This study was carried out in the greenhouses of Bursa Uludag University Yenişehir Ibrahim Orhan Vocational School in 2014-2015 to determine the effects of five different irrigation levels (T1: 100% (full irrigation), T2: 75%, T3: 50%, T4: 25%, T5: 0% (non-irrigated)) and two different fertilization levels (F1.0: 100% (100:100:100 NPK) fertigation and F0.5: 50% (50:50:50 NPK) fertigation on yield and quality parameters of okra grown under unheated greenhouse conditions. In 2014 and 2015, the amount of irrigation water in the study was applied as 0.0-380.0 mm and 0.0-360.0 mm for the 100% (100:100:100 NPK) fertilization and 50% (50:50:50 NPK) fertilization treatments, respectively. Evapotranspiration values were realized as 200.0-410.0 mm and 130.0-400.0 mm for 100% (100:100:100 NPK) and 50% (50:50:50 NPK) fertilization treatments in 2014, 185.0-425.0 mm and 200.0-450.0 mm in 2015, respectively. It was observed that irrigation water levels significantly affected the yield, fruit diameter, fruit length, 10 fruit weight, and number of fruits per plant and dry matter of okra. The highest yield averages for both years were obtained from T1F1.0 and T1F0.5 treatments were found to be 14.6-17.8 tons’ ha-1 and 16.8 -15.7 tons’ ha-1 in 2014 and 2015, respectively. Crop response factors (ky) of okra were found as 1.38-1.26 and 1.26-1.41 for 100% (100:100:100 NPK) fertilization and 50% (50:50:50 NPK) fertilization treatments in 2014 and 2015, respectively. The highest water use efficiency (WUE) and irrigation water use efficiency (IWUE) values were calculated as 0.036-0.038 kg m-3 and 0.045-0.049 kg m-3 from T1F1.0 and T1F0.5 treatments in 2014 and 0.040-0.047 kg m-3 and 0.035-0.046 kg m-3 from same treatments (T1F1.0 and T1F0.5) in 2015, respectively. The highest T1F1.0 and T1F0.5 values were the closest values were obtained from T2F1.0 and T2F0.5 treatments therefore T2F1.0 and T2F0.5 treatments can be recommended for okra.

Kohlrabi, which has increased production in our country in recent years, is a vegetable with high water consumption. The aim of this study was to determine the effects of different irrigation levels on plant and tuber growth and determine the appropriate irrigation level. In this study, vegetative growth and some tuber quality parameters of two different kohlrabi cultivars (Korist F1, Kolibri F1) at 4 different irrigation levels (I100 I75, I50, I25) were investigated. The experiment was carried out in unheated greenhouse as a pot experiment in April-June with three replicates and 10 plants per replicate. At the end of the experiment; number of leaves, leaf width (mm), leaf length (mm), tuber diameter (cm), tuber height (cm), tuber weight (g), tuber pH, total soluble solid content of the tuber and chlorophyll index were measured. The growth curves of the tubers were drawn and potassium (K), phosphorus (P) and sodium (Na) contents of the tubers were determined. In Kolibri F1, the highest tuber weight was obtained from the I75 irrigated plants with an average of 369.59 g. In Korist F1, the highest tuber weight was obtained from I100 applied plants with an average of 362.25 g. Especially in terms of tuber development, I100 has provided better results in water deficiency application. However, according to the results of the analysis, there was no statistically significant difference between I100 and I75 irrigation levels. It was determined that I75 irrigation level could be applied for kohlrabi cultivars in April-June cultivation period in Antalya conditions.

Resources efficiency in production is essential to support sustainable production. “X” Bakery is one of the bread small and medium enterprises (SMEs) in Batu, East Java Indonesia. This study aimed to evaluate the implementation of Good Manufacturing Practices (GMP) and Sanitation Standard Operating Procedure (SSOP) in bread processing of SMEs production. This research used observation methods, interviews, and questionnaires. Respondents in this research are supervisors and employees of “X” Bakery. The results of this study indicated that the GMP implementation achieved 58.3% and SSOP of 52.3%, implying this industry had been standing under a minimum of 60%. This industry had poor qualified of GMP and SSOP. Five aspects of GMP have be fulfilled, namely the location and environment, production equipment, process control, food labelling, and product recall. Although, nine elements that have not met, namely buildings and facilities, water supply, sanitation facilities and activities, pest control, employee health, storage, supervision by the responsible person, employee documentation, and training. Furthermore, three aspects of SSOP have met, namely the prevention of cross-contamination, food protection, and labelling. There are five elements have not fulfilled SSOP criterias, namely the security of water, surface hygiene, sanitation facilities, and employee health control and pest prevention. The weakest indicator for each GMP and SSOP implementation are supervision and employee's health control respectively. Therefore, it was necessary to increase the employee's knowledge, the addition of supporting facilities, and production supervision to improve the implementation of GMP, SSOP, and sustainable production.

Sütün yağ globül boyutu, süt ürünlerinin kalitesini özellikle duyusal ve reolojik özelliklerini önemli ölçüde etkilemektedir. Bu sebeple pek çok süt ürününün üretiminde yağ globüllerini küçültmek amacıyla homojenizasyon işlemi uygulanmaktadır. Bu çalışmada, 4 farklı güçte (90W, 180W, 300W ve 400W) 15 dakika süreyle süte uygulanan ultrasonik homojenizasyon işleminin 150 bar basınçta tek kademeli klasik homojenizasyona ve 150/50 bar basınçta çift kademeli klasik homojenizasyona kıyasla yağ globül boyutuna ve homojenizasyon etkinliği üzerine etkisi incelenmiştir. Farklı metotlarla homojenize edilen süt örneklerinin homojenizasyon etkinlik değeri % olarak, lazer kırınımı prensibiyle çalışan cihazlarla Dv 0,99, Dv 0,90, Dv 0,50 hacimsel çap değerleri mikrometre (µm) olarak ve süt yağ globül boyutları nanometre (nm) olarak belirlenmiştir. Ayrıca tüm süt örneklerinde yağ globüllerinin mikroskobik görüntülenmesi gerçekleştirilmiştir. Ultrason işleminin hem tek kademe hem de çift kademe klasik homojenizasyon işlemine göre süt yağ globül çaplarını küçültmede daha etkili olduğu belirlenmiştir. Uygulanan ultrason işleminin gücü arttıkça süt yağ globül çaplarını küçültme etkinliği de artmış ve yağ globül boyutundaki en fazla küçülme 400W 15 dakika ultrason uygulamasında saptanmıştır.

Tarafımızdan yürütülen çalışmalarda in vitro kültürlerde mezankimal kök hücreleri ve endotelyal hücre hatları kullanılarak suyun IC50 değeri tespit edilerek hücreler üzerindeki pozitif ve negatif etki dozları belirlenmektedir. Buradan elde edilen sonuçlara bağlı olarak, gerekli olması durumda tüm organizmadaki etkileri deney hayvanları üzerinde in vivo olarak incelenebilmektedir. Bu amaçla genç wistar sıçanları deney gruplarına (deney ve kontrol) ayrılarak, su ihtiyaçları 3 ila 6 ay süre ile çalışma alanından temin edilen su örnekleri ile karşılanmaktadır. Belirli zaman noktalarında her bir gruptaki deneklerden kan ve idrar numunesi alınarak rutin biyokimya analizleri ile hemogramı analizlenerek değişimler kaydedilmektedir. Ayrıca aylık periyotlarla örneklemdeki denekler sakrifiye edilerek endojen dokuların genel muayenesi yapılarak histolojik ve kimyasal analizler için karaciğer, böbrek ve kalp dokusundan örnekler alınmaktadır. Doku örneklerinin bir kısmı mikrodalga kullanılarak homojenizat haline getirilir ve element içeriğindeki değişimler ICP_OES ile tayin edilmektedir. Diğer kısmı ise %10’luk formaldehitte tespit edildikten sonra dondurarak kesit alma yöntemine göre 5 um’lik ince kesitleri alınarak histopatalojik olarak incelenmektedir. Bu çalışmalar göstermişti ki su analizlerinde kullanılan bilindik yöntemler çok kıymetli olsa da sitotoksik analiz yöntemiyle yapılan su kalitesi çalışması su kalitesinin direkt canlı doku üzerinde etkilerinin gözlenmesi açısından güvenilirlik sağlamaktadır. Sunulan çalışmada, sonuçlarının çarpıcılığı nedeniyle İncesu Havzasından alınan su numuneleri için yürütülen in vitro sitotoksisite çalışmaları örnek olarak verilmiştir. Elde edilen sonuçlar ışığında in vitro sitotoksisite testlerinin rutin su kalitesi analizlerine eklenmesi gerektiği önerilmektedir.

The aim of the study was to determine the fertility traits of the Kangal Akkaraman sheep in Yildizeli and Central districts of Sivas. In this study, six years data obtained from breeders between 2013 and 2018 were used in National Animal Improvement Project coordinated by the Turkish Ministry of Agriculture and Forestry. In the first year of the study, 70 enterprises in 48 villages from both districts included in the projects and these were reduced to 57 enterprises in 33 villages in the sixth year. During the six-year period, 86116 lamb records obtained from a total of 76383 ewes in all enterprises were evaluated. Overall average birth rate was 92.7%. While the differences between years were statistically significant, differences between districts were not significant. Thetriplet births were also observed but they were not evaluated separately because of their low rate (0.1%), so they were included in twin births and evaluated as twins. The average twin birth rate was 22% and differences between years, districts and mating periods (five months between August and December) were significant for that. Overall average weaned lamb rate or the survival rate of the weaning period was 91.3% and differences according to years, districts and lambing periods (five months between January and May) were statistically significant for that. According to the values obtained from 5147 lamb records that were born from 4242 ewes of known age in a sub-project of year 2013; the ages (1-10) of sheep were found to have an effect on the birth type, while it was found to be statistically insignificant for the survival rate. According to the results of the research, it would be useful to take into account the factors that increase fertility in order to maximize profitability in the study area and enterprises with similar conditions.

Weed-competitive cultivars are desired in the wake of growing popularity of organic farming, environmental pollution and evolution of herbicide resistance in weeds. This research work evaluated the weed competitive ability of three forage maize cultivars (ADA-523, AGA and SASA-5) against the noxious weed barnyardgrass (Echinochloa crus-galli (L.) P.Beauv.). The study was conducted in spring 2018 and repeated in summer 2018. Results of this study showed that maize-barnyardgrass competition significantly decreased the growth of forage maize plants. For instance, barnyardgrass decreased the maize plant height by 11.9-16.9%, leaf length by 13.3-20.2%, leaf width by 20.2-27.4%, and number of leaves by 14.3-25.0%. Fresh and dry weights of maize plants were also significantly decreased as a result of weed-crop competition. Barnyardgrass decreased the shoot fresh weight (30.7-60.6%), shoot dry weight (33.3-52.2%), leaf fresh weight (33.4-56.5%) and leaf dry weight (31.9-50.0%) of the maize plants. An interactive effect of weed × maize cultivars was found non-significant. Forage maize cultivars also varied occasionally for their traits. Nevertheless, ADA-523 had a higher plant height, leaf length, leaf width, leaf fresh weight and leaf dry weight than the cultivars AGA and SASA-5. On the other hand, the cultivar SASA-5 had a higher shoot fresh weight, shoot dry weight and root fresh weight than the other cultivars in the study. This research work concluded that the forage maize cultivars in the study did not vary for the weed-competitive ability. Further, barnyardgrass-maize competition could decrease the growth and development of the maize cultivars.

It is stated that concrete, which is the basic building block of most of the buildings built today, is the most consumed the construction material in the world after water. cement is that is the main ingredient of concrete, has significant share because of the cost of concrete, the use of various additives as a cement substitutes is the subject of many studies. However, it should firstly be determined to what extent the additives used to affect the concrete properties. In this study, it was tried to determine to what at level the use of the ash of rice husk as a cement substitute changed some concrete properties. Within the scope of the study, the usability of the raw form of rice husk as aggregate in concrete was evaluated and thus an effective method in the disposal of rice husk, which is a agricultural waste, was tried to be determined. The study results show that the addition of both ash of rice husk and rice husk aggregate significantly alter almost all properties of concrete. These changes are at different levels for different characteristics. As a result of the study, it was determined that as the amount of foam increased, the flow diameter increased, while the addition of rice husk decreased the flow diameter. It was determined that the addition of rice husk decreases the depth of water penetration depending on time, the porosity of the samples with the high level of rice husk addition increases, and the compressive and flexural strength decreases.

In this research, some physicochemical and microbiological characteristics and mineral compositions of marmalades produced by traditional method using Berberis integerrima Bunge (purple barberry), Berberis vulgaris L. (pink barberry), Rosa pimpinellifolia L. (black rosehip), Rosa canina L. (pink rosehip), Malus sylvestris Miller (sour apple), and Vaccinium corymbosum L. (blueberry) wild fruit naturally grown in Bayburt and Trabzon provinces were determined. As a result of the research; pH 2.56-4.18, titration acidity (in terms of citric acid) 0.62-3.40%, dry matter 53.65-64.90%, water soluble dry matter 52.28-64.53%, water activity 0.818-0.894 and HMF (5-hydroxymethyl-2-furfural) were detected in the range of 5.81-53.40 mg/kg. As a result of microbiological analysis, total aerobic mesophilic bacteria, coliform group bacteria and yeast-mold were not detected in any of the samples. In the marmalade samples, the macro minerals Ca, K, P and Mg are ranged from 23.56-425.12 mg/kg, 1275.74-5918.10 mg/kg, 21.98-921.26 mg/kg and 125.50-776.23 mg/kg, respectively. Of the micro-minerals Fe 4034.85-22346.74 µg/kg, Mn 531.63-15065.91 µg/kg, Zn 345.40-6250.76 µg/kg, B 2872.99-7300.37 µg/kg, and Ba were found between 689.31-6455.24 µg/kg. The results of heavy metal analysis showed that marmalade samples were within reliable limits. It is concluded that these fruits, which are not usually consumed as table, but have rich mineral composition, characteristic taste and pleasant aroma, can be evaluated in marmalade production. In the years when the yields of wild fruits are high, it can be processed into products with long shelf life such as jam and marmalade and converted into added value can contribute to the regional economy.

Akışkan yatak sistemi, ağır sanayiden, eczacılık, kimya ve gıda sanayisine kadar geniş kullanım alanı bulmaktadır. Bu sistemde küçük katı parçacıklar hava ile temas ettirilir ve hareketleri sağlanarak yatak içerisinde askıda tutulmaları sağlanır. Yatak içerisinde akışkanlaşmanın başladığı andaki hız olarak tanımlanan minimum akışkanlaşma hızı, akışkan yatak sistemlerin en önemli tasarım ve işletme parametresidir. Toz gıdalarda akışkan yatak, kurutma, aglomerasyon, granülasyon ve kaplama proseslerinde yaygın olarak kullanılmaktadır. Akışkan yatak teknolojisinde birçok olay eş zamanlı olarak gerçekleştiğinden sistem üzerine etki eden çok sayıda değişken mevcuttur. Bu derlemede, akışkan yatak, toz gıda proseslerinde akışkan yatak uygulamaları ve akışkan yatak sisteminin kullanılması sırasında dikkat edilmesi gereken parametreler hakkında bilgi sunulmaktadır.