This paper investigates the factors associated with private sector smallholder livestock and the associated income of the poor in the Indian States of Andhra Pradesh. The data used are drawn from the Livelihood Options Study led by the Overseas Development Institute, London, specifically the Census Survey 2001/2 and Panel Survey of early 2005. Poorer households depend disproportionally on livestock. Important changes were noted; the average size of any single species declined considerably in the five year period beginning from 1996/7, the number of farms keeping the species rose in the 1996/7 to 2001/2 period but dropped in the recent 2001/2 to 2003/4 period. The poorer households kept fewer small ruminants and poultry in the latter period but richer households kept more. This might suggest that the technology is shifting towards what the better off can afford like the intensive poultry keeping, and that they have better access to certain resources such as crop residues. On the other hand, policies such as the ban on grazing by goats will also have affected the poor more since they rely on open-grazing methods. Farmers identified shock/stress variables and natural environment as important for the decrease in livestock population. Livestock act as a very real means of smoothing income by allowing debts to be repaid, farm inputs and medical treatment to be purchased, and dowry to be paid. More than 22% of the farmers mentioned disease problems as a cause of the decline in livestock population. This problem needs to be addressed, possibly through public-private partnership arrangements as are being tried in other countries.

A set of pre-formulated hypotheses about the potentials of inland valleys to agricultural production in general, and livestock (dairy) - based enterprises in particular, were tested with data collected from five regions comprising 71 villages/towns and 630 households in three countries (Nigeria, Mali and Côte d'Ivoire). The study was undertaken to test hypothesis concerning the potentials of the inland valleys systems to agricultural production, and those pertaining to the intensification of livestock production in the valleys systems and their relationships with demand for livestock (dairy) products. Results from the analysis showed that many of the previously held views about inland valley and their potential were supported by the data from the three countries. Most of the hypotheses relating directly with inland valley potentials were accepted in the majority of locations. However, there were few hypotheses which were not supported by data from all countries and study sites. The overall assessment from the surveys is that the potentials of the inland valleys towards dairy production are currently good in all the countries and could be better if the resources available in the inland valley environments (for example crop residues) are better managed and utilized. Intensive use of inland valleys was related more to population density than access to market. Similarly consumption levels of domestic dairy products were influenced by population concentration. Instead access to market influenced positively farmers' practices towards specialization and intensification of dairy production. Increase demand for milk and dairy products is met by intensification and not by increase in herd size. Efforts to ensure continued milking through feeding was not related to herd size. As revenues (sales and home consumption) increased, more lands were left to fallow. These results confirm the assertion that the presence of inland valley systems for cropping and livestock rearing promotes diversification of agriculture, and presumably reduces farmers' production risks.

Four butter-making methods (3 traditional: clay pot - CP, 'mesbekia' - M - a wooden agitator with three to five finger like projections at one end, and a combination of the two - CP+M; and one improved internal wooden agitator fitted to the traditional clay pot - IWA) were evaluated for their efficiencies in terms of fat recovery and churning time at 12 smallholder milk producers in the central highlands of Ethiopia. About 21 litres of milk was needed to produce one kg of butter (83% total solids - TS). An average churning time of 222 min was recorded for the three traditional methods with a mean fat recovery of about 90%. Churning time was significantly reduced by 65% for the IWA as compared to the average of the 3 traditional methods. The effect of holding Ayib (Ethiopian cottage cheese) in whey for different time length (1 h, 2 h and overnight) on Ayib yield was compared. The mean Ayib-making time and temperature was respectively 48 min and 57°C. Weight of Ayib recovered significantly increased with increasing length of time Ayib stayed in whey before separation, amounting to 1266, 1475 and 1776 g per 9.2 litres of buttermilk for 1 h, 2 h and overnight, respectively. About 6 litres of buttermilk was needed to produce one kg of Ayib (20.4% TS). Besides, aerobic mesophylic bacterial count (AMC), counts of enterobacteria, and coliform bacterial count (CC) were performed. Average AMC, counts of enterobacteria and CC of butter samples were 8, 5.3 and 3.8 log cfu/g, respectively, while the counts for Ayib samples were 7.9, 5.1 and 4.4 log cfu/g, respectively. Enterobacter, Escherichia, Klebsiella and Klyuvera were the genera identified, while Enterobacter cloacae, Escherichia coli, Klebsiella oxytoca, Klebsiella pneumoniae and Klebsiella gr. 47 are the species commonly isolated from both products. The knowledge on traditional butter- and Ayib-making efficiencies and their microbial properties is essential to increase yield and improve quality and preservation of the products. (Résumé d'auteur)

A study was conducted to determine efficiency of an organic acids and phytogenic additives on pigs' growth processes and digestive tract microflora. The feed of the control group (C) did not contain the additives. The feed of the organic acid group (A) contained 6 kg of organic acids additive per tonne feed for pigs after weaning, 4 kg per tonne feed for grower pigs, and 3 kg per tonne feed for finished pigs. The feed of the phytogenic additive group (F) contained 0.5% of phytogenic additive per tonne feed for pigs after weaning, and 0.2% per tonne feed for grower and finished pigs. The feed of organic acids plus phytogenic additives group (A+F) contained 6 kg of organic acids additive per tonne feed for pigs after weaning, 4 kg per tonne feed for grower pigs, and 3 kg per tonne feed for finished pigs 0.5% of phytogenic additive per tonne feed for pigs after weaning, and 0.2% per tonne feed for grower and finished pigs. Compared to groups pigs from the group (F) had by 9.7%, group (A+F) - by 8.3 % and from group (A) had by 3.2% higher mass. The bests results of feed conversion were found in the group (A+F) - 2.84 kg, which was by 8.5% less than in the group (C), whereas the group (F) had by 5.1% and group (A) - by 6.7% better results than the control group. The results of Duodenum and Rectum microflora analyses showed that use of organic acid and phytogenic additives reduced mould yeast Staphylococcus sp. colony formed units (CFU gE-1).

The effect of selenium on the content of thiamine (vitamin B1), riboflavin (vitamin B2), as well as pantothenic acid (vitamin B5) in wheat (Triticum aestivum L), hull-less barley (Hordeum vulgare L.) and hull-less oats (Avena sativa L.) grains during germination were investigated. The winter wheat grain variety 'Zentos', hull-less barley and hull-less oats were used for study. Grains were soaked for 120 hours totally in solutions containing selenium from 10 to 200 mg lE-1 in the form of sodium selenate (Se+6). Grains with moisture content of 43%-44% were let to sprout at ambient temperature of 18+-2 deg C. The content of B1, B2 and B5 vitamins in germinated grains were determined using standard methods. Laboratory studies showed that changes in vitamin B1, B2 and B5 content depend on selenium concentration and kind of grains. Selenium additives promote biochemical activity of vitamin B1 and content of this vitamin decreases after 5 days' germination in all investigated grains at all applied selenium concentrations. Selenium concentrations of 10 and 25 mg lE-1 promote forming of vitamin B2 in wheat, barley and oat grains. The changes in vitamin B5 content depend on selenium concentration and kind of grains.

Vegetable oils are essential providers of energy to a human body; they play important role as a foodstuff. During processing and storage of vegetable oils, they may undergo molecular changes adverse to the human organism affecting the quality of the oils. The content of fatty acids of fresh rapeseed, linseed and hemp oils and of the mixture of rapeseed (800 g kgE-1) and linseed (200 g kgE-1) oils was determined by the method of gas chromatography (GH). Alpha - , delta - and gamma - tocopherols were analyzed in the vegetable oils by the methods of the highly effective liquid chromatography (HPLC). The hemp oils contain the indispensable polyunsaturated fat acids: linoleic acid - 53.0%, and linolenic acid - 23.2%. Such proportion of the fatty acids (3:1) is considered optimal in the nutrition. When using both hot and cold pressure technology for the obtaining of oil, it is possible that the polycyclical aromatic hydrocarbon - Benzo[a]pyrene - may be created and influenced the quality of the oil. The environment also affects the content of the lead in the oils. The density of the various vegetable oils at the temperature of 20 +- deg C proved to be within the limits of 0.917 and 0.942 kg dmE-3.

In order not to decrease the significance of a forest in the environmental maintenance and its role in the national economy, Latvian Forest policy needs to ensure that the existing forest areas are not decreasing, establish forest land transformation restrictions, thus, maintaining a long lasting development of forests. The preconditions for the change of the forest land use is one of the instruments for the state policy realisation, with the help of which a long-term development of forests can be ensured. At the moment working out the land policy in Latvia on a country level is being started. The publication is in the context of setting strategic targets for forestry and human resource development planning strategy, within the framework of Latvian forest and related department national programme. Due to the reasons mentioned, the topic discussed in the article is a problem of the day, and the research in this direction has got both theoretical and practical significance. The author investigate the forest land transformation process, by analysing normative acts and political documents in the article, as well as by summarising statistical data about the relevant processes in Latvia and in the world, during last six years. The issues, related to the forest land transformation process have been covered in the article; it has been analysed whether there are cases when a necessity arises to review the existing normative regulations. The answers have been given how to eliminate identified shortcomings, contradictions or problems.

The task of this paper is to create a simulation model of wood resource flow, enabling analysis of the flow of resources to the customer. The model consists of four modelling steps - the study of the system, the creation of conceptual and logical model, as well as data analysis. The model has been developed in UML (Unified Modelling Language) diagrams and the simulation model has been created using software EXTEND Industry. For the simulation of the model the scenario has been created. Based on this scenario, extended scenarios have been developed. Model of basic simulation represents the loading of resources into the transport, transportation, discharging from the transport and the return to the loading point. Using this basic scenario, the extended scenario has been created. This scenario analyzes the flow of wood resources to the customer, taking into account two criterions restricting the flows - assortment to be processed and the distance from the loading place to the customer's location. Extended scenario allows to analyze the load of each sector, as well as to follow each unit existent in the process of simulation. There are attributes of information (type, assortment etc.) added to the unit equivalent to 1m**3 of wood resources. These attributes can provide information about the unit flow within any part of the process.

Area of grey alder stands is 190.6 thousand ha that is 6.8% of the total area of forests in Latvia with average volume 31.3 million m**3 4.9% of total yield is in the state forests, but 95.1% in the forests of other managers. Scientific literature affirms that grey alder is easy growing trees species. Its stands are quick - growing and wood has high heating capacity. Empirical data in 1 - 10 years old stands are collected from 25 m2 sample plots, 15 in each stand. Data from older (11 - 30 years) stands are obtained by 6 - trees - sample - plot method, from 180 trees in each stand. Number of trees (y) in the stands diminishes with age (x) that is characterized by regression equation y = 72534xE-1.1488. The division of the number of trees in diameter classes characterizes distribution of trees diameters in stands and trees differentiation processes within the stands. At the age of 1 - 5 years, grey alder stems were in diameter classes under 2 cm but at the age 6 - 10 years - 2 and 4 cm. In 11 - 15 years old stands 89% of all the measured trees are included in four (4 - 10 cm) diameter classes. It pointed to growing differentiation of diameters of the trees. Starting from age 16 - 20 years, 76 - 89% of the trees were of four to five diameter classes (10 - 18 cm). The average standing volume in 11 and 15 year old stands was 110 m3 haE-1 and it increased step by step to 180 m3 haE-1 in the stands of age 26 - 30 years. The basal area in the age of 15 - 30 years varied between 20 - 26 m2 haE-1. The average diameter reached 15 cm in stands of 25 -30 years.