In the present study, polyethylene (PE) microplastics (150–300 μm) were added to Atlantic cod (Gadus morhua) feeds at 1 %, either in their present form (Virgin PE) or spiked with PCB-126 (Spiked PE). The feeds were given to juvenile cod for a 4-week period. The fish grew from 11 to 23 g with no significant difference between dietary treatments. Cod fed spiked PE showed a significantly higher concentration of PCB-126 in liver and muscle samples compared to control and fish ingesting virgin PE. In accordance with the accumulation of PCB-126 in the liver, the expression of hepatic cyp1a was higher in cod fed spiked PE. Notably, we observed that spiked PE, as well as virgin PE, have an effect on skin. Overall changes indicated a reduced skin barrier in fish fed a diet containing PE. Indicating that PE itself through interaction with gut tissue may influence skin health in fish. | publishedVersion

Phthalates are used in plastics, found throughout the marine environment and have the potential to cause adverse health effects. In the present study, we quantified blubber concentrations of 11 phthalates in 16 samples from stranded and/or free-living marine mammals from the Norwegian coast: the killer whale (Orcinus orca), sperm whale (Physeter macrocephalus), long-finned pilot whale (Globicephala melas), white-beaked dolphin (Lagenorhynchus albirostris), harbour porpoise (Phocoena phocoena), and harbour seal (Phoca vitulina). Five compounds were detected across all samples: benzyl butyl phthalate (BBP; in 50 % of samples), bis(2-ethylhexyl) phthalate (DEHP; 33 %), diisononyl phthalate (DiNP; 33 %), diisobutyl phthalate (DiBP; 19 %), and dioctyl phthalate (DOP; 13 %). Overall, the most contaminated individual was the white-beaked dolphin, whilst the lowest concentrations were measured in the killer whale, sperm whale and long-finned pilot whale. We found no phthalates in the neonate killer whale. The present study is important for future monitoring and management of these toxic compounds. | publishedVersion

Arctic rivers are receiving increased attention for their contributing of mercury (Hg) to the Arctic Ocean. Despite this, the knowledge on both the terrestrial release sources and the levels of Hg in the rivers are limited. Within the Arctic, the Barents region has a high industrial development, including multiple potential Hg release sources. This study presents the first overview of potential Hg release sources on Norwegian and Russian mainland draining to the Barents Sea. Source categories cover mining and metallurgy industry; historical pulp and paper production; municipal and industrial solid waste handling; fossil fuel combustion; and past military activities. Available data on Hg in freshwater bodies near the identified potential release sources are reviewed. Levels of Hg were occasionally exceeding the national pollution control limits, thereby posing concern to the local human population and wildlife. However, the studies were sparse and often unsystematic. Finally, we present new data of Hg measured in five Barents rivers. These data reveal strong seasonality in the Hg levels, with a total annual flux constituting 2% of the panarctic total. With this new insight we aspire to contribute to the international efforts of reducing Hg pollution, such as through the effective implementation of the Minamata Convention. Future studies documenting Hg in exposed Barents freshwater bodies are warranted. | publishedVersion

For monitoring microplastic contamination in fish tissues, tissue digestion into filterable components prior to microplastic identification and quantification should be quick and efficient, providing satisfying microplastic recoveries of relevant particle sizes. Filtration with a small pore size, necessary to target small particles, is a challenge. Some proposed protocols take several days. To improve this, a combination of surfactants (Tween®-20 and Triton™ X-100) with potassium hydroxide (KOH) and pH neutralization was used. Fish bones were removed in tissue preparation prior to digestion. Recovery down to ca. 60–80 μm worked well for PA-66, PE, PET, PP, PS and PVC. In conclusion, we developed a comparatively swift digestion protocol, enabling filtration of 100 g samples with a pore size of 10 μm, for fish fillets with high (mackerel), intermediate (salmon, plaice) and low (cod) fat contents, fish liver, head kidney and oil samples, within 16–24 h. | publishedVersion

In the coming years, the use of microalgal biomass as agricultural biofertilizers has shown promising results. The use of wastewater as culture medium has resulted in the reduction of production costs, making microalgae-based fertilizers highly attractive for farmers. However, the occurrence of specific pollutants in wastewater, like pathogens, heavy metals and contaminants of emerging concern (CECs), such as pharmaceuticals and personal care products may pose a risk on human health. This study presents an holistic assessment of the production and use of microalgal biomass grown in municipal wastewater as biofertilizer in agriculture. Results showed that pathogens and heavy metals concentrations in the microalgal biomass were below the threshold established by the European regulation for fertilizing products, except for cadmium. Regarding CECs, 25 out of 29 compounds were found in wastewater. However, only three of them (hydrocinnamic acid, caffeine, and bisphenol A) were found in the microalgae biomass used as biofertilizer. Agronomic tests were performed for lettuce growth in greenhouse. Four treatments were studied, comparing the use of microalgae biofertilizer with a conventional mineral fertilizer, and also a combination of both of them. Results suggested that microalgae can help reducing the mineral nitrogen dose, since similar fresh shoot weights were obtained in the plants grown with the different assessed fertilizers. Lettuce samples revealed the presence of cadmium and CECs in all the treatments including both negative and positive controls, which suggests that their presence was not linked to the microalgae biomass. On the whole, this study revealed that wastewater grown microalgae can be used for agricultural purposes reducing mineral N need and guaranteeing health safety of the crops. | This research was supported by the European Commission (FERTILWASTES-EFA307/19) and the Spanish Ministry of Science and Innovation (CYRCLE-PID2020-113866RA-I00). E. Uggetti and R. Díez- Montero would like to thank the Spanish Ministry of Industry and Economy for their research grants [RYC2018-025514-I and ICJ2019- 042069-I, respectively]. A. Álvarez-González kindly acknowledge the Departament de Recerca i Universitats de la Generalitat de Catalunya for her PhD scholarship (FI AGAUR, 2022FI_B 00488). E. Gonzalez-Flo would like to thank the European Union-NextGenerationEU, Ministryof Universities and Recovery, Transformation and Resilience Plan for her research grant (2021UPF-MS-12). M. Escolà Casas wants to thank the Beatriu de Pinós 2018 grant-programme (MSCA grant agreement number 801370) for the funding.

Marine pollution by lost, abandoned or otherwise discarded fishing gear (ALDFG) often has negative impact on the ecosystem through plastic pollution and continuous capture of marine animals, so-called “ghost fishing”. ALDFG in pot fisheries is associated with high ghost fishing risk. The snow crab (Chionoecetes opilio) pot fishery is conducted in harsh weather conditions increasing the risk of fishing gear loss. Due to plastic materials used in the pot construction, lost gear can most likely continue fishing for decades. This study presents a method to quantify ghost fishing efficiency relative to catch efficiency of actively fished pots. On average, the ghost fishing pots captured 8.29 % (confidence intervals: 4.33–13.73 %) target-sized snow crab compared to the actively fished pots, demonstrating that lost pots can continue fishing even when the bait is decayed. Given the large number of pots lost each year, the ghost fishing efficiency is a considerable challenge in this fishery. | publishedVersion

While long-term organic fertilizer (OF) applications tend to decrease copper (Cu) and zinc (Zn) availability in agricultural soils, earthworm bioturbation has been reported to have the opposite effect. Thus, the consequences of OF amendments in earthworm-inhabited soils on Cu and Zn bioavailability to earthworms are still under debate. Here, we assessed the effect of a decade of agronomically realistic OF applications on Cu and Zn availability in earthworm-inhabited soils and the consequences on Cu and Zn bioavailability to earthworms. An epi-endogeic species (Dichogaster saliens) was exposed in microcosms to three field-collected soils that had received either no, mineral, or organic fertilization for a decade. Dissolved organic matter (DOM) properties (i.e., concentration, aromaticity, and binding properties toward Cu), pH, and Cu and Zn availability (i.e., total concentration and free ionic activity) were determined in the solution of the soil containing earthworms. Cu and Zn bioavailability was assessed by measuring the net accumulation (ng) and concentration of Cu and Zn in earthworms (mg kg−1). Despite soil Cu and Zn contamination induced by a decade of OF applications, organic fertilization induced an increase in soil pH and DOM properties that drove the reduction of Cu and Zn availability in earthworm-inhabited soils, while bioturbation had little effect on soil pH, DOM properties, and Cu and Zn availability. Consistently, Cu and Zn bioavailability to earthworms did not increase with OF applications. From an ecotoxicological perspective, our results suggest that agronomically realistic applications of OF for a decade should not pose a risk to earthworms in terms of Cu and Zn net accumulation, but further studies have to be undertaken to understand consequent long-term toxicity after exposure.

Microalgae and blue mussels are known to accumulate undesirable substances from the environment, including arsenic (As). Microalgae can biotransform inorganic As (iAs) to organoarsenic species, which can be transferred to blue mussels. Knowledge on As uptake, biotransformation, and trophic transfer is important with regards to feed and food safety since As species have varying toxicities. In the current work, experiments were conducted in two parts: (1) exposure of the microalgae Diacronema lutheri to 5 and 10 μg/L As(V) in seawater for 4 days, and (2) dietary As exposure where blue mussels (Mytilus edulis L.) were fed with D. lutheri exposed to 5 and 10 μg/L As(V), or by aquatic exposure to 5 μg/L As(V) in seawater, for a total of 25 days. The results showed that D. lutheri can take up As from seawater and transform it to methylated As species and arsenosugars (AsSug). However, exposure to 10 μg/L As(V) resulted in accumulation of iAs in D. lutheri and lower production of methylated As species, which may suggest that detoxification mechanisms were overwhelmed. Blue mussels exposed to As via the diet and seawater showed no accumulation of As. Use of linear mixed models revealed that the blue mussels were gradually losing As instead, which may be due to As concentration differences in the mussels’ natural environment and the experimental setup. Both D. lutheri and blue mussels contained notable proportions of simple methylated As species and AsSug. Arsenobetaine (AB) was not detected in D. lutheri but present in minor fraction in mussels. The findings suggest that low-trophic marine organisms mainly contain methylated As species and AsSug. The use of low-trophic marine organisms as feed ingredients requires further studies since AsSug are regarded as potentially toxic, which may introduce new risks to feed and food safety. | publishedVersion

Gillnets are among the most common fishing gears worldwide. They are often made of thin twine, which is prone to wear and tear, limiting the lifespan of the gillnet. This increases gillnet turnover, and consequently increased risk of gear discarding, gear loss, ghost fishing and marine pollution. This might be mitigated by increasing twine thickness, and thereby breaking strength. However, the tolerable increase in thickness for gillnet durability without compromising the catch efficiency is unknown. Therefore, this study conducted gillnet fishing trials under commercial conditions in the Northeast-Arctic cod gillnet fishery analysing and comparing ways of capture and efficiency between gillnets with two different twine thicknesses for two different mesh sizes. The results demonstrated that a 30 % increase in breaking strength and twine stiffness did not affect catch performance. Therefore, thicker gillnet twine can potentially reduce marine litter by plastic debris from damaged and lost gears without compromising catch performance. | publishedVersion

Plastic debris is a significant threat to marine and coastal ecosystems. Previous research found that waves, wind, as well as density, size, and shape of microplastics, drive their transport and dispersion. In this paper, a set of laboratory experiments on the effect of waves and wave-induced currents on the input rate and cross-shore transport and dispersion of different types of plastic debris, including the macro and mesosizes, in addition to microplastics is presented. 15 plastic-debris types characterized by different sizes, shapes, and densities, including facemasks, were analyzed under regular and irregular wave conditions. The results show that input and transport rates of plastics depend on their terminal velocities and wave steepness. Plastics with higher settling velocities under less-steep wave conditions are likely to escape coastal entrapment and end up in the breaking zone. However, plastics with greater buoyancy rates under steeper waves show a predominant accumulation closer to the shoreline. | P.N. is supported by a Margarita Salas post-doctoral fellowship funded by 638 European Union-NextGenerationEU,Ministry of Universities and Recovery Trans639 formation and Resilience Plan, through a call fromthe University of Cantabria. The 640 financial support from the Government of Cantabria through the FÉNIX Program 641 (ID 2020.03.03.322B.742.09) is warmly acknowledged. We acknowledge M.S. and the IHLab-Hydro team for all the technical support.