The distribution of polycyclic aromatic hydrocarbons (PAHs) in the surface water and sediments in five regions of the Indian Sundarbans was assessed. The capability of microbial biofilm communities to sequester PAHs in a biofilm-promoting vessel was evaluated. The total PAH concentration of water and sediments ranged from undetectable to 125 ng ml⁻¹ and 4880 to 2 × 10⁴ ng g⁻¹ dry weight respectively. The total PAHs concentration of sediments exceeded the Effects Range–Low value and the recommended Effects Range-Median values, implying the PAHs might adversely affect the biota of the Sundarbans. Pyrogenic and petrogenic sources of PAH contamination were identified in most of the sampling sites. Indigenous biofilms were cultivated in a patented biofilm-promoting culture vessel containing liquid media spiked with 16 priority PAHs. Biofilm-mediated 97–100% removal efficiency of 16 PAHs was attained in all media. There was no significant difference between the mean residual PAH from the liquid media collected from hydrophobic and hydrophilic flasks. Residual amounts of acenaphthene (Ace), anthracene (Ant), benzo(b)fluoranthene [B(b)F], benzo(a)pyrene [B(a)P] and benzo(g,h,i)perylene [B(g,h,i)P] showed differences when cultivated in hydrophobic and hydrophilic flasks. The mean residual amounts of total PAHs extracted from biofilm biomasses were variable. A biofilm obtained from a specific sampling site cultured in the hydrophobic flask showed higher PAH sequestration when compared to the removal attained in the hydrophilic flask. Relative abundances of different microbial communities in PAH-sequestering biofilms revealed bacterial phyla including Proteobacteria, Bacteroidetes, Firmicutes, Actinobacteria, Chloroflexi and Planctomycetes as well as members of Ascomycota phylum of fungi. The dominance of Candida tropicalis, Clostridium butyricum, Sphingobacterium multivorum and Paecilomyces fulvus were established.

Marine diatoms have been identified among the most abundant taxa of microorganisms associated with plastic waste collected at sea. However, the impact of nano-sized plastic fragments (nanoplastics) at single cell and population level is almost unknown. We exposed the marine diatom Skeletonema marinoi to model polystyrene nanoparticles with carboxylic acid groups (PS–COOH NPs, 90 nm) for 15 days (1, 10, 50 μg/mL). Growth, reactive oxygen species (ROS) production, and nano-bio-interactions were investigated. No effect on diatom growth was observed, however Dynamic light scattering (DLS) demonstrated the formation of large PS aggregates which were localized at the diatoms’ fultoportula process (FPP), as shown by TEM images. Increase production of ROS and reduction in chain length were also observed upon PS NPs exposure (p < 0.005). The observed PS-diatom interaction could have serious consequences on diatoms ecological role on the biogeochemical cycle of carbon, by impairing the formation of fast-sinking aggregates responsible for atmospheric carbon fixation and sequestration in the ocean sea floor.S. marinoi exposure to PS NPs caused an increase of intracellular and extracellular oxidative stress, the reduction of diatom’s chain length and the adhesion of PS NPs onto the algal surface.

Current understanding on the fate and behavior of microplastics (MPs) in complex soil media remains inadequate. We characterized the aging and hetero-aggregation of a MP sampled in farmland soil, and explored its vertical downward transport in natural loamy sand. The MP was identified with FTIR spectrum as polypropylene, a plastic lighter than water. FTIR spectrum combined with SEM imaging confirmed the MP was highly aged, generating colloidal plastic fibers and carbonyl groups. SEM imaging coupled with EDX analysis suggested hetero-aggregation of the MP with soil minerals. Soil leaching tests performed with the clean MP (without soil minerals) (CMP), the raw MP (RMP) (with soil minerals), and the RMP with humic acid (HA) (RMP + HA) demonstrated that the mobility was insignificant for the CMP, moderate for the RMP and highest for the RMP + HA, resulting in a maximal downward traveling distance of 0 cm, 3–4 cm, and 9–10 cm, respectively. Correlation between the maximal traveling distance and zeta potential of the CMP, RMP, and RMP + HA confirmed surface charge as a dominant control on the MP mobility; while the increasing density of the MP, due to hetero-aggregation with soil minerals, was identified as a driving mechanism for its downward transport, despite its intrinsic density lower than water. Occurrence of only the lower-sized rod-shaped plastic fibers at the maximal traveling distance suggested the natural aging, a process leading to plastic vibration and fragmentation, was conducive to plastic translocation. The three explored classes of antibiotic resistance genes (ARGs) (tetracycline, beta-lactam and sulfonamide) were all detected in the plastic surface, suggesting the MP may function as a potential pathway for the dissemination of ARGs to the deeper soil layer. These findings are important to understand the concentration distribution of both the MPs and ARGs in agriculture impacted soils, a natural reservoir of both emerging contaminants.

Cadmium (Cd) is a heavy metal of concern in contaminated sites because of its high toxicity to soil biota and humans. Typically, Cd exposure is thought to be dominated by dissolved Cd in soil pore water and, thus, dermal uptake. In this study, we investigated the uptake, toxicity, and maternal transfer of Cd in a standard soil invertebrate, the oribatid mite (Oppia nitens), which is common to boreal and temperate ecozones. We found total soil Cd predicted Cd uptake in adult and juvenile O. nitens with no significant uptake from pore water by juvenile mites. Cadmium significantly inhibited juvenile production and recruitment as well as reduced adult fecundity. Adult O. nitens maternally transferred 39–52% of their Cd body burden to juveniles (tritonymphs) while the maternally-acquired Cd accounted for 41% of the juvenile internal Cd load. Our results suggest that dermal adsorption of metal ions is not important for O. nitens and that maternal transfer of Cd in soil invertebrates has ecological and toxicological implications for populations of soil invertebrates. Maternal transfer should be incorporated as a criterion in setting environmental soil quality guidelines (SQGE) for cadmium and other non-essential heavy metals.

The increasing content of platinum group metal particles emitted into the environment by car traffic is gradually attracting the attention of the scientific community. However, the methods for the determination of platinum group metals in environmental matrices are either costly or suffer from low sensitivity. To facilitate the use of less sensitive, but significantly cheaper, devices, the preconcentration of platinum group metals is employed. For platinum, a multitude of preconcentration approaches have been published. On the contrary, the preconcentration approaches for palladium are still rare. In this work, the development, optimization, and testing of a new approach is described; it is based on a preconcentration of palladium on octadecyl modified silica gel together with the complexing agent dimethylglyoxime, and it is then analyzed with the high-resolution continuum-source atomic absorption spectrometry. For comparison, a newly developed sorbent, QuadraSil™ TA, with a high affinity for platinum group metals was also tested. The preconcentraiton approach was tested on the lichen Hypogymnia physodes, which served as a bioindicator of palladium emissions. The case study site was a mid-sized city in central Europe: Brno, Czech Republic. The dry “bag” monitoring technique was used to collect the palladium near roads with a large span of traffic density. The developed analytical approach confirmed an increasing concentration of palladium with increasing exposure time and intensity of the traffic. Consequently, a simple relationship between the amount of bioaccumulated palladium and traffic density was established.

Rapid urbanization is a global phenomenon that is increasingly exposing organisms to novel stressors. These novel stressors can affect diverse aspects of organismal function, including development of condition-dependent ornaments, which play critical roles in social and sexual selection. We investigated the relationship between metal pollution, proximity to roads, and carotenoid- and melanin-based plumage coloration in a common songbird, the great tit (Parus major). We studied populations located across a well-characterized metal pollution gradient and surrounded by roadway networks. Metal exposure and road-associated pollution could reduce carotenoid-based pigmentation by inducing oxidative stress or affecting habitat quality, but metals could also enhance melanin-based pigmentation, through effects on melanogenesis and testosterone concentrations. Using a large sample size (N > 500), we found that birds residing close to a point source for metals had reduced ultraviolet chroma, a component of carotenoid-based pigmentation. Moreover, birds with high feather metal concentrations had lower carotenoid chroma, hue, and ultraviolet chroma, with effects modified by age class. Birds residing closer to roads also had lower carotenoid chroma and hue. Melanin-based pigmentation showed high between-year repeatability, and no association with anthropogenic pollution. Results suggest that carotenoid-, but not melanin-, based pigmentation is negatively affected by multiple anthropogenic stressors. We are the first to demonstrate a negative association between roads and a plumage-based signaling trait, which could have important implications for sexual signaling dynamics in urban landscapes.

The effects of dike construction on the geomorphology and sedimentary processes of tidal flats were investigated using high-precision topographic profiling, short cores, and unmanned aviation vehicle (UAV)-assisted photogrammetry to understand their adverse consequences on the benthic ecosystem. Tidal flats at the south of Shinsi Island near one of the two sluice gates of the Saemangeum dike, display prominent morphologic features known as shelly sand ridges or cheniers (sensu Otvos, 2000) that have migrated landward about 5 m in a year. The tidal flats were dominated by erosion from winter to spring and by deposition during the remainder of the year except for the periods of heavy precipitation when tidal drainage channels became larger and deeper by headward erosion. With overall coarser-grained surface sediments, the presence of actively migrating wave-built cheniers are in stark contrast to muddy tidal flats with a monotonous morphology before the completion of the Saemangeum dike in 2006. Southeasterly waves reflected from the dike during winter to spring when north to northwesterly winds prevail account for the wave-induced onshore sediment transport and rapid morphologic changes in the tidal flats despite their location protected from offshore waves. The diversity and biomass of major macrofauna species tend to increase during rapid erosion and decrease during rapid deposition, highlighting the anthropogenic effect of dike-induced physical disturbance on the benthic ecosystem in the otherwise sheltered tidal flats.

Doping of nitrogen and sulfur on biochar (NS-B) was investigated by a novel and improved method for diethyl phthalate (DEP) removal. The preparation parameters including pyrolysis temperature and size of peanut shell biochar as well as thiourea/biochar mass ratio were selected as independent variables at three levels by applying the Box-Behnken design. The ANOVA results indicated that thiourea/biochar mass ratio exhibited the most significant effect. The comprehensive effects of the three factors on DEP removal efficiency were further elaborated, combining with the characterization results of the obtained NS-B materials. The formation of the pyridinic N and oxidized S groups examined by XPS was responsible for enhancing the DEP removal efficiency. The adsorption kinetic model fitting illustrated that large micropores and numerous adsorption sites improved the adsorption capacity of NS-B. According to the adsorption isotherm model fitting, NS-B (temperature 375 °C, size 300 mesh and thiourea/biochar mass ratio 0.1) possessed much higher maximum adsorption capacity for DEP (14.34 mg g⁻¹) than biochar (6.57 mg g⁻¹). NS-B exhibited excellent reusability towards DEP removal after five times recycling. Moreover, NS-B also had the potential in peroxydisulfate activation. These findings provide new insights into the environmental implications of NS-B.

Cypermethrin is a frequently used insecticide in agriculture and households but its chronic and molecular effects are poorly known are . Here we describe effects of sublethal cypermethrin exposure on the global transcriptome in the brain of honey bees determined by RNA-sequencing. Exposure for 48 h to 0.3 ng/bee cypermethrin (3 ng/mL sucrose solution) causes 38 differentially expressed genes (DEGs), of which 29 are up-regulated and 9 down-regulated. Exposure to 3 ng/bee causes differential expression of 265 DEGs (209 up-, 56 down-regulated). Among the 24 DEGs shared by both concentrations are genes encoding muscular structure, muscular processes and esterase B1. Functional analysis (GO term analysis) confirms the enrichment of muscular development, structure and function among the 89 and 35 significantly altered GO terms at the low and high concentration, respectively. Up-regulation of nine DEGs determined by RT-qPCR showed a good correlation with RNA-sequence data. Among them are genes including esterase B1, titin, twitchin, mucin-19, insulin like growth factor binding protein, golgin like protein and helix loop protein. Our study demonstrates for the first time molecular effects of cypermethrin at environmental concentrations, which include expressional induction of genes encoding muscular and cellular processes and metabolism enzymes. Further studies should demonstrate the physiological consequences in bees.

Microbial responses to Cu pollution as a function of Cu sources (Cu salts and commercial Cu fungicides) were assessed in a soil using basal soil respiration, and bacterial and fungal community growth, as endpoints. The soil was amended with different concentrations (0–32 mmol Cu kg⁻¹) of Cu nitrate, Cu sulfate, Bordeaux mixture and 3 types of Cu oxychloride. Cu salts decreased soil pH, while this was not found with the other Cu sources. This difference in soil pH effects caused differences in the respiration, bacterial growth and fungal growth response. Basal soil respiration was negatively affected by Cu addition when the soil was spiked with Cu salts, but almost unaffected by commercial Cu fungicides. Bacterial growth was significantly and negatively affected by Cu addition for all the Cu sources, but Cu toxicity was higher for Cu salts than for commercial Cu fungicides. Fungal growth response was also different for Cu salts and commercial Cu fungicides, but only in the long-term. High Cu amendments using Cu salts stimulated fungal growth, whereas for commercial Cu fungicides, these concentrations inhibited fungal growth. Thus, the use of products similar to those used in commercial fungicides is a recommended practice for Cu risk assessments in soil.