The use of agro-biowaste compost fertilizers in agriculture is beneficial from technical, financial, and environmental perspectives. Nevertheless, the physical, mechanical, and agronomical attributes of agro-biowaste compost fertilizers should be engineered to reduce their storage, handling, and utilization costs and environmental impacts. Pelletizing and drying are promising techniques to achieve these goals. In the present work, the effects of process parameters, including compost particle size/moisture content, pelletizing compression ratio, and drying air temperature/velocity, were investigated on the density, specific crushing energy, and moisture diffusion of agro-biowaste compost pellet. The Taguchi technique was applied to understand the effects of independent parameters on the output responses, while the optimal pellet properties were found using the iterative thresholding method. The soil and plant (sweet basil) response to the optimal biocompost pellet was experimentally evaluated. The farm application of the optimal pellet was also compared with the untreated agro-biowaste compost using the life cycle assessment approach to investigate the potential environmental impact mitigation of the pelletizing and drying processes. Generally, the compost moisture content was the most influential factor on the density and specific crushing energy of the dried pellet, while the moisture diffusion of the wet pellet during the drying process was significantly influenced by the pelletizing compression ratio. The density, specific crushing energy, and moisture diffusion of agro-biowaste compost pellet at the optimal conditions were 1242.49 kg/m³, 0.5054 MJ/t, and 8.2 × 10⁻⁸ m²/s, respectively. The optimal biocompost pellet could release 80% of its nitrogen content evenly over 98 days, while this value was 28 days for the chemical urea fertilizer. Besides, the optimal pellet could significantly improve the agronomical attributes of the sweet basil plant compared with the untreated biocompost. The applied strategy could collectively mitigate the weighted environmental impact of farm application of the agro-biowaste compost by more than 63%. This reduction could be attributed to the fact that the pelletizing-drying processes could avoid methane emissions from the untreated agro-biowaste compost during the farm application. Overall, pelletizing-drying of the agro-biowaste compost could be regarded as a promising strategy to improve the environmental and agronomical performance of farm application of organic biofertilizers.

The co-occurrence of enhancement in aerosol concentration, temperatures, and ozone mixing ratio was observed between June 29 and July 4, 2018 (enhanced period, EP) on Long Island (LI) and the greater NYC metropolitan area during part of the 2018 Long Island Sound Tropospheric Ozone Study (LISTOS). Two aerosol formation pathways were identified during the EP, the first being the condensation of semi- and intermediate volatility oxidation products of anthropogenic volatile organic compounds (AVOCs) under stagnant synoptic flow conditions, high temperatures and afternoon sea-breeze circulation. While this first pathway was prevalent, the most abundant organic aerosol factor was less oxidized oxygenated organic aerosol or LO-OOA. The second formation pathway occurred during a period of more persistent (synoptic) on-shore flow transporting more aged aerosol which consisted of an internal mixture of more oxidized oxygenated organic aerosol (MO-OOA), methanesulfonic acid (MSA) and sulfate. It was estimated that 35% of the sulfate observed during the mature period (an average of about 1.2 μg m⁻³) originated from oceanic dimethyl sulfide (DMS) emissions. These two formation pathways helped elucidate the sources of fine particle pollution, highlighted the interaction between human emissions and natural DMS emission, and will help our understanding of pollution affecting other urban areas adjacent to large bodies of water during hot and stagnant periods.

The fragmentation of plastic materials into nanoparticles of less than 1000 nm (secondary nanoplastics) and their possible accumulation in the environment is a recent matter of concern. There are still no suitable standard methods for determining the concentrations and chemical makeup of these particles in aquatic systems and the fate and effect of nanoplastics in the aquatic environment has been little explored, although there has been research using engineered nanoparticles as models. In this review, we give a summary of the (mainly laboratory-based) studies on the influences of nanoplastics. We aim to provide an updated overview of this emerging topic, reviewing the literature mainly from 2018 onwards and considering the effects of nanoplastics on ecosystems, their uptake and transport of polluting molecules, and the challenges that are faced by workers in this area. The review includes 119 references.

Ammonia (NH₃) emissions, the majority of which arise from livestock production, are linked to high concentration of PM₂.₅ and lower air quality in China. NH₃ mitigation options were well studied at the small-scale (laboratory or pilot), however, they lack of a large-scale test in China. This study fills this crucial gap by evaluating the cost-benefit of pioneering NH₃ mitigation projects carried out for a whole county – Sheyang, Jiangsu province, China. Measures were implemented in 2019 following two distinct strategies, improved manure treatment for industrial livestock farms, and collection and central treatment for traditional livestock farms. Emission reductions of 16% were achieved in a short time. While this is remarkable, it falls short of expectations from small-scale studies. If measures were fully implemented according to purpose and meet expectations from the small scale, higher emission reductions of 42% would be possible. The cost benefit analysis presented in this study demonstrated advantages of central manure treatment over in-farm facilities. With improved implementation of mitigation strategies in industrial livestock farms, traditional livestock farms may play an increasing role in total NH₃ emissions, which means such farms either need to be included in future NH₃ mitigation policies or gradually replaced by industrial livestock farms.The study found an agricultural NH₃ reduction technology route suitable for China's national conditions (such as the “Sheyang Model”).

Japan receives nitrogenous air pollutants via long-range transport from China. However, emissions of nitrogenous air pollutants in China have stabilized or decreased in recent years. This study examined both the long-term trends in atmospheric nitrogen (N) deposition from the 1990s to the 2010s and the response of stream water nitrate (NO₃⁻) leaching from forested areas in western Japan. A long-term (1992–2018) temporal analysis of atmospheric N deposition in Fukuoka (western Japan) was conducted. Atmospheric bulk N deposition was collected at forested sites in a suburban forest (Swₑₛₜ) and a rural forest (Rwₑₛₜ) in western Japan during 2009–2018. Stream water samples were also collected from four locations at sites Swₑₛₜ and Rwₑₛₜ during the same period. Results showed that atmospheric N deposition in Fukuoka started to decrease from the mid-2000s at an annual rate of −2.5% yr⁻¹. The decrease in atmospheric N deposition was attributable mainly to decreased atmospheric ammonium (NH₄⁺) deposition, which caused greater contribution of NO₃⁻ deposition to atmospheric N deposition. Concentrations of NO₃⁻ in the stream water samples from three of the four locations decreased significantly at an annual rate of −3.7 to −0.7% yr⁻¹. However, stream water NO₃⁻ concentrations increased in one watershed where understory vegetation has been deteriorating owing to the increased deer population. This might weaken the recovery of N leaching from forested areas.

Source apportionment can be an effective tool in mitigating soil pollution but its efficacy is often limited by a lack of information on the factors that influence the accumulation of pollutants at a site. In response to this limitation and focusing on a suite of heavy metals identified as priorities for pollution control, the study established a comprehensive pollution control framework using factor identification coupled with spatial agglomeration for agricultural soils in an industrialized part of Zhejiang Province, China. In addition to elucidating the key role of industrial and traffic activities on heavy metal accumulation through implementing a receptor model, specific influencing factors were identified using a random forest model. The distance from the soil sample location to the nearest likely industrial source was the most important factor in determining cadmium and copper concentrations, while distance to the nearest road was more important for lead and zinc pollution. Soil parent materials, pH, organic matter, and clay particle size were the key factors influencing accumulation of arsenic, chromium, and nickel. Spatial auto-correlation between levels of soil metal pollution and industrial agglomeration can enable a more targeted approach to pollution control measures. Overall, the approach and results provide a basis for improved accuracy in source apportionment, and thus improved soil pollution control, at the regional scale.

Mean oceanic CO₂ values have already risen and are expected to rise further on a global scale. Elevated pCO₂ (eCO₂) changes the bacterial community in seawater. However, the ecological association of seawater microbiota and related geochemical functions are largely unknown. We provide the first evidence that eCO₂ alters the interaction patterns and functional potentials of microbiota in rearing seawater of the swimming crab, Portunus trituberculatus. Network analysis showed that eCO₂ induced a simpler and more modular bacterial network in rearing seawater, with increased negative associations and distinct keystone taxa. Using the quantitative microbial element cycling method, nitrogen (N) and phosphorus (P) cycling genes exhibited the highest increase after one week of eCO₂ stress and were significantly associated with keystone taxa. However, the functional potential of seawater bacteria was decoupled from their taxonomic composition and strongly coupled with eCO₂ levels. The changed functional potential of seawater bacteria contributed to seawater N and P chemistry, which was highlighted by markedly decreased NH₃, NH₄⁺-N, and PO₄³⁻-P levels and increased NO₂⁻-N and NO₃⁻-N levels. This study suggests that eCO₂ alters the interaction patterns and functional potentials of seawater microbiota, which lead to the changes of seawater chemical parameters. Our findings provide new insights into the mechanisms underlying the effects of eCO₂ on marine animals from the microbial ecological perspective.

Cadmium (Cd), as an environmental pollutant, can lead to nephrotoxicity. However, its nephrotoxicological mechanisms have not been fully elucidated. In this study, Cd (1.5 mg/kg body weight, gavaged for 4 weeks) was found to induce the renal damage in mice, based on indicators including Cd concentration, kidney index, serum creatinine and blood urea nitrogen levels, pro-inflammatory cytokines and their mRNA expressions, levels of Bcl-2, Bax and caspase9, and histopathological changes of the kidneys. Furthermore, Cd-caused detrimental changes through inducing inflammation and apoptosis via the miR-34a/Sirt1/p53 axis. This is the first report on the role of miR-34a/Sirt1/p53 axis in regulating Cd-caused apoptosis and nephrotoxicity in mice. The findings obtained in this study provide new insights into miRNA-based regulation of heavy metal induced-nephrotoxicity.

Air pollution caused by PM₂.₅ particles is a critical issue for public health that adversely affects people living in urban cities. Short-term Mega-events such as international meetings, sports tournaments, and traditional festivals can profoundly influence the local air quality. However, the extent of these influences and their role in improving or deteriorating the local air quality is still unclear. By collecting relative research from 75 publications based on more than 37 cities worldwide, we conducted a systematic review and meta-analysis. We calculated the log response ratio (RR) of the treatment (during) and control periods (before and after) of the Mega-events. The short-term policy control measures enacted during the Mega-Events consisting of meetings caused a significant decline (by −44.06%) in the ambient PM₂.₅ concentration. The mean daily PM₂.₅ concentration reduced from more than 100.00 μg/m³ before the events to 60.39 μg/m³, which is below the WHO (World Health Organization) interim target – 1 (75 μg/m³). On the contrary, setting off fireworks during the festival increased the ambient PM₂.₅ concentrations by 89.57% on average, with a mean daily value of 254.22 μg/m³. The variations in the effects of all event types on the air quality were primarily influenced by the background PM₂.₅ concentrations, with a negative correlation throughout. Moreover, the impact of events with policy control measures was also influenced by the year of the event, level of control, and location (suburban/urban) of the monitoring sites. Our findings provide evidence of the potential of human intervention on PM₂.₅ pollution reduction. We further highlight the crucial role of background pollution level in implementing policies during the Mega-events, which can benefit the environmental governance of developing countries.

Deca-brominated diphenyl ether (BDE-209) is shown to be persistent in soil and it's urgent to find an effective method to remove BDE-209 from contaminated soil. In this study, the investigation of BDE-209 degradation in three different rice-vegetable rotation soils induced by electron beam (E-beam) irradiation under flooded and non-flooded conditions was conducted. The reductive efficiency of ¹⁴C-BDE209 reached the highest level at 50 kGy and the values in flooded soils of rice-eggplant rotation soil (RES), rice-peanut soil (RPS), and rice-chili pepper soil (RCS) were 93.5%, 87.2%, and 73.8%, respectively. The reductive efficiencies in non-flooded soils of RES, RPS, and RCS were 73.4%, 81.0%, and 78%, respectively. The D₀.₅ values (dose required for reducing 50% BDE-209) of BDE-209 in non-flooded soils were lower than those in flooded soils, suggesting greater degradation efficiency of BDE-209 in non-flooded soils than in flooded soils. The BDE-209 was degraded into higher-brominated PBDEs and lower-brominated PBDEs by E-beam irradiation. The results demonstrate that BDE-209 in the soil can be degraded by E-beam irradiation, non-flooded condition is better than flooded condition for the removal of BDE-209, and the main degradation mechanism of BDE-209 by E-beam irradiation is debromination. This study provides a rapid and effective method for degrading BDE-209 that is persistent in soils, and has important implications for the remediation of soil contaminated by PBDEs in and around E-waste dismantling areas.