This study investigated relationships between organohalogen compound (OHC) exposure, feeding habits, and pathogen exposure in a recovering population of Atlantic walruses (Odobenus rosmarus rosmarus) from the Svalbard Archipelago, Norway. Various samples were collected from 39 free-living, apparently healthy, adult male walruses immobilised at three sampling locations during the summers of 2014 and 2015. Concentrations of lipophilic compounds (polychlorinated biphenyls, organochlorine pesticides and polybrominated diphenyl ethers) were analysed in blubber samples, and concentrations of perfluoroalkylated substances (PFASs) were determined in plasma samples. Stable isotopes of carbon and nitrogen were measured in seven tissue types and surveys for three infectious pathogens were conducted. Despite an overall decline in lipophilic compound concentrations since this population was last studied (2006), the contaminant pattern was similar, including extremely large inter-individual variation. Stable isotope ratios of carbon and nitrogen showed that the variation in OHC concentrations could not be explained by some walruses consuming higher trophic level diets, since all animals were found to feed at a similar trophic level. Antibodies against the bacteria Brucella spp. and the parasite Toxoplasma gondii were detected in 26% and 15% of the walruses, respectively. Given the absence of seal-predation, T. gondii exposure likely took place via the consumption of contaminated bivalves. The source of exposure to Brucella spp. in walruses is still unknown. Parapoxvirus DNA was detected in a single individual, representing the first documented evidence of parapoxvirus in wild walruses. Antibody prevalence was not related to contaminant exposure. Despite this, dynamic relationships between diet composition, contaminant bioaccumulation and pathogen exposure warrant continuing attention given the likelihood of climate change induced habitat and food web changes, and consequently OHC exposure, for Svalbard walruses in the coming decades.

Thermal desorption (TD) is a universal solvent-free pre-concentration technique. It is often used to pre-concentrate semi-volatile and volatile organic compounds in various sample types. Polycyclic aromatic hydrocarbons (PAHs) are widespread contaminants from incomplete combustion of organic matter and fossil fuel, which have carcinogenic effects on human health. Conventional methods for determining PAHs, represented by solvent extraction, are gradually being replaced by solvent-free methods, typically the TD technique, because of TD's many advantages, including time savings and environmentally friendly treatment. This work presents an extensive review of the universal methods used to determine PAHs in the atmosphere based on the TD technique. The methods currently used for collection and detection of both gas- and particle-phase PAHs in the air are critically reviewed. In addition, the operating parameters of the TD unit are summarized and discussed. The design shortcomings of existing studies and the problems that researchers should address are presented, and promising alternatives are suggested. This paper also discusses important parameters, such as reproducibility and limit of detection, that form a crucial part of quality assurance. Finally, the limitations and the future prospects of the TD technique for use in airborne PAH analyses are addressed. This is the first review of the latest developments of the TD technique for analysis of PAHs and their derivatives in the atmosphere.

Biological tests with plant seeds have been adopted in many studies to investigate the phytotoxicity of pollutants to facilitate the control of risks and remain to be optimized. In this work, the experiment with a small sample size (Experiment 1) and the experiment with a large one (Experiment 2) were designed to study the effect of tetracycline (TC) on Chinese cabbage (Brassica rapa L.) at seed germination and radicle elongation stages. At the former stage, germination number data were obtained to analyze the germination energy (GE) and to judge the probability of the number of germinated seeds (Pₙ) by the binomial distribution model in Experiment 1. While germination time-to-number data were obtained to analyze the mean time to germination (MGT), the estimate of mean time to germination (EMGT) by survival analysis method, the time to germination for 50% of total seeds (T₅₀) and the germination rate (GR) besides GE in Experiment 2. At the latter stage, the data of radicle length (RL) were obtained in all the experiments and the influence from the former stage on this stage was excluded in Experiment 2 but not in Experiment 1. Results showed that TC had universal adverse effects on the latter stage but not on the former stage in the experiments. Considering the availability of germination data for statistical analysis and the robustness of RL data, the methods adopted in Experiment 2 were more feasible than those in Experiment 1. In addition, Chinese cabbage seeds with medium size have the character of rapid germination compared with the commonly used crop species and can be used to shorten the experimental cycle to study the responses of seeds to pollutants to evaluate the phytotoxicity.We introduced survival analysis method to analyze the germination time-to-number data obtained in seed germination test to evaluate the phytotoxicity of tetracycline.

Sustainable alternatives to landfill disposal for municipal mixed wastes represents a major challenge to governments and waste management industries. In the state of New South Wales (NSW) Australia, mechanical biological treatment (MBT) is being used to reduce the volume and pathogen content of organic matter isolated from municipal waste. The product of this treatment, a compost-like output (CLO) referred to as mixed waste organic output (MWOO), is being recycled and applied as a soil amendment. However, the presence of contaminants in MWOO including trace organics, trace metals and physical contaminants such as microplastic fragments has raised concerns about potential negative effects on soil health and agriculture following land application. Here, we used multiple lines of evidence to examine the effects of land application of MWOO containing microplastics in three soils to a variety of terrestrial biota. Treatments included unamended soil, MWOO-amended soil and MWOO-amended soil into which additional high-density polyethylene (HDPE), polyethylene terephthalate (PET), or polyvinyl chloride (PVC) microplastics were added. Tests were conducted in soil media that had been incubated for 0, 3 or 9 months. Addition of microplastics had no significant negative effect on wheat seedling emergence, wheat biomass production, earthworm growth, mortality or avoidance behaviour and nematode mortality or reproduction compared to controls. There was also little evidence the microplastics affected microbial community diversity, although measurements of microbial community structure were highly variable with no clear trends.

Severe pollution caused by atmospheric particulate matter (PM) has become a global environmental issue. Samples of atmospheric PM were collected before and during the Chinese Spring Festival in Xiamen, a coastal city in Southeast China, to investigate their chemical characteristics, sources, and formation mechanisms. The results indicated that PM₂.₅ mass concentrations comprised 53.60% and 56.31% of total suspended particulates before and during the Spring Festival, respectively. Due to the halt of factory production and construction and the reduction of vehicle flow during the Spring Festival, the concentrations of organic carbon, elemental carbon and water soluble ions in PM₂.₅ decreased by 78.56%, 84.19% and 27.53%, respectively, compared with those before the Spring Festival. However, the concentrations of K⁺, Mg²⁺, Al, Sr, and Ba increased by 3121.76%, 571.67%, 183.71%, 180.15%, and 137.58%, respectively, resulting from the display of fireworks and firecrackers during the Spring Festival. Analysis of backward air mass trajectory indicated that the concentrations of PM₂.₅ and its components were dominated by local pollution sources before and during the Spring Festival. The relationships between meteorological conditions and pollutant concentrations showed that the secondary organic aerosol was generated from the heterogeneous reaction before the Spring Festival, and the secondary inorganic aerosol was formed by the photochemical reaction during the Spring Festival.

Graphene oxide (GO) has been demonstrated to be key component for diverse applications. However, their potential environmental reactivity, fate and risk have not been fully evaluated to date. In this study, we investigated the photochemical reactivity of four types of GO with different oxidation degrees in aqueous environment, and their related toxicity to two bacterial models Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was further compared. After UV-irradiation, a large amount of oxygen functional groups on GO were reduced and the electronic conjugations within GO were restored as indicated by UV–visible absorption spectra, X-ray photoelectron spectroscopy and Raman spectroscopy analysis. Moreover, the higher the oxidation degree of the pristine GO was, the more obvious of the photo-transformation changes were. In order to further reveal the photochemical reactivity mechanisms, the reactive oxygen species (ROS) generation of GO was monitored. The quantity of ROS including singlet oxygen (1O2), superoxide anions (O2·-), and hydroxyl radicals (·OH) increased with increasing oxidation degree of GO, which was in accordance with the previous characterization results. Scanning electron microscopy and cell growth analyses of E. coli and S. aureus showed that the photochemical transformation enhanced the toxicity of GO, which might be due to an increase in functional group density. The higher conductivity of the reduced graphene oxide (RGO) was responsible for its stronger toxicity than GO through membrane damage and oxidative stress to bacteria. This study revealed that the oxidation degrees play important roles in photochemical transformation and the resulting toxicity of GO, which is helpful for understanding the environmental behaviors and risks of GO in aquatic environments.

We assessed factory-calibrated field-portable X-ray fluorescence (pXRF) data quality for use with minimally-prepared aquatic sediments, including the precision of replicate pXRF measurements, accuracy of factory-calibrated pXRF values as compared to total digestion/ICP-OES concentrations, and comparability of calibrated pXRF values to extractable concentrations. Data quality levels for precision, accuracy, and comparability were not equivalent for element/analyzer combinations. All analyses of elements that were assessed for precision and accuracy on a single analyzer were both precise (<10% relative standard deviation) and accurate (r2 > 0.85) for K, Ca, Ti, Mn, Fe, and Zn. Calibrated pXRF values for Al, K, Ca, Ti, Mn, Fe, Cu, Zn, and Pb were within ∼10% relative difference of total digestion/ICP-OES concentrations. Calibrated pXRF values for Fe, Cu, Zn, As, and Pb were within ∼20% relative difference of extractable concentrations. Some elements had a higher level of data quality using specific analyzers, but in general, no pXRF analyzer had the highest level of data quality in all categories. Collectively, our data indicate that a wide range of factory-calibrated pXRF units are capable of providing high-quality total concentrations for the analysis of aquatic sediments.

Permeable reactive bio-barriers (Bio-PRBs) are a new and developing technique for in situ remediation of groundwater contamination. Some remediation technologies have often been impeded by insufficient understanding of contaminant transport and transformation in the subsurface environment. Therefore, advanced knowledge in contaminant transport and reactions in Bio-PRBs will be crucial to the successful practical application of this technique. A two-dimensional reaction model C1 was developed for predicting the multi-path chain kinetic reaction of 1,1,1-trichloroethane (1,1,1-TCA) in Bio-PRBs. This study demonstrates that model C1 is able to predict the 1,1,1-TCA breakthrough time and rapidly evaluate the Bio-PRBs retardation performance. The results show that microbial growth and immobilization are the key factors that affect the retardation and remediation performance of Bio-PRBs. The free growth of microorganisms had significant negative effects on hydraulic conductivity (K) in the zero-valent iron (ZVI) region of free microorganism Bio-PRBs (FM-PRBs). The total head loss in the FM-PRB was 9.0 cm, which was significantly greater than the head loss (6.5 cm) of immobilized microorganism Bio-PRBs (IM-PRBs). Compared to ZVI-PRBs and FM-PRBs, the numerical simulation results reveal that microbial immobilization significantly improves the remediation performance of IM-PRBs by 550.9% and 32.7%, respectively. The dual effect of microorganisms leads to significant differences in the 1,1,1-TCA and daughter products (1,1-dichloroethane, 1,1-dichloroethene, chloroethane and vinyl chloride) contaminant-plume evolution between FM-PRBs and IM-PRBs. In addition, model C1 can be utilized to design standard Bio-PRBs for real site of 1,1,1-TCA contanminated groundwater. To meet the safety standard of groundwater as potable water, the width of IM-PRBs needs to be increased by 24 cm. However, in FM-PRBs, the width needs to be increased by 42 cm. Therefore, IM-PRBs save costs significantly. This work has successfully used a model to optimize Bio-PRBs and to predict 1,1,1-TCA and daughter products contaminant-plume evolution in different Bio-PRBs.

For the soil-plant ecosystem, knowledge about the effects of biochars on the soil silicon (Si) cycle is still tenuous. In this study, the effect of biochars on the yield, Si uptake and Si distribution within different tissues of rice plants and the soil Si cycles in a soil-plant system were investigated. Si-rich (RH300-700) and Si-deficient (WB300-700) biochars prepared from rice husk and wood sawdust were applied to high-Si soil (HSS) and low-Si soil (LSS). Biochar addition increased the yield of grain and straw and had no effect on the yield of root, and the increase in the yield with Si-rich biochars was obvious; this effect had a high response to LSS. Si-rich biochars increased the plant Si content of grain and root and had no effect on straw. RH300 amendment increased the Si concentration in grains, compared to RH500 and RH700. The addition of Si-deficient biochar to HSS had little effect on the Si content, while Si-deficient biochar-amended LSS had a great impact on the reduced Si content in rice straw and root, and WB700 decreased the Si concentration in grains, compared to WB300 and WB500. Finally, the Si-rich biochars increased the total Si uptake within rice, while Si-deficient biochars decreased the total Si uptake in LSS. According to the FTIR and SEM-EDX spectra of biochars before and after rice harvest, a new band of SiOSi at 471 cm⁻¹ was found after aged WB700, and the minerals of iron and Si were found on the surface of aged WB700; biochars can fix the dissolved Si on its surface as a temporary store to prevent Si loss. Therefore, biochars can be considered reservoirs of soil Si, which is a slow release source of available Si, to impact the speed of biogeochemical cycling of soil Si in agricultural paddy soil.

Concentrations of unsubstituted and methylated polycyclic aromatic hydrocarbons (PAHs and Me-PAHs) were examined in road dusts from some representative areas with different land-use types in northern Vietnam, providing updated information about the occurrence, sources, and risks of these pollutants in Southeast Asian region. The Vietnamese road dusts were contaminated with low to moderate levels of PAHs and Me-PAHs as compared to those from other countries in the world. Concentrations of PAHs and Me-PAHs (Σ34PAHs) decreased in the order: urban (median 1800; range 1100–5500) ≈ industrial (1300; 550–10,000) > suburban (450; 310–1300) ≈ rural road dust (330; 210–2300 ng g⁻¹), suggesting an urban-rural declining trend and effects of urbanization-industrialization processes in PAH emission extent in Vietnam. The profiles and diagnostic ratios of PAHs and Me-PAHs in our samples revealed that these compounds were mainly derived from pyrogenic sources rather than petrogenic sources. Traffic emissions (e.g., vehicle exhaust, tire debris, and possible leaks of fuels, oils, and lubricants) were estimated as principal sources of PAHs and Me-PAHs, especially in the urban and industrial areas. Other pyrogenic sources (e.g., coal, wood, and biomass combustion) were also existed in the industrial, suburban, and rural areas, reflecting PAH origins from thermal industrial processes, open burning of agricultural by-products, and domestic energy utilization. Persons working outdoors and children in the urban and industrial areas were estimated to receive higher intake doses of PAHs and Me-PAHs, which were one to two orders of magnitude higher than those estimated for other groups. Except for potential cancer risk estimated for the occupational groups in the industrial area under the worst exposure scenarios, the non-cancer and cancer risk levels were generally acceptable; however, more comprehensive risk assessment considering other exposure pathways (e.g., inhalation and diet) is needed.