Importance of the study is determined by increasing consumption of woody biomass as a renewable energy source. Whole-tree harvesting is commonly applied for bioenergy use, however intensified biomass removal from forests can cause significant nutrient loss in soil. Nutrients can be returned to forest ecosystem by fertilizing soil with wood ash, which is generated as a by-product of combustion in wood-burning power plants and heating plants. Studies on ash spreading technological processes and costs so far have been insufficient. Aim of the study is to compare the productivity and prime cost of ash spreading with modular spreading trailer and Amazone mineral fertilizer spreader. According to study results productivity of modular trailer is 0.57 ha hE-1 and the spreading costs are 88 EUR haE-1, but that of mineral fertilizer spreader Amazone – 0.61 ha hE-1 and 41 EUR haE-1, respectively. Despite lower productivity modular trailer is more suitable for spreading wood ash, because a larger amount can be delivered and ash is applied more evenly. Productivity of modular trailer can be increased by technical improvements, like equipping the tractor with a crane and a small excavator bucket. Comparing costs of ash spreading and deposition, additional 8.72 EUR haE-1 were required, when using modular trailer, whereas, when using mineral fertilizer spreader, 77.52 EUR haE-1 can be saved. The main reason for the difference is smaller dosage when using modular spreader and additional loading costs.

The biological control agent Rotstop, composed of spores of Phlebiopsis gigantea, is used for treatment of conifer stumps to reduce the spread of Heterobasidion root rot in commercial forests. Two experiments were conducted to compare the antagonistic ability of the Rotstop isolate and nine Latvian isolates of P. gigantea against root rot fungus Heterobasidion, in wood of Scots pine and Norway spruce. Billets of conifer trees were first sprayed with a spore suspension of P. gigantea and then with Heterobasidion at different concentrations. The presence of fungi in billets was evaluated by morphological characteristics of mycelium. The Latvian isolates of P. gigantea showed similar or even higher values of efficacy against Heterobasidion (average efficacy 84% in spruce and 89% in pine) than the commercially manufactured Finnish preparation Rotstop (61% in spruce and 90% in pine). Latvian isolates of P. gigantea have a potential to be used for preparation of biological control agents in the future.

European beech (Fagus sylvatica L.) timber value is high in southern Europe due to a great demand from Asia. Since the timber market is global, over a long time we can expect gradual increase in demand also in other countries, including Latvia, where climatic conditions becomes increasingly more suitable for this species due to ongoing climatic changes. In order to develop recommendation for the use of beech in our country, the aim of the study was to assess the potential financial gain from Fagus sylvatica stands in Latvia. Assortment structure, defined by topdiameter and length, as well as their prices was set based on the literature survey. Results showed higher income from older (115 years) than form younger (58 years) stands: 9108 EUR haE-1, and 7939 EUR haE-1, respectively. However, the opposite was true for the net present value (r = 3%): 1423 EUR haE-1 and 304 EUR haE-1, respectively.

The aim of this study is to improve the practice of mechanical forest site preparation (FSP) by identifying typical characteristics of FSP, including the direction of FSP machinery, manoeuvre count depending on configuration of parcel and forest type and width of manoeuvre track; to evaluate the productivity depending on different forest growing conditions; to create schemes of technological corridors for commercial thinning; to improve scheme of FSP according to the scheme of technical corridors for commercial thinning and to evaluate changes in the count of manoeuvres and total distance travelled. In this study, we have developed methods to evaluate the quality of FSP. Methods used in this study include GIS analysis of vector data from FSP machinery tracking devices and LiDAR (Light detecting and ranging) data analysis for terrain information. Study shows that there is a significant difference in productivity when the machinery of FSP is driving in different angles to the longitudinal axis of parcel. Reduced productivity is justified by prioritizing topography of the forest floor. Slope is a decisive factor in the ground water movement and should be considered in FSP planning. Study shows that the developed method could be implemented in practice of forest management in 41% of sampled forest stands.

Surface water runoff, formed in the company areas due to changing wastewater discharge and pollution fluctuations can be treated in retention ponds. Pollutants, released into the ponds, mineralize during complex natural biochemical processes in the aquatic environment. The paper presents the long-term observation data (2004 – 2016 m.) on the purification of surface wastewater, formed in the company’s production territory, in retention ponds. The aim of this work is to identify surface wastewater purification efficiency in retention ponds. Wastewater samples were taken before and after biological treatment. The samples were investigated in the Chemical Analysis Laboratory of the Water Research Institute of Lithuania University of Agriculture. Biochemical oxygen demand (BOD7 ) was determined with titrometric method, suspended solids (SS) – with gravimetric method, having filtered the substance through a mid-thickness filter. Concentrations of oil pollutants were determined with the help of a spectrophotometric device of infrared rays IKAN-1 in the Analytical Department of Agrochemical Study Center of Lithuanian Agricultural Institute. Although the suspended solids, BOD7, and oil hydrocarbon concentrations, released into the natural environment, were below the MAC when they are collected from the company’s production areas, they are often contaminated; therefore, it is necessary to treat them. The purification efficiency of researched materials was satisfactory and reached 61, 64 and 91%.

In this study, a conceptual rainfall-runoff METQ model, version METQ2007BDOPT, to simulate daily runoff was applied. The model structure and parameters were fundamentally the same as in the METQ98 model with some additional improvement and semi-automatical calibration performance. The model has proved to be successful for both small (the Vienziemite Brook, 5.92 km2 ) and large (the Daugava River, 81 000 km2 ) drainage basins. The model METQ2007BDOPT was calibrated to the six different size river basins (the Pērse, the Malta, the Neriņa, the Imula, the Malmuta and the Iecava). These pilot river basins are characterised by one or two prevailing natural conditions such as hilly agricultural lands, agricultural lowlands, sandy lowlands, forested areas, swamps or lakes. The results of calibration showed good coincidence between the measured and simulated daily discharges. The Nash – Sutcliffe model efficiency coefficient NSE varies from 0.52 to 0.78 and Pearson correlation coefficient r from 0.65 to 0.88 for the six river basins with calibration and validation period from 1956 to 2015. In this study, we found some relationships between the model parameter values and physiographic sub-catchment characteristics.

Lake sediments have a broad range of elementary and organic substance content. Bottom sediments collect decaying organic debris of aquatic plants and animals mixed by water drift with mineral constituents - deposited in the bottom of the lake in anoxic conditions. Lake Alūksne is situated in Northeast Latvia and is of glacial origin. Its water and bottom sediments chemical content depends on formation conditions – influenced also by anthropogenic activities. In order to determine environmental quality for restoration purposes and sediment recovery, geochemical research is needed. This paper aims to study bottom sediments – texture, ash part, organic compounds and metals to pinpoint necessary steps that are crucial for distinguishing environmental quality of the lake through geochemistry research. Bottom sediments contain sapropel with large admixture of organic compounds and microelements that may significantly influence biota and human health if concentration exceeds natural background levels. When bottom sediments are recovered, it may improve oxygene conditions in the lake, extracted sapropel can be used as a fertilizer, therapeutic agents, supplements for farm foods. Generally, sapropel is improving the structure of agricultural soils, increasing the cation exchange capacity and serving as binding material for complexes formation; thus diminishing ecotoxicological exposure threats of heavy metals, increasing yields and albumen and protein quantity in plants cultivation products. As these sediments can be used for soil fertilizing and crop production improvement in agriculture, mechanisms of ecotoxicological impact to various soil types and agricultural plant ecology should be researched.

A pilot-scale horizontal subsurface flow constructed wetland was installed at the farm Mezaciruli, Zalenieki County, Jelgava region, in the middle part of Latvia, in August 2014 to improve stormwater quality collected from the farmyard and demonstrate applicability of constructed wetland as a convenient treatment option for contaminated surface runoff. The examined water treatment system consists of a sedimentation pond as a pretreatment plant, a water pump, a water distribution well, and a horizontal subsurface flow constructed wetland with the surface area of 160 m2 . During the observation period of 27 months (2014 – 2016) water quality parameters such as total suspended solids (TSS), nitrate nitrogen (NO3 -N), ammonium nitrogen (NH4 -N), total nitrogen (TN), orthophosphate phosphorus (PO4 -P), and total phosphorus (TP) were monitored and nutrient removal efficiency of the system was examined. Water samples collected at the inlet and outlet were compared. Monitoring results obtained during this study show that on average concentrations of TN and TP were reduced by 22% and 80%, respectively. However, nitrate - nitrogen concentrations on average increased by 10%, as during the time period from June, 2015 to March, 2016 reduction in NO3 -N concentrations was not observed.

The plants emit different types of volatile organic compounds (Bio VOC’s) and can improve air quality: they effectively remove organic pollutions and reduce the number of microorganisms in the air by releasing phytoncides. The lack of negative ions in the air can cause deterioration of the health of humans breathing it. At the same time, an air saturated with negative ions can improve the state of health and provide a comfortable environment. In this article, the influence of the plants (Cupressus macrocarpa) on the number of ions is proved, based on a series of experiments performed with applying high-voltage pulses (air ionizer). This work is devoted to the elaboration of the mathematical relationship between the air ions concentration and the factors influencing it. For this purpose an experimental stand was made, consisting of two equal compartments: one contained the plants while another one was used as a control without plants. It was concluded that the plants, in general, are able to stabilize the ion concentration and to reduce its fluctuations. The plants help to increase the concentration of negative ions and to decrease the concentration of positive ones.

The growing economy with following industrialization and urbanization has led to environmental contamination with trace elements worldwide. In urban environment, the large inputs of anthropogenic contaminants in atmosphere are arising from mobile and stationary sources. The snow sample analysis is one of methods to monitor air contamination with heavy metals in urban areas. The aim of this research is to analyse heavy metal contamination and distribution in urban environment of Jelgava city. The samples were collected twice in January and February. Snow samples were collected in 20 urban area sampling plots and one natural area sampling plot with three repetitions taken from 1.0 to 1.5 kg of snow. The concentration of trace elements was estimated in 126 melted and filtrated snow water using inductively coupled plasma spectrometer (ICP-OES). The average heavy metals and nutrients concentrations were calculated for each sample. The concentrations data of trace elements were analysed using agglomerative hierarchical clustering method. The results show differences between results in January and February. The differences are related to anthropogenic impact intensity differences during the exposition periods of snow. The clustering results of snow samples taken in January show three clusters, but snow samples taken in February show four clusters.