A comprehensive investigation was engaged to determine the spatial distribution of Uranium (U) and the consequential chemical and radiological health risk associated due to the consumption of groundwater containing U, in Panchkula district. A well-accepted technique of fluorescence of U estimation in an aqueous medium was employed having a detection limit of 0.50 µgL-1. The chemo-radiological health risk and water quality index was computed using a standard equation of concerned agencies to determine the suitability for human health. The concentration of U was observed to vary from 1.70 – 12.28 µgL-1 with the mean value of 5.89 µgL-1 The concentration of U was far below the standard prescribed limits as per World Health Organisation, Atomic Energy Regulatory Board, and United Nation Environmental Protection Agency. Except  nitrate and total alkalinity in few samples, all water quality paramters were within the recommended limit of BIS. The annual effective dose (AED), excess cancer risk (ECR), and lifetime average daily dose (LADD) indicated no potential health issue due to the consumption of groundwater of studied locations. The correlation was computed between U and various macro-anions and cations present in water samples. U was observed to have a significant weak positive correlation with total dissolved solids (TDS), electrical conductivity (EC), and salinity.

Polyethylene terephthalate (PET) is one of the most common types of plastic waste found in municipal waste and has a negative impact on the environment, recycling and its use in concrete is an alternative solution to address these problems. The objective of the study was to evaluate the physical-mechanical behavior of hydraulic concrete with additions of PET plastic bottle fibers and natural river aggregates. The concrete was evaluated in its fresh state by means of the Slump and in its hardened state by means of density and compressive and flexural strengths, for which cylindrical and prismatic specimens were prepared with PET fibers at proportions of 2%, 4%, 6% and 8% by weight of cement plus the standard concrete designed for 21 MPa. It was found that the slump and density of the concrete decreased with additions of PET fibers. The 28-day compressive and flexural strengths increased to optimum values of 22.79 MPa and 3.19 MPa at 2% and 6% PET fibers, respectively. It is concluded that the viable application of 2 mm by 30 mm PET fibers in concrete is at 4% with dosages of 15.78 kg/m3 added to the standard concrete for structural elements subjected to compression and flexure with sustainable production at low cost.

The production of saffron, the spice obtained from the dried stigmas of Crocus sativus L. (Iridaceae family) flowers, generates, after pruning, considerable quantities of waste containing natural dyes. Saffron flower waste could be a source of extraction of natural dyes with antioxidant activity. In this study, we investigate the possibility of using saffron flower waste for dyeing cotton and evaluating the antioxidant effect of this dye by the DPPH free radical, reducing power and β-carotene bleaching assay. The dye has been evaluated for the composition of the color by the UV-visible spectrum and tested for the dyeing of cotton. The results indicate the presence of polyphenols and flavonoids. The dyeing conditions have been optimized at 6% dye concentration, dye bath pH of 3, dyeing temperature at 98 °C and dyeing time of 60 min. 2% dye concentration with 5 to 10% mordant concentration remains sufficient for dyeing with pre-mordanting. The exhaustion of the bath after dyeing has been improved by a rate of 20% in the case of addition of mordants which have produced a shade of green color. The dye contributes to the significant antioxidant activities with more DPPH scavenging capacity, FRAP reducing power, and β-carotene bleaching inhibition. Cotton fabrics dyed with bio-dyes obtained from saffron flower waste show good color fastness properties and could be a potential source of natural antioxidant agent. It presents an important eco-friendly alternative to synthetic dyes for large-scale application in textile and food industries.

Mining is one of the most environmentally damaging human activities, having long-term health effects on humans. In this research, the levels of contamination, source distribution, and health risks of heavy metals to residents from drinking surface water near Riruwai mining sites were investigated. The findings of the study indicated that the heavy metal levels ranged from As (0.00–0.04 mg/L), Cd (0.00–0.04 mg/L), Cr (0.02–0.06 mg/L), Mn (0.02–0.07 mg/L), and Pb (0.00–0.05 mg/L), with mean levels of 0.02, 0.013, 0.03, 0.02, and 0.04 mg/L, respectively. The concentrations of all metals, with the exception of Mn and Cr, are higher than acceptable limits. The values of the heavy metal pollution index (HPI) for all the metals, with the exception of Mn, exceed the threshold limit of 100, indicating serious pollution of the surface water. This was confirmed by the results of Nemerow’s pollution index (NPI). Multivariable analysis revealed anthropogenic and natural sources as the main sources of heavy metal contamination, with Cd, As, Cr, and Pb originating from mining activities and Mn possibly coming from parent materials. The total hazard index (HI) and non-cancer risk (HQ) values in children and adults are within acceptable limits. However, the total life cancer risks (TLCR) of As and Cd were higher than the tolerable limit of 1.00E-06. Therefore, heavy metals in surface water, particularly As, Cd, and Pb, should be properly monitored and a treatment program implemented to safeguard the health of local residents, especially children.

The applicability of Polyetheretherketone/Polyvinylalcohol Nanocomposite Modified with Zinc Oxide Nanoparticles synthesized for eliminating humic acid rapidly from industrial wastewater. Identical techniques, including BET, FTIR, XRD, and SEM have been utilized to characterize this novel material. Also, the impacts of variables including initial humic acids (HAs) concentration (X1), pH (X2), adsorbent dosage (X3), and sonication time (X4) came under scrutiny using central composite design (CCD) under response surface methodology (RSM). The values of 10 mgL-1, 6.0, 0.025 g, and 5.0 min were investigated through batch experiments, considered as the ideal values for humic acids (HAs) concentration, pH, adsorbent dosage, and contact time, respectively. Adsorption equilibrium and kinetic data were fitted with the Langmuir monolayer isotherm model and pseudo-second-order kinetics (R2: 0.999) with maximum adsorption capacity (102.0 mgg-1), respectively.  The overall results confirmed that Polyetheretherketone/Polyvinylalcohol Nanocomposite Modified with Zinc Oxide Nanoparticles could be a promising adsorbent material for humic acids (HAs) removal from industrial wastewater.

The authors propose a methodology for assessing the sources of microplastic pollution (particles 0.5-5 mm in size), which makes it possible to differentiate coastal recreational areas according to the degree of vulnerability to microplastic accumulation. The methodology takes into account the sources of microplastics coming to the beach directly from vacationers - factors of recreational activities, as well as the influence of factors of the adjacent territory: the type of adjacent territory, saturation with transport infrastructure, etc. An analysis of the results of monitoring the microplastic concentration in beach and bottom sediments of seven beaches of the Sevastopol region with varying degrees of anthropogenic load during 2018–2020, as well as an assessment of the sources of microplastic pollution on these beaches using the proposed methodology, made it possible to differentiate these coastal recreational areas according to the degree of vulnerability to accumulation of microplastic pollution. The most vulnerable are the beaches that are actively visited by tourists and located in close proximity to large blocks of apartment buildings and extensive transport infrastructure (Pesochniy and Omega). The beaches Konstantinovsky and Goryachka (placed close tothe thermal power station), located in the zone of active navigation of ships of various tonnage, are confined to areas of low and moderate pollution. The main stream of vacationers on them are local residents with a high turnover rate. The least vulnerable are the beaches with park areas: Uchkuevka, Solnechny and Zolotoy. The source of microplastic pollution on these beaches is mainly vacationers.

Fungi are successful microorganisms in the bioremediation of environmental pollution. So, this study aimed to determine the potential of Trichoderma tomentosum to remediate cadmium, lead, and nickel contaminations from potato dextrose agar (PDA) and potato dextrose broth (PDB) media. Growth rates, toxicity tolerance sporulation, bio-sorption capacity, and bio-sorption efficiency of the fungus were evaluated under different concentrations of CdCl2, Pb(NO3)2, and NiCl2. The findings demonstrated that the growth rate of the fungus differed depending on concentration, metal type, and medium. More metals in PDA medium induced more inhibition on fungus growth rates; however, the rate was independent from the heavy metals concentrations in PDB medium. Cadmium was the most toxic metal tested against T. tomentosum, with a 72h LC50 of 37 ppm. It was about 3.16 and 4.24 times as toxic as nickel and lead, respectively. In the control condition, sporulation of the fungus began at 72 hours, but under the heavy metals, it began at 168, 168, and 192 hours, respectively, for Pb, Ni, and Cd. Both the bio-sorption capacity and efficacy of the fungus were significantly enhanced by an increase in metal content and the highest values were obtained at 200 ppm of the salts. The heavy metals total bio-sorption capacity order was Ni < Cd < Pb in the aqueous medium. The conclusion was that T. tomentosum has a greater potential for the biosorption of heavy metals; hence, the fungus may be employed for the bioremediation of heavy metals from polluted sites, particularly wastewater and industrial influents.

Efficiency of environmental resources is one of the goals of the sustainable development of a building and its sanitation. Sanitation efficiency was sought through hybrid offsite system, which was a decentralization of sanitation services. This study proposed a hybrid onsite system combining phytoarchitecture and phytosanitation, which empowers renewable building plants to improve resource efficiency, as well as sustainable building environmental health. Based on various empirical studies on sanitation management in rural and urban areas in many places, this retrospective study identified three wastewater disposal efficiencies. It was through quantity distribution, environmental media in which the greywater could be discharged, and quality treatment. The results marked the feasibility of wastewater services for greywater treatment, which served at least 75% of the wastewater quantity. Its main contribution was related to the distribution of discharge to all environmental media, and the improvement of the quality of greywater at its disposal. Building plants could be used for hybrid onsite system, thereby making these plants multifunctional to maintain the quality of the building environment. This hybrid onsite phytosanitation system covered various feasibility features compared to other existing systems. Implementation was flexible for new provisions and adaptation to existing systems for both urban and rural areas. Thus, the service maintained sustainable buildings and environmental health.

Hydrothermal carbonization is a thermal technique that offers numerous environmental benefits, particularly in managing solid waste streams by decomposing the raw materials of solid wastes and converting them into the renewable source of energy known as hydro-char. This study evaluates the heating value of hydro-char produced through the hydrothermal carbonization of cigarette butts, taking into account influential factors such as time, temperature, and pressure, as well as its benefits and economic implications, using a novel approach involving simulations aimed at reducing the number of required tests, saving time, and cutting costs.The range of 150 to 350 oC for temperature and 30 to 240 minutes for reaction time were considered and resulted in a thermal value range of 15.94 to 23.12 MJ/Kg for hydro-char, which makes its heat value greater than lignite coal and within the range of bituminous coal. The findings also indicated that temperature and time have a direct impact on the heat value, with time being the more influential factor, although high temperatures can expedite the reaction rate and should not be disregarded. Finally, the economic analysis of the project was conducted using the NPV method, which demonstrated that the viability of this method depends on the cost of coal, making it a promising alternative for accessing new and cost-effective fuel resources while considering environmental benefits. Besides, this study highlights the potential of hydrothermal carbonization as a viable and advantageous method for producing fuel resources from biomass and organic waste, and provides quantitative and comparable evidence of the applicability and benefits of the proposed hydrothermal carbonization methodology in comparison to conventional methods.

Aquatic macroinvertebrates play significant roles in the benthic zone of the aquatic ecosystem and they have different tolerance level to pollution. Globally, macroinvertebrates are usedas bioindicators in determining the ecological health and water quality status of aquatic ecosystem. Therefore, this study focused on the community structure of benthic macroinvertebrates in River Ugbalo, south-south Nigeria. Macroinvertebrates and physicochemical parameters were sampled in three marked out stations between March 2018 and February 2020. Physicochemical parameters were analyzed following standard procedures, while macroinvertebrates were collected with Kick net and Van Veen grab. Physicochemical parameters showed that the water quality of the three stations sampled were fair considering the values of pH, turbidity, sulphate, nitrate, phosphate, DO, BOD, and EC which were within the World Health Organization and Federal Environmental Protection Agency of Nigeria. Cluster analysis based on Bray- Curtis similarity showed that macroinvertebrates were clustered by stations rather than seasons. A total of 5,580 macroinvertebrates individuals were recorded showing high biodiversity in the river. Diptera was the most abundant Order with 2,488 individuals followed by Odonata with 697 individuals. The least represented Order was Lepidoptera with 13 individuals. The diversity indices showed that Margalef index (5.93), Simpson diversity (0.95), Evenness (0.63), and Shannon-Weiner index (3.30) were highest in Station 1. This research work showed that the water quality of the studied stations was fair and station 3 was the most perturbed station.  We recommend the enactment and enforcement of policies that will lead to aquatic ecosystem restoration.