RESUMO A palma tem grande importância para a pecuária da região semiárida do Brasil. Essa planta vem apresentando elevada produtividade de forragem, influenciada por vários fatores de manejo. Objetivou-se avaliar o efeito de doses de adubação orgânica (20, 40 e 80 t/ha de esterco bovino/ha/dois anos) e densidades de plantio (20, 40, 80 e 160 mil plantas/ha) sobre a produtividade da palma forrageira Clone IPA-20 (Opuntia ficus indica Mill). O experimento foi conduzido na Estação Experimental de Caruaru, pertencente ao Instituto Agronômico de Pernambuco - IPA. O delineamento experimental foi em blocos casualizados, com arranjo de parcelas subdivididas. Verificou-se maior produtividade de parte aérea com o aumento da densidade populacional e aplicação de 80 t de esterco/ha/dois anos, com valores de 61; 90; 117 e 139 t MS/ha/dois anos, nas densidades de 20, 40, 80 e 160.000 plantas/ha. A produtividade do cladódio-planta e peso seco da raiz foram influenciados pela densidade de plantio, apresentando respostas exponenciais, tendendo a apresentar maior peso do cladódio planta e raízes por área com a elevação da densidade de plantio. A eficiência da adubação orgânica diminuiu com a elevação das doses de esterco. Recomenda-se para plantios com 160.000 plantas/ha aplicação de, no mínimo, 40 t de esterco bovino/ha/dois anos para incremento na produtividade da palma. | ABSTRACT Cactus is crucial for the livestock of semi-arid regions in Brazil. This plant has shown the high productivity of forage, which is influenced by several management factors. This study aimed to evaluate the effect of organic fertilization doses (20, 40 and 80 t/ ha of bovine manure/ha/two years) and planting densities (20, 40, 80 and 160 thousand plants/ha) on the productivity of cactus pear Clone IPA-20 (Opuntia ficus-indica Mill). At the Experimental Station of Caruaru at the Agronomic Institute of Pernambuco, IPA has conducted the experiment. The experimental design was randomized blocks, with split plot arrangements. Higher shoot productivity was observed with increased population density and the application of manure at 80 t ha-1 two years-1 with values of 61, 90, 117 and 139 t DM ha-1 two years-1 at densities of 20, 40, 80 and 160,000 plants ha-1. The planting density influenced the productivity of cladode-plant and root dry weight, showing exponential responses, with higher cladode-plant and roots weight by area observed with increased plant density. The efficiency of organic fertilization decreased with the increase in manure doses. For increase cactus productivity, 40 t of bovine manure ha-1 two years-1 for plantations with 160,000 plants/ha is recommended.

Seven biochemical descriptors were used to estimate the genotypic variability of peanut in response to moderate water stress. Six genotypes, constituted by four lines and two cultivars, were grown in pots, each containing two plants. At 15 days after emergence (DAE), the treatment differentiation was carried out: Control-plants maintained with daily watering, and Stress-plants submitted to water stress by complete suspension of watering for 15 days. The experimental design was completely randomized with factorial scheme 6 x 2 (genotype x water treatments), with five replications. The biochemical variables evaluated were: catalase (CAT), ascorbate peroxidase (APX), guaiacol peroxidase (GPX), free proline, total carbohydrates, soluble proteins, and amino acids. Results obtained by biochemical analysis and estimation of genotypic variability indicated that proline is the most appropriate descriptor for selecting genotypes tolerant to water stress, which led to identification of L81V and L108V as promising lines for drought tolerance breeding program.

The northern region of Piauí state is an important center of irrigated organic fruit farming, wherein sandy soils with low organic matter content are predominant, besides climate with high temperatures, long periods of water deficit and constant wind. Given this situation, it becomes necessary to investigate alternative management options able to meet the challenges of agricultural productivity. In this context, green manuring becomes an important practice, mainly when using fast - growing species and with great potential for biomass production. Thus, a study was carried out at Embrapa Meio - Norte to measure Crotalaria juncea biomass yield after thinning and at various sowing densities. The evaluated parameters were plant height, stem diameter, number of branches per plant, fresh and dry weight of shoots and roots. The results showed that sowing density had no influence on plant height; however, unthinned plants reached greater heights, which might have been due to reduced competition for light. Thinning had no effect on diameters of plant stem base; on the other hand, lower planting densities promoted larger diameters also due to less competition. Likewise, the number of branches per plant was not affected by thinning, being greater at lower planting densities on account of less competition. Thinned plants achieved higher averages of fresh shoot weight. Nevertheless, shoot dry biomass was greater at higher planting densities. Furthermore, both fresh and dry weight of roots were not influenced by any of the adopted treatments.

The aim of this study was to evaluate the performance of progenies from Citrullus lanatus var. lanatus (cultivated watermelons) when crossed with progenies from C. lanatus var. citroides (fodder watermelon with a historic of resistance to the nematode Meloidogyne enterolobii). The parents and their F1s were evaluated for resistance to this nematode. In the initial stages of eleven treatments, watermelon seedlings plantlets were transplanted to plastic bags of six kilograms once the first leaves developed. Ten inoculated plants with 5,200 eggs in the soil near the stem of the plant and four non-inoculated ones were used in each treatment, in a complete block design. Sixty-two days after sowing, the following characteristics were evaluated: the length of the aerial part of the plant (LAP, in m), fresh mass of the aerial part (FMAP, in g), root fresh mass (RFM, in g), egg number (EN) and reproduction factor (RF). A comparison between the averages of inoculated and non-inoculated plants was performed using Scott-Knott test at 5% and the diallelic analysis was performed using the GENES program. The morphological characteristics did not allow for the identification of the parent plants or the F1s with respect to nematode resistance, but the variables EN and RF were useful for such identification. The analyses of the general and specific combining abilities indicate highly significant effects with respect to this resistance, showing additive gene effects as well as dominance and epistatic gene effects, allowing for identification of parents and F1s that can be used in watermelon breeding programs to improve resistance to the M. enterolobii.

The aim of the study was to evaluate the morphological and productive characteristics of five genotypes of Desmanthus spp. submitted to two cutting intensities (20 and 40 cm), in the semi-arid region of Pernambuco. Of the genotypes studied, three were derived from ecotypes collected in municipalities of Pernambuco (7G, 31D and 50J) and two were from the state of Sergipe, coming from Australia (10AU and 13AU). Four cuttings were made with a frequency of 60 days. The treatments were randomized in blocks, with split plots and three replications. The variables studied were plant height, stem diameter, canopy diameter, the number of leaves per branch, LAI, leaf yield, stem yield, pod yield and forage yield, and leaf stem-1 ratio and pod stem-1 ratio. Genotypes 7G and 31D had higher forage yield and a larger number of leaves per branch. Forage yield was higher in the intensity of 20 cm. The cuttings reduced the total yield, stem yield, pods yield and forage yield, of the different genotypes studied. For leaf stem-1 ratio, the genotype 13AU was higher than genotypes 7G and 50J in the cutting intensity of 40 cm. Genotype 10AU had the highest pod stem-1 ratios in the three cuttings. The differences shown between genotypes of Desmanthus spp., especially 7G and 31D, in the intensity of 20 cm, indicate the possibility of selecting promising materials for cultivation in the semi-arid region of Pernambuco, with desirable morphological and productive characteristics to the forage plants.

The cultivation of Litopenaeus vannamei has increased in inland areas by using low salinity waters. Cultivation techniques in coastal waters are well developed, however, studies for low salinity conditions are needed, especially regarding the ideal ionic composition of water and its effects on the zootechnical indices. Brazil has adopted this strategy and the semiarid region showed great potential due to its favorable climate and water conditions. Thus, experimental cultivations were conducted in Serra Talhada, State of Pernambuco, in order to evaluate the influence of two feeding strategies (with and without feeding) and three cultivation densities (5, 10 and 15 shrimps m-2), on the production variables of this species. Three ponds of 280 m2 were built, in which six nursery nets of 20 m2 were installed. The cultivation was performed with juvenile shrimps of 8.53 g and lasted 50 days. The animals were fed twice a day with commercial feed containing 25% of crude protein. The water quality (salinity ~1.0 g L-1, temperature ~28.09°C, pH ~8.48) and the shrimp growth were monitored with weekly biometry during the cultivation. A significant difference was found only in the treatment without feeding with 15 shrimps m-2, the average final weight of all treatments ranged from 13.16±1.33 g to 15.50±1.66 g. The survival rates were high in the treatments with feeding and its variation between treatments was 60.56±6.76% and 83.00±4.00%.

The Mangalarga Marchador breed accounts for the largest horse herd in Brazil and has been experiencing national and international expansion. Nevertheless, there is little scientific production on the evolution of this breed and there are no studies on the morphometric transformations that took place during its formation. In this context, the present study aimed to assess the evolution in morphometric measures of the Mangalarga Marchador breed between 1970 and 2010. The research used information archived at the Brazilian Association of Mangalarga Marchador Breeders from 23,148 males and 92,980 females in a completely randomized experimental design. The six treatments consisted of the animals measured between 1970 and 1979, 1980 and 1989, 1990 and 1994, 1995 and 1999, 2000 and 2004, and 2005 and 2010, respectively. The measures assessed were: height at withers and croup, length of the head, neck, back, croup, shoulder, and body, width of the head and croup, thoracic circumference, and cannon circumference Over the period analyzed, males and females experienced a reduction in thoracic circumference, in the lengths of the head, back, croup, and shoulder, and in the widths of the head and croup. In the males, neck length and cannon circumference also decreased, while body length increased in females. Over time, breed selection led to smaller head, higher stature, and shorter trunk length. However, important measures for the breed’s functionality, such as shoulder length and thoracic circumference, decreased.

The amount of fungicide that adheres to the leaf during spraying and the amount that remain on the leaf after weathering are the main factors that defines the amount of active residue on the leaf surface to effectively control plant pathogens. Thus, the objective of this work was to evaluate the tenacity and persistence of copper in citrus seedling leaves under simulated rainfall in Jaboticabal, State of São Paulo, Brazil. The evaluated variables were copper content, solution retention, surface tension and drop spectrum. A significant and inversely proportional linear relationship to drops <100 μm was found. The percentage of copper retained in leaves of citrus seedlings with copper fungicides of suspension concentrate (SC) formulations after simulated rainfall was greater than 80%. Copper fungicides of SC formulations presented the lowest surface tension, allowing greater tenacity and persistence of copper on seedlings of citrus leaves after simulated rainfall and increased contact between the drops and leaf surface.

The ramularia leaf spot (RLS) disease causes cotton yield losses. Choosing a less susceptible cultivar and a sowing time that are less favorable to the pathogen contribute to the management of this disease. The objective of this work was to evaluate the severity of ramularia leaf spot on cotton cultivars sowed in two different times. The experiment was conducted in a triple factorial design (4x3x2), consisted of four cultivars, the three thirds of the plant and two sowing times, with four replications. Each plot was divided in two twin plots, one with fungicide application (with disease control) and the other without fungicide application (without disease control). The severity assessments were performed every seven days, considering each third of the plant with a diagrammatic scale. Yield was evaluated in each plot. There was a significant interaction between sowing times and the thirds of the plant in the plots without disease control for RLS severity, with the highest values of area under the disease progress curve (AUDPC) in the first sowing time (ST1) and in the lower third of the plant. The FMT705 cultivar had the highest and FM951LL the lowest value of AUDPC. The AUDPC of these cultivars were no statistically different in the second sowing time (ST2), but they had higher AUDPC values in the lower third. Highest yields were found with ST1 in plots with disease control, with no differences between the cultivars, however, lower yields were found in plots without disease control.

Two experiments were performed for the purpose of determining the nutritional value and assess the performance and carcass traits in pigs fed on canola meal (Brassica napus). Experiment I consisted of a total digestibility trial conducted with 14 castrated commercial crossbred male pigs with 60.69 ± 4.26 kg initial live weight. The treatments consisted of a control diet based on maize and soybean meal and another diet containing canola meal (control + 25% canola meal). Each pig was an experimental unit, totalling seven experimental units per diet. The digestible energy and the metabolizable energy of canola meal used was 2,999 and 2,730 kcal.kg-1, respectively. These values were used to formulate the diets of the performance experiment. Experiment II included 50 crossbred pigs with an average initial live weight of 29.90 ± 1.16 kg and an average final live weight of 60.33 ± 3.38 kg during the growing phase, and an average initial live weight of 60.37 ± 1.6 kg and an average final live weight of 90.37 ± 3.19 kg during the finishing phase. The experimental design consisted of randomized blocks, with four treatments (6, 12, 18, and 24% canola meal), 10 repetitions, and one pig per experimental unit. The control diet was formulated with 0% canola meal. The data were assessed using ANOVA test and the averages of the treatments were compared using Dunnett's test and regression analysis at a 5% probability level. The results suggest that it is possible to use up to 24% canola meal in the diets for pigs during the growing and finishing phases without affecting the performance and carcass traits.