Waste heat recovery of diesel engine using porous medium-assisted thermoelectric generator equipped with customized thermoelectric modules
2019
Choi, Young | Negash, Assmelash | Kim, Tae-yŏng
In this study, thirty of customized bismuth-telluride (Bi₂Te₃) thermoelectric modules (TEMs) were fabricated for waste heat recovery of a diesel engine using a thermoelectric generator (TEG). By installing a plate-type porous medium whose porosity ranges from 0.121 to 0.516 in the TEG, the effects of the porosity on energy harvesting performance were investigated. Experimental results show that at the highest engine rotation speed of 1400 rpm, a maximum power output of 98.3 W was obtained using the lowest porosity (0.121), and a maximum energy conversion efficiency of 2.83% was obtained using the optimal porosity (0.416). The most significant improvements in the power output and conversion efficiency compared with the base case without porous media were 44.5% and 10.1% with porosities of 0.121 and 0.416, respectively, at the lowest engine speed of 1000 rpm. We concluded that the conversion efficiency and power output of the present TEG can be maximized via application of porous media with porosities of 0.461 and 0.32, respectively. The use of a porous medium with a porosity of <0.32 in the present TEG configuration should be avoided, as the backpressure would exceed the allowable limit of ~3 kPa for a passenger vehicle.
Mostrar más [+] Menos [-]Palabras clave de AGROVOC
Información bibliográfica
Este registro bibliográfico ha sido proporcionado por National Agricultural Library