To promote the future of abandoned lands management and the reduction of fossil energy consumption in Latvia, the establishment of energy crops plantation facilities, including perennial grasses, was investigated. The objective – suitability of several perennial grasses for bio-energy production under condition of Latvia. The aim of the current research to evaluate the experimental field conditions for the cultivation of perennial grasses. The perennial grasses are modest in terms of soil conditions, they are environmentally friendly, as well as provide high yields of biomass with adequate quality for bio-energy production without large investments. With increasing amounts of bio-energy production the amounts of various by-products which are profitable to utilize as energy crops fertiliser will also increase. It is essential that plant nutrients return back into circulation by creating a complete cycle. In order to test in practice the possibility of creating this complete cycle of growing perennial grasses, an experimental field was chosen at the Research Institute of Agriculture in Skriveri. In the summer of 2011, before trials establishment, the conditions of soil were examined at four depths: 0 – 20 cm; 20 – 40 cm; 40 – 60 cm and 60 – 80 cm. The analyses showed that the experimental field conditions were appropriate for growing of perennial grasses. The results of the soil agrochemical analysis will be a base for future studies of usage efficiency of different fertiliser types on perennial grass productivity and nutrient recycling opportunities in energy crop plantations.

Sewage sludge is a specific bulky waste and its utilization is hampered by the presence of the environmentally dangerous contaminated substances in the composition presented mainly by heavy metals, pathogens and coagulants. At the same time sewage sludge may serve as a valuable biological raw material. Utilization of the sewage sludge is crucial environmental and economic challenge. Application of the pneumatic pulse method in the technology of dehydration and utilization of the sewage sludge may allow us to speed up the process of drying, reduce power consumption and capital investment, execute process of dehydration at lower temperatures and in less hazardous explosive conditions. Proposed solution is founded on the use of the compact equipment for dehydration and utilization, including pneumatic pulse drying method. For this purpose the pulser – an airflow feeder with required time intervals or pulses, was included in the technological process. In the process of the drying sewage sludge with the use of pneumatic pulse, there is no need to spend all the energy on evaporation of the water molecules and this fact significantly reduces power consumption. Preliminary calculations, taking into account laboratory data, showed that proposed technology of drying sewage sludge allows to reduce power consumption by 25% upon receipt of the dry sludge. The aim of the study is development of sewage sludge dehydration technology for further utilization of design solutions using the pulse method.

The report presents the assessment of emission of greenhouse gases (GHG) generated by the treatment, disposal and storage of sewage sludge in Latvia. The aim of the study was to determine GHG emissions from stored sludge because those were not previously estimated. The proposals for the further reduction of the GHG emissions are elaborated on the provided estimations of different treatment models. The calculations of GHG emissions are conducted by using acknowledged software and data from Latvian Environment, Geology and Meteorology Centre. Data from the year 2005 till 2009 about the amount of stored sludge were used by the authors for mathematical calculations in the year 2010. The long-term storage of sewage sludge and their disposal in landfills were detected as the main sources of GHG. It was detected that the average GHG reduction of 5 Gg per year can be ensured by using biological treatment of sewage sludge.

The most efficient way to dewater sewage sludge is the thermal drying, which simultaneously with the granulation allows obtaining the product in the form of granules, being a non-putrescible fertilizer that is also easy for transportation, storage and bringing into soil. When large volumes of sewage sludge are formed, which are unfit for use in agriculture, application of other utilization methods, such as burning, would be purposeful. The aim is to determine the optimum drying modes of sewage sludge with application of pneumatic pulse method at treatment facilities in the pilot project. To do this, it is necessary to develop a proposal for the design of operating model. The design and making of working model is necessary to determine the optimal conditions for sewage sludge drying at sewage disposal works. The drying process is provided to be realized in a closed-loop cycle (without emission into atmosphere). Due to inner recirculation of dry air, the installation heat consumption is reduced. Calculations have shown that there is economic expediency of using the pneumatic pulse method in sewage sludge thermal drying technology and possibility of using sewage sludge as an alternative fuel. Optimization of sewage sludge thermal drying process with the use of pneumatic pulse method will considerably extend the perspectives for utilization and further use of sewage sludge.

Utilization of the sewage sludge is pressing and crucial environmental and economic challenge. High moisture content of the sludge is one of the main difficulties during the process of the sewage sludge utilization. Experimental drying module has been designed and manufactured to identify and verify effectiveness of the main parameters of the thermal drying of the sewage sludge with application of the pneumatic pulse method. The pulser is supposed to be part of the technological scheme in order to speed up the process of drying and saving energy. The pulser supplies hot air into the drying chamber with time intervals by pulse. In the drying chamber the airflow dislodges water molecules from the material by means of pulses and then they are taken away from the drying chamber. For the convenience of the comparison and evaluation of the executed experiment the following general characteristics were selected: drying rate – i – kg minE-1; power consumption – q – kWh kgE-1. The greatest effect in application of the pneumatic pulse method for dehydration of the sewage sludge was achieved at the angle of incidence equal to nearly 90° of the airflow on the dried sample and higher temperature. The experiment showed that application of the pneumatic pulse method for dehydration of the sewage sludge allows to reduce power consumption and speed up the process of drying. The process of drying can be executed at lower temperatures.

Main factors raised interest about biomass as the source of energy increase renewable resource demand in the context of Green house gases emissions decrease and the problem of environmentally friendly and efficient waste utilization. Legislation of waste water sewage sludge use is becoming stricter now. After cutting away top peat layer of peat quarry, the owners have two alternatives: the first, to flood the fields and transform them into bogs, the second, to carry out some economic activities - one of which must be field afforestation with traditional or fast growing tree species. Before planting trees it is necessary to fertilize the fields, and waste water sewage sludge will be one of potential fertilizers. Aims of research were to determine the impact of waste water sewage sludge fertilization 10 t haE-1 on tree growth and soil properties. Concentration changes of N, P, K, and Ca, Mg in different depth and concentration of S and total C and heavy metal in soil top layer during the year 2006 were determined. The effect of fertilization on tree growth and stock was determined by the non-destructive method, data were calculated by height and root core diameter of trees. Fertilization stimulates tree growth as weed growth too. On peat areas observed soil acidity decreasing. Despite of sufficient amount of nutrients willows were not suitable for peat fields. To avoid increasing of heavy metals content in soils, only qualitative waste water sewage sludge or waste water sewage sludge composts is acceptable for fertilization.

The paper presents the results of investigations on wastewater formation and its treatment in constructed wetlands (CW) with horizontal flow. The investigations were carried out on a dairy farm in the period of 1995-2004. On farmsteads containing cattle sheds, the pollution of wastewater is 2-3 times higher compared with domestic wastewater. The largest amount of slowly decomposing organic pollutants is retained during wastewater filtration via a septic tank (62.7% according to CODCr). During wastewater filtration through a horizontal CW, the amount of retained organic pollutants biochemical oxygen demand (BOD5) and chemical oxygen demand (CODCr) is 93.6%. During wastewater filtration through CW, nutrients (Ntotal and Ptotal) treatment efficiency on the dairy farms, where Ntotal concentration is 101.0 mg lE-1, is one the average 61.4% of nutrient load, and 41.4% of P where Ptotal concentration is 21.5 mg lE-1. The analyzed wastewater treatment facilities (septic tank + CW) are distinct for their buffering capabilities. They are affective enough, however due to limited P removal processes in sustainable natural environment, additional P-removal means are to be used in wastewater treatment facilities arranged on dairy farms.

The processing of milk in dairy companies produces a certain amount of wastewater and liquid wastes. During the treatment process of such wastes sludge is accumulated in treatment facilities. The sludge is a rather valuable soil fertilizer; however, apart from plant available nutrients, it also contains large amounts of pollutants. The paper analyzes the quality of wastewater treatment process performed in treatment facilities of dairy companies, and specifies the amounts of plant available nutrients contained in sludge accumulated during the treatment process of wastewater and liquid wastes. The amounts of heavy metals contained in sludge are compared with their maximum allowable concentrations determined in the environmental requirements for soil fertilization (Aplinkosaugos reikalavimai..., 2001). On the basis of the study results and normative documents of environment protection, the article presents optimal rates and regime for sludge fertilization as well as analyzes the agro-technical and qualitative characteristics of sludge spreaders made at the Water management Institute of Lithuanian University of Agriculture and used during the technological process of fertilization.

The paper presents the analysis of the pollution of water and sludge of the pond situated in the park of Kedainiai town. The analysis of pollutants such as heavy metals and oil-products has been carried out with the aim to evaluate the possibilities of arranging a sanitary safe bathing, place in the park and use the accumulated sludge. It was determined that the content of heavy metals in sludge exceeds the maximum permissible limit for sludge pollution in Lithuania. According to cadmium amount, the pollution also exceeds maximum allowable soil pollution level. However, the sludge in the pond contains a rather large amount of oil-products. After carrying out stirring-up tests of bottom sludge, it was determined that turbid water is polluted with oil-products that exceed the maximum permissible limit.

The transformation from a linear to a circular economy model is a political priority of the European Union to develop sustainable and more efficient raw materials and waste management. The wastewater sector is an important element in the circular economy with a great potential for resource recovery such as phosphorus recovery from waste streams. With this in view, the present study’s aim was to analyse data on municipal wastewater treatment plants (>2,000 p.e.) in Latvia and the present situation with newly developed circularity indicators on waste reduction, pollutants removal, resource recovery and water reuse; thus, enabling evaluation of the level of transformation towards circularity in Latvia’s wastewater treatment plants and their future perspectives. The results showed that the wastewater sector in the country complies with legal obligations, but on the other hand, only a few solutions are practised in compliance with the principles of circular economy, i.e., reduction of wastewater discharge and increasing sewage sludge utilization as fertilizer in agriculture.