Interspecific comparison in metals and PAHs profile in three lichen species, Flavoparmelia caperata, Phaeophyscia hispidula and Pyxine sorediata, were studied in different altitudinal gradients of the Western Himalayas. The species collected from 14 sites, enroute from Dehradun to Morinda (243 Km) including the trekking route 42 Km from Taluka to Morinda having an altitudinal gradient between 850–3,750 m, were analysed for their metals and PAHs. The species showed similar metal as well as PAHs profile under similar altitudinal gradients in the sequence of F. caperata > P. hispidula > P. sorediata. The difference in pollutant concentrations within each lichen species may be related to intrinsic attributes of the species, such as thallus morphology and the presence of lichen substances which are responsible for the sensitivity and accumulation potential of a particular species. Novelty of the present study lies on the fact that all the species show a similar efficiency of reflecting the environmental condition of the area, albeit the coefficient values of individual species for individual pollutant obtained by three-factor ANOVA revealed that the bioaccumulation affinity of F. caperata is significantly higher than P. hispidula and P. sorediata. For individual metals, F. caperata has a higher affinity for Al, Cr, Fe, Pb and Zn while P. hispidula has a significant positive affinity for Fe and Pb. PCA analysis of sites with respect to pollutant revealed the segregation of sites based on source and distance. Combining the bioaccumulation potential parameters along with geostatistical (GIS) techniques establishes that F. caperata species is a better accumulator of metals and PAHs in comparison to P. hispidula and P. sorediata in the temperate regions of the Himalaya.

This study presents surface ozone (O₃) and carbon monoxide (CO) measurements conducted at Bhubaneswar from December 2010 to November 2012 and attempts for the very first time a health risk assessment of the atmospheric trace gases. Seasonal variation in average 24 h O₃ and CO shows a distinct winter (December to February) maxima of 38.98 ± 9.32 and 604.51 ± 145.91 ppbv, respectively. O₃ and CO characteristics and their distribution were studied in the form of seasonal/diurnal variations, air flow patterns, inversion conditions, and meteorological parameters. The observed winter high is likely due to higher regional emissions, the presence of a shallower boundary layer, and long-range transport of pollutants from the Indo-Gangetic Plain (IGP). Large differences between daytime and nighttime O₃ values during winter compared to other seasons suggest that photochemistry is much more active on this site during winter. O₃ and CO observations are classified in continental and marine air masses, and continental influence is estimated to increase O₃ and CO by up to 20 and 120 ppbv, respectively. Correlation studies between O₃ and CO in various seasons indicated the role of CO as one of the O₃ precursors. Health risk estimates predict 48 cases of total premature mortality in adults due to ambient tropospheric O₃ during the study period. Comparatively low CO concentrations at the site do not lead to any health effects even during winter. This study highlights the possible health risks associated with O₃ and CO pollution in Bhubaneswar, but these results are derived from point measurements and should be complemented either with regional scale observations or chemical transport models for use in design of mitigation policies.

To collect a large data set regarding the occurrence of organic substances in sediment, this study presents the examination of 20 micropollutants, as a national survey. The list of target compounds contains two alkylphenols, three polycyclic aromatic hydrocarbons (PAHs) not commonly included in monitoring programmes, six pesticides or metabolites, five pharmaceutical compounds, two hormones, one UV filter and bisphenol A. The selective and sensitive analytical methods, based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) or gas chromatography-time-of-flight mass spectrometry (GC-ToF-MS), allow the quantification at limits comprised between 0.5 and 23 ng/g, depending on the compound. The paper summarizes the analytical results from 154 sampling points. Of the 20 target compounds, 9 were determined at least once, and the sediments contained a maximum of 7 substances. The most frequently detected were PAHs (frequency, 77 %; max., 1,400 ng/g). The pharmaceutical compounds, hormones and pesticides were rarely detected in the samples; the most frequently detected was carbamazepine (frequency, 6 %; max., 31 ng/g). In some cases, the levels of PAHs and bisphenol A exceed the predicted no-effect concentration (PNEC) values.

The objective of the study is to examine the relationship between air pollution, fossil fuel energy consumption, water resources, and natural resource rents in the panel of selected Asia-Pacific countries, over a period of 1975–2012. The study includes number of variables in the model for robust analysis. The results of cross-sectional analysis show that there is a significant relationship between air pollution, energy consumption, and water productivity in the individual countries of Asia-Pacific. However, the results of each country vary according to the time invariant shocks. For this purpose, the study employed the panel least square technique which includes the panel least square regression, panel fixed effect regression, and panel two-stage least square regression. In general, all the panel tests indicate that there is a significant and positive relationship between air pollution, energy consumption, and water resources in the region. The fossil fuel energy consumption has a major dominating impact on the changes in the air pollution in the region.

Triclosan (TCS) is a broad-spectrum bactericide, highly toxic to algae, which is released into the environment via wastewater effluents. Predicted no-effect concentrations (PNECs) for aquatic biota have been proposed in the literature, varying from 1.4 to 1,550 ng/L, reflecting contradicting protection goals. In this work, six rivers in the state of São Paulo were monitored for TCS and caffeine, a tracer for untreated sewage disposal, over a period of more than 1 year. From 71 samples analyzed, 32 contained TCS at concentrations above the limit of quantification, ranging from 2.2 to 66 ng/L, corresponding to a frequency of exceedance of the lowest PNEC of 86 % (six out of seven sites). No correlation between TCS and caffeine was observed, and one of the reasons for that could be the different use patterns in the local populations. Given the high values found in the investigated rivers, TCS seems to be a strong candidate in the priority list of compounds that should be regulated in Brazil to preserve the aquatic environment.

Studies focused on the possible use of spider webs as environmental pollution indicators. This was a first time ever attempt to use webs as indicators of polycyclic aromatic hydrocarbons (PAHs) pollution. The aim of the study was (a) to evaluate whether webs are able to accumulate PM-associated road traffic emissions and be analyzed for organic toxics such as PAHs, (b) to assess if the distance from emission sources could have an influence on the accumulation level of pollutants, and (c) to determine types of pollution sources responsible for a structure of monitoring data set. Webs of four species from the family Agelenidae were sampled for PAHs presence. Data from vehicle traffic sites (i.e., road tunnel, arterial surface road, underground parking) and from railway traffic sites (i.e., two railway viaducts) in the city of Wroclaw (Southwest of Poland) showed a significantly higher mean concentrations of PAHs than the reference site 1 (municipal water supply works). We also found a significant differences at sites differed by the distance from emission sources. The result of PCA analysis suggested three important sources of pollution. We conclude that spider webs despite of some limitations proved useful indicators of road traffic emissions; they could be even more reliable compared to use of bioindicators whose activity is often limited by a lack of water and sun.

To better construct a bioaugmented system for tobacco wastewater treatment, activated sludge was inoculated with different concentrations of the nicotine-degrading bacterium Pseudomonas sp. HF-1. The results showed that inoculum concentrations of 0.55 ± 0.01 and 1.10 ± 0.03 mg/g (dry weight of strain HF-1/dry weight of activated sludge) were best to ensure strain HF-1 survival and successful bioaugmentation. The release pattern of autoinducer (AI) for quorum sensing in the bioaugmented system was also investigated. During the period of HF-1 inoculation, compared with failed bioaugmented systems, AI-2 was significantly increased in the successful systems, suggesting that AI-2-mediated bacterial communication played an important role in the colonization of HF-1. When inoculation of strain HF-1 was stopped, the amount of AI-2 decreased and leveled out in all systems. Notably, there was a greater than threefold increase of short-chain AHLs in failed bioaugmented systems, but no increase in successful ones, implying that the fluctuation of short-chain AHLs could be an indicator of the failure of bioaugmentation. Thus, AI-2-mediated quorum sensing could be implemented to facilitate HF-1 colonization.

The reasons why some cultivars of hot pepper (Capsicum annuum L.) accumulate low levels of Cd are poorly understood. We aimed to compare the characteristics of Cd uptake and translocation in low-Cd and high-Cd hot pepper cultivars by determining the subcellular locations and chemical forms of Cd, and its distribution among different plant organs. We conducted a hydroponic experiment to investigate the subcellular distribution and chemical forms of Cd in roots, stems, and leaves of a low-Cd (Yeshengchaotianjiao, YCT) and a high-Cd cultivar (Jinfuzaohuangjiao, JFZ). The results showed that the concentrations of Cd in almost all subcellular fractions of roots, and in all chemical forms in roots, were higher in YCT than in JFZ. Compared with YCT, JFZ had higher Cd concentrations in almost all subcellular fractions of stems and leaves, and higher Cd concentrations in almost all chemical forms in stems and leaves. Additionally, YCT had significantly higher total Cd accumulation but a lower Cd translocation rate compared with JFZ. In general, the results presented in this study revealed that root-to-shoot Cd translocation via the xylem is the key physiological processes determining the Cd accumulation level in stems and leaves of hot pepper plants. Immobilization of Cd by the cell walls of different organs is important in Cd detoxification and limiting the symplastic movement of Cd.

Novel magnetic carbonaceous bio-char was hydrothermal prepared from microalgae under different loadings of iron and its structures and surface chemistry were characterized with Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and nitrogen adsorption-desorption isotherm (BET). The morphology of bio-char changed from sheet to particle as iron loading increased and its surface area also increased. When 3.0 g of dried microalgae and 6.0 mmol iron salt ((NH₄)₂SO₄·FeSO₄·6H₂O) were mixed and treated, the obtained bio-char possessing the highest amount of oxygen-containing functional groups resulted in the best adsorption performance on tetracycline (TC). This adsorption process was fitted to Langmuir adsorption isotherm and the maximum adsorption capacity was 95.86 mg/g, which is higher than other bio-char reported. The iron loading contributed to the higher adsorption capacity of bio-char, which may be due to three factors, the high surface area, more hydrogen bonding, and bridging effects of the structural Fe for TC. Our data suggest that bio-char may have more important role in stabilization of pollutants in the environment.

The aim of the present study was to describe the accumulation of trace metals in the liver, kidney, gills, muscles, and skin of four edible fish species (Tor putitora, Cirrhinus mrigala, Labeo calbasu, and Channa punctatus) of Rawal Lake Reservoir, Pakistan. The fish samples were collected in the pre-monsoon (May 2008) and post-monsoon (October 2007) seasons and were analyzed for heavy metals by using an atomic absorption spectrometer. Kidney and liver showed relatively high concentrations of heavy metals. The accumulation of metals in the different organs of the fish (skin, muscles, and gills) in post-monsoon was higher than in pre-monsoon. In pre-monsoon, the metals followed the trend Zn > Pb > Fe > Cr > Ni > Mn > Co > Cu > Cd > Li, while in the post-monsoon season, the trend was Fe > Pb > Cr > Ni > Zn > Cu > Co > Mn > Cd > Li. The concentrations of Ni, Cr, and Pb in the muscle of all fish species were higher than the WHO guideline values of heavy metals in fishes for human consumption except in T. putitora. Cu level was nearly equal to the WHO maximum levels in C. mrigala and L. calbasu, while it was lower in T. putitora and C. punctatus. It is strongly advocated that risk assessment studies should be conducted and there is an urgent need for water quality restoration and management of Rawal Lake Reservoir.