser than the birch stemwood, being vice versa for the studied coniferous species.

The aim of the study was to compare the productivity and logging costs using the small class harvester Vimek 404 T5 in thinning of birch plantations and young coniferous stands. It was found in the study that due to a lower fuel consumption, maintenance costs and initial investment, the cost of a working hour of the harvester Vimek 404 T5 is significantly smaller than the cost of a working hour of the middle class harvester. The study confirmed that Vimek 404 T5 is a suitable harvester for thinning in a birch plantation; the study also confirmed the previous conclusions about the main advantages of Vimek harvester compared to a middle class harvester in the first thinning – low fuel consumption and costs of maintenance, high productivity and equipment compactness, which allow to reduce the strip road area. The average productivity for Vimek 404 T5 in birch plantation was 6.2 m**3 per productive hour, but in young conifer stand the productivity was 4.9 m**3 per productive hour. The average stem volume in the birch plantation was 0.06 m**3, but in conifer stand 0.05 m**3. Productivity for the same dimension trees in the birch plantation is not significantly different from the data obtained in the thinning of the coniferous stands.

The homogeneous and light wood of birch is suitable for different types of treatment processes and is highly valued for products where visual aspect is important, however, birch assortments are highly susceptible to damages caused by fungi during the storage. Such fungal damages cause discoloration of birch roundwood intended for further woodworking. Sapwood discoloration development and its influencing factors for birch roundwood were analyzed in the summer - autumn period of the year 2016 (August, September and October). Control cut for assessment of sapwood discoloration development was made in four birch roundwood stacks in the districts of Auce and Daugavpils. In order to evaluate the influence of harvesting type, side surface damages, placement in pile, storage duration, diameter, distance from the end plane, daily average temperatures, precipitation amount and relative humidity on development of sapwood discoloration, 616 discs from birch log end planes were prepared. After conducting multiple factor linear regression, it was concluded that a significant development of discoloration and its changes for birch roundwood are promoted by harvesting type, placement in pile, distance from the end plane, daily average temperatures and relative humidity (R2 = 0.450). For birch logs that are prepared by harvester with the daily average air temperature + 6 °C, the first signs of discoloration appear after 17 – 18 days, but on all logs stacked in pile they appear after 68 – 69 days. Whereas, with the daily average temperature of + 18 °C, the first signs of discoloration can occur after only six days, but on all logs stacked in pile they appear after 23 days.

Due to the ever increasing demand for energy resources, more and more attention is being paid to renewable energy resources. One such potential resource is lignocellulosic biomass that can be treated to acquire a carbohydrate rich substrate for further use in producing biofuels such as bioethanol or biobutanol. In this study, birch (Betula pendula) chips were used in fast pyrolysis to acquire bio-oil. This bio-oil was further hydrolyzed in pressurized reactor Parr 4554 to produce a carbohydrate rich feedstock. Hydrolysis conditions were optimized. Several conditions − three different temperatures (111, 121, 131 °C) and four different sulfuric acid concentrations (0.05, 0.1, 0.2, 0.5 M) were tested. The optimal conditions were 121 °C with 0.2 M sulfuric acid as a catalyst that allowed to acquire a solution with the total glucose concentration being 6.6% that can be further used as a feedstock for biofuel acquiring.