Icing notably increases the mass of a tree crown, causing damage to the tree. So far, a very limited number of studies have assessed the icing influence on coniferous trees, none of them in Latvia. The aim of the study was to assess the influence of tree parameters and recent thinning on the proportion of damaged trees and the type of damage in Scots pine stands. The study sites were located in the eastern part of Latvia, damaged in December 2012. In total, 98 pine dominated stands of different age were selected randomly. Eight (mean) plots per stand were established; in each plot, all trees larger than 2.1 cm were measured and the type of damage assessed. The above-ground biomass from 12 randomly selected stands (57 dominant trees) of different age was weighted with and without icing. The biomass of pine with icing exceeded that without 1.5 ± 0.27 times. The mean proportion of damaged trees in pine dominated stands was 26%; the proportion of broken trees peaked in the middle-aged stands (41 – 70 years old), but the largest proportion of pooled bent and uprooted trees was found in the young (11 – 20 years old) stands. The proportion of damaged dominant trees was affected by the slenderness coefficient – a higher proportion of such trees was found among more slender trees. The results suggest that the risk of icing damage could be reduced by silvicultural measures boosting individual tree stability.

Fast-growing hybrid aspen clones are recommended for establishment of plantation on abandoned agriculture land in Northern Europe. In this study we assessed the productivity, quality and assortment structure of hybrid aspen clones at final felling. Data were collected during the hybrid aspen clonal experiment conducted in the central part of Latvia. Large variation in the productivity level between different clones was affected by growth and survival. From the compared 5 most and least productive clones, based on the yield m**3 haE-1, the faster growing clones have about 17% better survival rate at age 10. Also, the mean annual increment (MAI) differed notably and significantly (p is less than 0.05, α = 0.05) between hybrid aspen clones at the age of 18 years ranging from 7 to 34 m**3 haE-1 yearE-1. Theoretical assortment structure of hybrid aspen at the age of 18 years was the following: 43 ± 4.86% of small dimension saw logs (SDS logs), 21 ± 4.86% high quality saw logs (HQS logs), 18 ± 4.33% pulpwood, 4 ± 0.77% firewood and 13 ± 0.08% of logging residues (tops). The outcome of HQS logs on average is more than 30% from the 5 best clones and further increase can be predicted with age. Stem volume (H2 = 0.32), height (H2 = 0.47) and quality parameters (stem straightness - H2 = 0.73, branch angle - H2 = 0.60) had a high heritability and large differences between clones, indicating notable possibilities to improve the productivity of plantations via selection of the best-growing genetic material.

Wood based ash can be used as a liming material and fertilizer in forest, thus providing a solution for utilization of wood ash and formation of additional increment of trees, especially on organic soils, where lack of potassium and phosphorus is a well-known factor limiting the growth of trees. Yet, many studies have been made with adverse results mostly because of different soil types and species investigated. However, by now the best results on fertilization with wood ash have been found on drained peatlands, where some nutrient deficiencies have emerged. The aim of this study was to find out the growth response of Norway spruce on drained organic soils after spreading of potassium sulphate (K2SO4) and wood ash (WA). The experiment was carried out in three middle aged Norway spruce (Picea abies) stands on drained mineral and peat soil. Experiment consisted of three replications of each treatment in each stand including WA, K2SO4 and the control on 400 square meter sub-sample plots each. The diameter and height of trees were measured. The samples of increment cores were collected 4 years after fertilization to determine the additional volume increment, which varied from 8.5 m**3 haE-1 in WA plots and from 9.7 m**3 ha-1 to 17.2 m**3 haE-1 on K2SO4 plots. Both - the wood ash and potassium application - significantly increased the increment of Norway spruce on drained mineral and peat soil, although no significant differences were found between the treatments (p = 0.82, α = 0.05).

Prolonged summer drought periods are forecasted for the Baltic Sea region during the 21st century, thus increasing the risk of drought stress of saplings used in forest regeneration. Nevertheless, the vitality of young stands might be increased by the selection of suitable planting material. The aim of this study was to estimate the effect of changes in distribution of summer precipitation on height increment, biomass distribution and root morphology of Scots pine and silver birch planting material commonly used in the forest regeneration in Latvia. Containerized pine and bare rooted birch saplings, planted in three different soil types, were subjected to altered distribution of summer precipitation, provided by the use of automated shelter. Sheltered saplings were weekly irrigated with the sum of precipitation of a corresponding period, while afield planted saplings had an unchanged precipitation regime and served as control. Height increment was measured once per week and estimation of morphology of saplings was done after the end of every vegetation season. Significant (p is less than 0.05) differences in height increment, and shoot and root biomass were observed among the same planting material in different irrigation regimes and soil types. In the control plots of peat soil, pine had a significantly (p is less than 0.05) larger height increment while birch-significantly (p is less than 0.05) smaller compared to experiment. Forecasted longer drought periods might reduce the growth of Scots pine in fertile forest types but silver birch growth might be affected in fertile mineral soils in future.

Recent studies have demonstrated the occurrence of different needle cast (Lophodermium spp.) species in young Scots pine Pinus sylvestris L. stands in different regions of Latvia. The impact of these fungi has been known also historically, but is predicted to increase in future due to climate changes that are forecasted to have a positive impact on presence and vigour of various species of fungi. The aim of the study was to characterize the needle cast damage in young Scots pine stands in central Latvia. Material was collected in 12 Scots pine stands at the age of 3 to 26 years in 28 plots with a total area of 8.1 ha in the middle of two consecutive growing seasons (years 2012 and 2013). The impact of disease was visually assessed using a 5 grade scale, depending on the proportion of damaged (brown) one-year old needles. Incidence of damaged trees (P, %) and damage intensity (R, %) was calculated and used to characterize the occurrence and severity of the infection in the stands as well as its link to other stand parameters. Damage incidence (ranging from 20 to 100%), as well as the intensity (from 4 to 35%) was slightly (incidence-also significantly) higher in 2013 in comparison to 2012; correlation between those two parameters was strong in both years (r = 0.94 and r = 0.84, respectively). The stand age, density (ranging from 1200 to 6900 trees haE-1) and tree height did not significantly correlate with the damage incidence or intensity. Forest type (Hylocomiosa or Myrtillosa mel.) was not a significant factor, too.

The aim of the study is to evaluate the impact of drainage on soil carbon stock in a transitional mire drained for forestry. The study site is located in the central part of Latvia representing hemiboreal vegetation zone. Site was drained in 1960. It is located in a catchment area of the river Veseta. An undrained site at the same catchment area was chosen for control (ca. 2.5 km between sites). In both sites, the depth of peat is 4 – 4.5 m. Drained site is dominated by coniferous trees. Soil samples collected in 2014 were used to determine bulk density and carbon content, and to calculate soil carbon stock. Samples were collected down to 80 cm depth. Ground surface elevation was measured before and several times after the drainage to determine peat subsidence. Carbon stock has increased by 0.3 tons haE-1 yr**1 after drainage, although peat has subsided on average by 26 cm (13 – 48 cm). Subsidence was mainly caused by physical shrinkage of peat not by organic matter oxidation. Drainage was followed by compaction of aerated soil layer, which has caused most of the subsidence, especially during the first years after drainage. Soil bulk density has increased almost twice at soil surface layer 0 – 10 cm (from 75 kg m**3 to 141 kg m**3). Differences decrease at deeper sampling depths. It is concluded that drainage is not always followed by reduction of carbon stock in soil. Increased above and below ground litter production rates may offset accelerated decomposition of organic matter after drainage.

Forest fires in Latvia occur every year. Research about vegetation and forest regeneration after forest fire is being carried out in Latvia, and sanitary conditions are being evaluated too; however, there are no large studies about the forest fire impact on radial growth dynamics of trees. The aim of the study was to analyse and compare the response reaction of a forest stand after fire in two forest site types – Hylocomiosa and Vacciniosa turf. mel. The object of the research was fire affected middle–aged managed Scots pine (Pinus sylvestris L.) stands in the aforementioned forest site types. The study compares radial growth dynamics of trees, tree mortality and forest stand sanitary conditions after fire in Hylocomiosa and Vacciniosa turf. mel. The observed fire impact on radial growth dynamics of trees was negative in both forest site types. Negative fire impact on sanitary conditions was observed, too.

The aim of this research was to study the effect of the stand composition on the density of pine and spruce wood growing on former arable lands. Sample areas are located in mixed mature pine- and spruce-prevailing stands in Leningrad region, Russia. For the reliable determination of the basic density of spruce and pine wood, selection of model trees was carried out and cores were taken. Based on the data obtained from stems of 36 model trees from 3 sample plots, conversion equations were calculated to determine the basic density of wood. The measurements of the spruce and pine wood density were processed using variational statistics. The results have shown that the pine forms a more homogeneous wood than the spruce. On former arable lands, spruce has a denser wood than pine under the same growth conditions. The stand composition has a significant effect on the density of spruce rather than pine.

The aim of the study is to determine how successful the initial growth of naturally grown and planted pines is after performing the shelterwood cutting. The research includes tree count and height analysis in Myrtillosa and Hylocomiosa forest types with different regeneration methods in 2018. A total of 10 sites were arranged for the research, each site having 4 sample plots. All naturally regenerated and planted pine (2009, 2012 and 2013) heights were measured. Judging by the number of trees after shelterwood cutting, most sites should not be considered regenerated, additional planting or scarification of soil is required which can improve the efficiency of natural regeneration. In all the sites both in Myrtillosa and Hylocomiosa, after shelterwood cutting it was observed that the height of artificially regenerated trees is higher than the height of naturally regenerated trees, indicating the ability of planted pines to produce more rapid height increment in the first years of life, regardless of forest type. The basal area of the stand has a significant negative impact on the increment, and it indicates the need for the subsequent shelterwood cut to be performed. Although Hylocomiosa is a more fertile forest type than Myrtillosa, the height of the planted pine trees in Myrtillosa is higher than in Hylocomiosa, where, after shelterwood cutting, no sufficiently intensive agro-technical tending has been performed.

The topicality of the study is determined by the increasing demand for sanitary felling services currently mainly provided by manual work. Harvesting using hand-held motor instruments is a physically hard work whose costs are increasing rapidly, but labour availability is declining. In sanitary cuttings, additional complications are caused by the use of conventional machinery in harvesting, which necessitates the creation of wide (4 m) technological corridors and significantly increases the proportion of damaged remaining trees in a stand (according to past studies, a set of middle-class forest machines in thinning of spruce stands results in 4–5% of damaged trees, but in pine stands – in approximately twice less damaged trees than in spruce stands). The compact class forest machines in thinnings result in mechanical damage to not more than 1% of remaining trees. During field trials in sanitary felling 9329 trees were felled. The average productivity, working in one shift, is 5.35 m**3 hE−1 with average stands 10 cm. The cost of harvester’s productive hour is 92 € but of a forwarder it is 78. The compact class forwarder creates significantly smaller impact on the soil by reducing ruts depth and soil compaction, which is especially important in sanitary fellings and extraction of seed trees in regenerated areas.