Moisture content gradient in a softwood board during drying: simulation from a 2-D model and measurement
1996
Pang, S.
A 2-D mathematical model was developed to simulate moisture movement and heat transfer in width and thickness directions within a softwood board during drying. The model is based on wood physiological features and behaviour observed during drying. In sapwood, liquid water movement is assumed to be a consequence of capillary action between liquid and gas phases inside the cell lumens. However, liquid flow does not occur in wood close to the exposed surfaces because at timber surfaces the wood cells are damaged during the sawing process and consequently the liquid column is broken. In heartwood, liquid flow is negligible since the pits are normally aspirated during the formation of heartwood in the growing tree. Water vapour moves under a partial vapour pressure gradient while bound water diffuses within the wood material due to differences in chemical potential. The model was solved numerically to predict moisture-content profiles. Experiments were undertaken to measure the moisture-content gradient. Samples were removed from a tunnel dryer at intervals throughout drying, frozen overnight and then cut into slices for moisture-content determination. The experimental results were used to verify the model.
Mostrar más [+] Menos [-]Palabras clave de AGROVOC
Información bibliográfica
Este registro bibliográfico ha sido proporcionado por National Agricultural Library