Latvia uses average moisture content and density indexes obtained in Russia and European countries; though, these indexes are different, and there is no information about the most suitable one for conditions in Latvia. Research complex on Latvia’s industrially important tree species - Scots pine (Pinus sylvestris L.) stemwood and bark moisture and density changes, depending on influencing factors, is being conducted at Forestry Faculty of Latvian University of Agriculture. The research results on Scots pine, obtained during the year 2011 in the whole territory of Latvia, are outlined in this article. Wood and bark moisture and density were analyzed in 21 sampling plots, arranged in middle aged and cutting-aged reached forest stands, depending on tree age, cutting time and location place in the tree stem. The average moisture content of pine wood mostly depends on heartwood specific weight and age of the tree. With an increase of tree age, average wood moisture content value decreases from 111% (40-year-old trees) to 77% (145-year-old trees). Scots pine heartwood moisture content changes a little during the year: 30– 34% for 71 to 146-year-old trees; and 34-41% for 37–70-year-old trees. Sapwood moisture content is changes from 113% (in the summer) to 130% (in the winter), without any reference to the age of the tree. The average density of oven dry timber obtained from 71–146-year-old trees in the research is 0.501 g cmE-3, whereas in freshly cut condition – 0.848 g cmE-3.

The objective of this study is to evaluate the performance of models developed by Repola (2006) to estimate the vertical changes of the basic density of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies [L.] Karst), and birch spp. (mainly Betula pendula Roth) stemwood in the forests of Latvia and to develop a model for the estimation of average knot-free stem density with bark (SD) using diameter at breast height as an independent variable. The study material comprised a total of 81 spruce, 102 pine, and 105 birch stems representing a wide range of tree growing conditions in Latvia and covering all age classes. The knot-free stemwood density (SWD) of pine and birch demonstrate strong vertical dependence along the stem, while for spruce the variation pattern was less pronounced and seemed to be nearly constant along the stem. The SWD estimated by Repola’s models was 4.3% lower for spruce, but 3.4% higher for pine and 2.2% for birch comparing to average values obtained in this study. Sigmoidal regression equations constructed in our study explained 67%, 27% and 54% of variations for predicting SD for pine, spruce and birch, respectively. Birch stemwood has a highest basic SWD – 470 kg mE-3, followed by pine – 397 kg mE-3 and spruce – 385 kg mE-3. According to our results, the birch bark turned to be denser than the birch stemwood, being vice versa for the studied coniferous species.