Control strategies for disinfection byproducts by ion exchange resin, nanofiltration and their sequential combination

● Effects of AER adsorption and NF on DBP precursors, DBPs, and TOX were examined. ● A treatment approach of resin adsorption followed by nanofiltration was developed. ● Both DOC and Br− could be effectively removed by the sequential approach. ● DBPs, TOX, and cytotoxicity were significantly reduced by the sequential approach. Disinfection byproducts (DBPs) are emerging pollutants in drinking water with high health risks. Precursor reduction before disinfection is an effective strategy to control the formation of DBPs. In this study, three types of anion exchange resins (AERs) and two types of nanofiltration (NF) membranes were tested for their control effects on DBP precursors, DBPs, and total organic halogen (TOX). The results showed that, for AER adsorption, the removal efficiencies of DBP precursors, DBPs, and TOX increased with the increase of resin dose, and the strong basic macroporous anion exchange resin (M500MB) had the highest removal efficiencies. For NF, the highest removal efficiencies were achieved at an operating pressure of 4 bar, and the membrane (NF90) with a smaller molecular weight cut-off, had a better control efficiency. However, AER adsorption was inefficient in removing dissolved organic carbon (DOC); NF was inefficient in removing Br− resulting in insufficient control of Br-DBPs. Accordingly, a sequential approach of AER (M500MB) adsorption followed by NF (NF90) was developed to enhance the control efficiency of DBPs. Compared with single AER adsorption and single NF, the sequential approach further increased the removal efficiencies of DOC by 19.4%–101.9%, coupled with the high Br− removal efficiency of 92%, and thus improved the reduction of cyclic DBPs and TOX by 3.5%–4.9%, and 2.4%–8.4%, respectively; the sequential approach also reduced the cytotoxicity of the water sample by 66.4%.