This study was conducted to determine the current status of dairy cattle farms in Niğde, to detect basic priority problems and to offer some solutions. In the study, representing all provinces, total 95 dairy farms selected by stratified and random sampling method was taken. The data obtained from the surveys in farms, face-to-face was used. The results showed that the large portion of dairy cattle breeders (60%) were primary school graduates, the average duration of cattle breeding was 15.2 years, a significant proportion of labor (92%) of family labor was used, 54%, 19%, 15%, 6%, 4% and 2% of farms reared only Holstein, Holstein and Simmental, only Brown Swiss, only Simmental, Holstein and Brown Swiss, and Simmental and Brown Swiss respectively, the average number of animals per farm was 33, the number of dairy cows was 13, the average daily milk yield per lactating cow was 16.6 kg. Farmers agreed that the most important problems were the high cost of basic inputs, concentrated feed problem, low cost of products sold, roughage and pasture problem. In addition, according to Likert scale, the most satisfied activities were reared cattle breed (3.95), breeder’s organization services (3.94), milking process (3.76), calving and maintenance duties (3.74) and recording system (3.71). Beside, for the breeders, the worst issues were satisfied that Ministry policies about cattle breeding (1.83), sales price and the market situation of animals (1.96), sales price and the market situation of the milk (2.04), provision of essential inputs such as feed and labor costs (2.06), credit and financial support (2.08).

In order to study the quantitative variability of malting quality-related traits and to determine the genomic locations which control these traits, an experiment was conducted using one hundred fifty double haploid (DH) lines of barley and their two parents ‛Steptoe’ & ‛Morex’. Protein content (%) was measured using Kjeldahl method, diastatic power calculated with Lintner formula, Malt extract was measured for each by special weight achieved and based on Malt Berix Charts. Transgressive segregation in both directions was observed for all traits. Genetic map is fairly saturated and comprising 327 RFLP markers with a total length of 1226.3cM with an average marker spacing of 3.75cM. Seventeen QTLs by LOD≤2(LRS≤9.21) controlling different studied traits were identified for all studied traits. Total phenotypic variance explained by these QTLs varies from 23.2 to 45.05%. Highest LOD scores were obtained for QTL’s controlling diastatic power (Qdip3Ha) on chromosome 3H, and lowest LOD scores were obtained for QTL’s controlling seed yield per plant (Qsyp1Hb) on chromosome 1H. Therefore gain through marker-assisted selection (MAS) in this population would be limited and some of the “Steptoe× Morex” population was developed with the intention of isolating and advancing barley lines for release to the malting quality.

The source of water, the content and quality is very important used in every stage of poultry production. The birds must have continuous access and supply of quality water without any antibiotic and bacteriological residues. Sensory, physiochemical properties and chemical composition must be taken into consideration while assessing water quality. The quality of water used in the production of conventional or organic poultry has impacts on the poultry health, quality of products and human health. The impact of water quality is higher on the functionality of water in live organism and the consumption amount varies depending on many factors. A source of water which is used in organic production is also important with their characteristics. Different water sources may be used for animal consumption, such as springs, shallow wells, deep and artesian wells, lakes and creeks. Organic farms should regularly submit water samples to a laboratory for testing of water quality against the possibility of contamination of water sources. Water contaminants could create equipment problems and restrict the amount of water available for consumption therefore affects the quality of products. There are many aspects to the broad problems of water quality and different physical and chemical applications used to ensure sustainability of water quality for human and animal use. In this review, it will be focused on the quality of the water to be used in the organic poultry production and quality enhancing physical and chemical applications.

Gyromitra is one of the poisonous mushrooms with being evaluated as edible mushrooms in Turkey and in many countries. This study was performed to determine volatile aroma compounds of Gyromitra collected from Turkey at Horticulture Department of Çukurova University, Adana-Turkey in 2011. Gyromitra mushroom samples collected from Adana province of Turkey were used as material. Volatile aroma compounds were determined using Headspace Gas Kromotografi Mass Spectrometry (HS-GC/MS) technique. Twenty-four different volatile aroma compounds were detected in this study. Phenol was identified as the major aroma component at 47.10% content. This compound was followed with Carbamic acid methyl ester (14.12%), Acetic acid (4.47%), 1-Octen-3-ol (4.14%) and Acetaldehyde (4.10%). Phenol is an antioxidant compound and it has anti-carcinogenic effect. 1-Octen-3-ol is an alcohol which commonly found in mushroom. Acetic acid and Acetaldehyde are poisonous compounds. Although high number of phenol and 1-Octen-3-ol in Gyromitra fungus is displayed as flavor and significant in terms of health, containing toxic compounds such as acetic acid and the acid aldehyde raises the risk factors in exhaustion.

Barley, as animal feed, raw material for malting and human food, constitute an important part among cereal sources in the world. Majority of barley that produced both in Turkey and other countries of the world, is being used as animal feed. Poor baking quality, taste and appearance of barley restricted its use in human nutrition. However, recently high protein, fiber, especially β-glucan and high starch content appeal to food industry. Many scientific researches established that β-glucan, a soluble fiber, has an effect in healing coronary-hearth diseases, lowering blood cholesterol level, balancing blood sugar level, preventing obesity. Being a healthy cereal that can be used in various purposes, and an additive in many food products, barley is considered a very promising cereal, and research to increase possibilities of its use in human nutrition is being increased. In the literature, there has been researches on making noodles, bulgur, kavut (roasted cereal), breakfast cereals. In this study the researches relating to evaluation of barley, importance of which is increased every day, as human food was reviewed.

This study was carried out to investigate the effect of udder measurements group on somatic cell count (SCC) and daily milk production. Milk samples and udder measurements were collected monthly from 79 lactating Holstein cows on commercial dairy in the province of Niğde. In the study, front teat length (FTL), rear teat length (RTL), front teat diameter (FTD), rear teat diameter (RTD), distance between front teats (DBFT), distance between rear teats (DBRT), front udder height, (FTH), rear udder height (RUH), distance between front and rear teats (DBST) were obtained in before afternoon milking. Udder measurements were divided into 5 groups according to the measurements. The effect of DBFT, DBRT, FTH, RTD, FTD and DBRT groups on daily milk production were statistically significant, while FTH, RUH and DBRT were found non-significant. The effect of udder measurements groups on SCC was found not significant, except rear teat diameter (RTD). Average daily milk production and SCC were estimated as 28.25 kg/day and 274.90 cell/ml, respectively. In conclusion, it can be said that the distance between teats, teat’s diameter and front udder height of Holstein cattle is important factor for milk yield of Holstein dairy cattle. Also, SCC is effected by rear teat diameter.

In order to study the quantitative variability of malting quality-related traits and to determine the genomic locations which control these traits, an experiment was conducted using one hundred fifty double haploid (DH) lines of barley and their two parents ‛Steptoe’ & ‛Morex’. Protein content (%) was measured using Kjeldahl method, diastatic power calculated with Lintner formula, Malt extract was measured for each by special weight achieved and based on Malt Berix Charts. Transgressive segregation in both directions was observed for all traits. Genetic map is fairly saturated and comprising 327 RFLP markers with a total length of 1226.3cM with an average marker spacing of 3.75cM. Seventeen QTLs by LOD≤2(LRS≤9.21) controlling different studied traits were identified for all studied traits. Total phenotypic variance explained by these QTLs varies from 23.2 to 45.05%. Highest LOD scores were obtained for QTL’s controlling diastatic power (Qdip3Ha) on chromosome 3H, and lowest LOD scores were obtained for QTL’s controlling seed yield per plant (Qsyp1Hb) on chromosome 1H. Therefore gain through marker-assisted selection (MAS) in this population would be limited and some of the “Steptoe× Morex” population was developed with the intention of isolating and advancing barley lines for release to the malting quality.

Concentrations of selected metals (Cu, Cd, Ni, Pb, Mn, Fe, Zn, Cr and Co) in some ready-to-eat-foods consumed in Nigeria were investigated with a view providing information on the risk associated with the consumption of these products. The concentrations of metals (mg.kg-1) in these ready-to-eat-foods are in the ranges of 2.4 – 5.2 for Cu; 0.1– 0.8 for Cd; 0.7 – 4.0 for Ni; 8.1 – 53.7 for Fe; 8.9 – 20.0 for Zn; 0.1 – 3.8 for Pb; 5.1 – 14.4 for Mn; 0.83 – 21.4 for Cr and 0.20 – 1.32 for Co. The concentrations and estimated intakes of Cd, Ni and Pb in some of these food types exceeded the permissible limits and tolerable daily intake respectively. The target hazard quotients (THQ) for the individual metals indicate levels of concern for Ni, Cd, and Co in some of the ready-to-eat-foods. The combined THQ values for the metals in the examined samples ranged from 1.7 to 10 with significant contributions from Cd, Ni and Co.

The Central Anatolia Region is one of the seven geographical regions which are 151 thousand square meters of surface area and it is about 21.0% of Turkey's land area. The population rate of cattle breeds in the Central Anatolia Region is 20.4% exotic cattle breeds, 19.1% crossbred, 11.6% native cattle breeds and total 18.1% in Turkey. The Central Anatolia Region cattle population is consists of 43.9% of exotic breed, 43.5% crossbred and 12.6% the native cattle breeds. The population of exotic cattle breeds (69.5%) in Nigde province is the first place and followed by Eskisehir provinces rate of 65.6% in the Central Anatolia Region. The rate of crossbred cattle population is the highest rate (65.0%) province of Sivas and followed by Çankırı province (62.8%). Ankara and Yozgat province has the highest rate of native cattle breed 28.3% and 25.5%, respectively. The total populations of cattle breeds in Konya and Kırıkkale provinces were found maximum 518.291 cattle and minimum 45.426 cattle, respectively, in the Central Anatolia Region. The population rate of exotic and crossbred cattle breeds has increased 67.0% and 11.8%, respectively, while population rate of native cattle breeds has decreased 30.3% from 2007 to 2011 in the Central Anatolia Region. The 20.1% of sheep, 8.2% of goat and 18.3% rates of total livestock population in Turkey are in the Central Anatolia Region. The population rate of sheep and goat of the Central Anatolia Region is 20.1% and 9.5%, sheep and goat respectively and 18.3% total in Turkey. The 70.9% for Angora goats, 8.2% hair of goats, and 17.7% indigenous of sheep breeds and 66.0% crossbreed to national Sheep and Goat population has risen in the Central Anatolia Region. All of these results are evaluated, Central Anatolia Region, Turkey, the contribution of animal products grown by population of cattle and small ruminants is important and can be considered a center of attraction for investment in animal breeding

Although there is no a significant increase in the cultivation areas of oil crops in last two decades, production amount of them shows 52.2% increase. Sunflower which has the first rank in terms of cultivation area and as well as production in cultivation of oilseed crops in our country, comes to fore as basic oil plant in Central Anatolia Region and it is followed by safflower in rank. Becoming widespread of safflower cultivation in fallow fields will make great profits to as well as farmers in the region and as well as country's economy in central Anatolia Region of Turkey which is 59% of total Turkey in term of fallow fields.