Investigating the contrast of surface marking on different color connectors for telecommunications needs
2023
Raubiška, Daniels | Adijāns, Imants | Yankov, Emil | Lazov, Lyubomir
The development of marking technologies for telecommunications connectors requires increasingly detailed information about their applications. One solution is to use QR codes that contain sufficient information about the connectors’ applications. Accurate marking of connectors requires a precise marking system, such as a laser marking system. In this study, a Rofin PowerLine F20 Varia fibre laser was used to mark four different types of ABS plastic connectors in various colours. To achieve optimal marking for all four colours, three experiments were conducted to achieve contrasting marking and high roughness. Easy QR code reading was achieved with an average marking power of 3 W to 4.2 W, a laser marking speed of 300 mm/s to 500 mm/s, and a scanning frequency of 50 kHz to 70 kHz at a constant pulse duration of 8 ns and raster spacing of 50 µm. The microstructural changes and change in roughness were determined using a laser scanning microscope (Olympus OLS5000), which revealed structural changes on the surface and an increase in relative roughness from 39% to 76%. This experiment shows that different parameters of the laser marking mode are required for each colour.
Mostrar más [+] Menos [-]Palabras clave de AGROVOC
Información bibliográfica
Editorial Rēzeknes Tehnoloģiju akadēmija
ISSN 2256-070XEste registro bibliográfico ha sido proporcionado por Fundamental Library of Latvia University of Life Sciences and Technologies