After a 16-m high dam was constructed and a 297-ha pond was arranged in the River Šušvė nearby Angiriai in 1980, the previous natural flow regime of the river has changed: 15500000 m3 of water accumulated above the dam is not discharged via a natural bed, but through two 1.5x1.5 m bottom orifices, and flood discharges (up to Q1% = 296 m3 sE-1) are directed into the lower reach through a 16-m high shaft spillway of floods. Such arrangement of the Angiriai dam ensured it to become an essential obstacle for migrating fish. In 2000, after the arrangement and operation of Angiriai hydro-electric power station, the water regime downstream the dam has been changed and new hydrological pulses as well as ecosystem biodiversity are to be adapted. Thus, the operation of Angiriai HPS on the River Šušvė generating hydroelectric power can have adverse effect on the river habitats and hydro ecological connectivity. To evaluate the effect, the eco-hydraulic water regime measurements in 2005 in a lower stretch with and without turbines operating were made. The study results showed that artificial water levels fluctuation (≈ 4 m hrE-1) induced by Angiriai hydro-electric power station as well as the discharge flowing through the bottom orifices due to high velocities (13–14 m sE-1) and temperature differences could create stressful situations for young fish in the lower bank. According to the data of soil texture of the Šušvė River, the bed armoring process is going on below the Angiriai HPS is quasistable and no impact of HPS operation is found.

This article gives a review of modern networking technologies and standards used in the development of distributed control systems. Study of related scientific and professional literature has been performed, and basing on it a multi-level model of digital network structure in the field of small-scale autonomous combined power systems has been proposed. Necessity of integration of autonomous powering into SmartHouse systems and related distributed computing and networking issues are reflected as well. As there is a wide variety of industrial networking standards used, this review covers and groups more frequently used protocols and stacks from the view of OSI (Open Systems Interconnection) reference model and layers of industrial automation. The aim of this article is to give a reference-point in the development of distributed control systems in the field of small-scale autonomous power supply and integration of them in SmartHouse systems.

Energy transition from the fossil fuel dominating to the one based on renewable energy sources (RES) takes acceleration with the internationally recognised need to stabilise the global warming. Therefore, there is a general consensus that the initiative of the wide use of RES is manifold in its nature making an impact not only on the environmental issues, but also adding to the so desired customer involvement and rural development as well. Rural dimension in reaching the EU targets should arguably be a priority as RES utilisation is decentralised in its nature. Despite the fact that EU with its main strategic documents gives a clear direction on RES utilisation through wider involvement of citizens, especially in rural places, there are certain grounds for stating that a current situation and future insights among EU Member States still differ. Lithuanian case was chosen to explore the sustainability gaps regarding the RES utilisation development in rural places. Literature review is employed to choose the most suitable way aiming to explore and evaluate the RES utilisation development in rural places regarding the sustainability issues. This article adds to understanding and evaluating the main obstacles of the well balanced RES utilisation development in rural places.

When the measurements of power consumed by cutting mechanism electromotor are made, the mechanical cutting power cannot be obtained, because they are different physical processes. However, determination of electricity power is relatively simpler. Therefore, both powers are determined in the study, in order to evaluate coherence between them. Computer numerical control machine was used for climb-sawing of aspen (Populus tremula L.) wood with a circular saw. Mechanical cutting power was calculated from measurements of cutting force, but the electric ones – from measurements of current and voltage. As a result, changes of both powers and of specific cutting work, on what the analytical calculation of cutting power is based, were obtained depending on length of the cutting trajectory. It is found out, that mechanical cutting power is greater than electric power, and it is useful to use for the analytical calculation, based on determination of the specific cutting work, wear coefficient of the cutter that depends not only on the duration of work of cutter, but also on feed speed and the length of the cutting trajectory.

The electricity consuming end-user profile has changed in latest years, due to development of new electrical devices with increased functionality and complexity. Also increasing number of electricity consuming equipment that is available to end-user, makes very hard to identify real electricity consumption of each device. The existing wall plug digital power meters are too expensive for long-term power metering of each consuming device. The article describes a different approach of power metering system that lowers the costs and price of needed metering equipment. A new concept of low-cost energy monitoring system with wireless communication is developed.

Europe’s future wood demand for energy is expected to increase by 10 million to 200 million m3 in the period 2010- 2030. This will be supplied by both domestic sources (forests, industrial residues post-consumer wood waste), but also from sources outside Europe. The EU-28 predicts a near future (2020) gap between solid biomass supply and demand for renewable energy: 21.4 million tonnes of oil equivalents (MTOE). This is estimated via preliminary renewable energy action plans (NREAP’s) per country. The EU-28 expects wood pellet import will merely complete this gap of 21.4 MTOE, with more than 50 million tonnes of pellets. This implies a feedstock need of 125 million m3 of wood from forests and other sources outside the EU-28. A practical approach to include bioenergy in wood sector models should start with the input of wood pellets. Ideally, three types of bioenergy markets should be considered, in which pellets and the other major woody feedstock are included: 1. Large scale power production (the UK, Belgium, the Netherlands, all importing pellets from outside the EU-28); 2. Medium scale combined heat and power (CHP’s) including those in the forest sector (Nordic countries use pellets and chips for energy, merely imported from the EU-28); 3. Small scale residential heating (Germany, Austria and Italy, using wood pellets and logs from regional sources). We suggest starting with inclusion of medium scale CHP’s, followed by large scale power production. Small scale heating is relatively stable and should not have large impacts on future markets.

The research paper discusses simulation of the loading process of the vertical axis wind turbine with the permanent magnet synchronous generator. Experimental and analytical studies were done in the year 2013. The research results show that electrical load on the wind turbine generator is important for the wind turbine performance. If the load is above or below the power gained from the wind energy, the turbine operation cannot be considered efficient and its dynamic parameters fail to achieve the efficiency level at the proper operation load when the load is built up strictly in accordance with the wind energy input. In the research, 3 separate virtual electrical loading models with static, discrete, dynamic electrical load were established. MATLAB SIMULINK simulated virtual model shows the importance of usage of the right amount of electrical load in the vertical axis wind turbine with the permanent magnet synchronous generator. Final research results showed that the most effective loading process of wind turbine generator is a dynamic load.

One can reasonably argue that issues related to the increased use of renewable energy resources in the energy production processes in Latvia, are at the forefront and will remain there in the future. This relates to the aspect that Latvia is not rich in non-renewable energy resources (around 70% of total primary energy consumption in Latvia is ensured by import, which can lead to undesired effects in many areas), but at the same time, there are available renewable energy resources in Latvia, with an untapped potential to be recognized. In particular this applies to fuel wood, which is already (year 2012) the most important domestic fuel in Latvia. In this context it is important to emphasize that, according to the particular study results, if unexpected socio-economic developments do not take place, raw wood material resources required for different types of fuel wood production in Latvia should be available in the same amount as it is now if not more. As for increasing the amount of fuel wood use in Latvia, an enormous ‘potential’ can be seen in general use boiler houses, where there are currently no technological limitations to utilize this ‘potential’. General use cogeneration plants can be recognized as an even greater ‘potential’ for greater use of fuel wood in Latvia, but given the circumstances of energy supply in Latvia, the ‘potential’ is currently available on a very limited basis. At the same time it is important to note that both of these ‘potentials’ could be significantly reduced in the next few years.

The plants emit different types of volatile organic compounds (Bio VOC’s) and can improve air quality: they effectively remove organic pollutions and reduce the number of microorganisms in the air by releasing phytoncides. The lack of negative ions in the air can cause deterioration of the health of humans breathing it. At the same time, an air saturated with negative ions can improve the state of health and provide a comfortable environment. In this article, the influence of the plants (Cupressus macrocarpa) on the number of ions is proved, based on a series of experiments performed with applying high-voltage pulses (air ionizer). This work is devoted to the elaboration of the mathematical relationship between the air ions concentration and the factors influencing it. For this purpose an experimental stand was made, consisting of two equal compartments: one contained the plants while another one was used as a control without plants. It was concluded that the plants, in general, are able to stabilize the ion concentration and to reduce its fluctuations. The plants help to increase the concentration of negative ions and to decrease the concentration of positive ones.

The aim of the article is to ascertain the interaction between weather conditions and electric energy consumption in the Latvia household. The electric energy consumption data in the Saurieši village, Riga region, Latvia, for the year 2012 were collected, and the climate data for the same period including the duration of the sun-shine, ambient air temperature, precipitation intensity, and wind speed were obtained. The research hypothesis that there is strong relation between weather conditions and electric energy consumption was proved partially – there is rather strong correlation between household electric energy consumption and air temperature (r = 0.91), and medium correlation between household electric energy consumption and precipitation (r = 0.61), as well as between household electric energy consumption and duration of the sunshine (r = 0.67). Correlation found between weather conditions and electric energy consumption in the household allows to forecast the trends in energy consumption based on weather measurements, and even to use the weather forecasts for electric energy future demand trends development. The equations developed explain the household energy consumption patterns in Latvia with its geographical location and economic conditions, but the methodology developed can be applied for any region if necessary data are available.