The identification and quantification of ascorbic acid, phenolic acids and flavonoids were carried out simultaneously with a rapid method of reverse-phase high-performance liquid chromatography (RP-HPLC). Total flavonoid contents were being determined by UV–Vis spectrophotometry, and total phenolic contents were determined by UV–Vis spectrophotometry using the Folin-Ciocalteu Reagent (FCR) method.In all of the individual contents and total phenolic content analysis, the best results were obtained with the methanol-water solvent system. The methanol-hexane solvent system was selected as the best for the extraction of total flavonoid contents. The reason for this difference is the flavonoids in the analyzed samples which were the lipophilic character. Examining the algae species, the highest contents were achieved from Ulva lactuca and Ceramium rubrum species. Depending on industrial activity and the population density, regional characteristics have been shown to be effective in the changes of these contents which show antioxidant properties.

As the production of plastic products continues to increase, determining the fate of plastic waste in the environment is of high importance. Densely populated areas, such as Mediterranean coastlines, represent locations of high pollution risk for surrounding environments. Thus, this study aims to assess the abundance, size, and composition of floating meso- and microplastics collected during four weeks in 2018 in the Ligurian and Tyrrhenian Seas. The results show average meso- and microplastic particle concentrations of 28,376 ± 28,917 particles km⁻², and an average mass of 268.61 ± 421.18 g km⁻². The particle shape ratio was 65% fragments, 19% films, 10% lines, 4% foams, and 2% pellets. Microplastic particles comprised 65% of the sample. Analysis with attenuated total reflection Fourier transform infrared spectroscopy showed predominant polymer types included polyethylene, polypropylene, polystyrene, and polyamide. These data are an important starting point for long-term monitoring of plastic pollution levels within this region.

Cyst abundance and identity are essential for understanding and predicting blooms, and for assessing the dispersal of toxic target dinoflagellate species by natural or human mediated ways, as with ballast waters. The aim of this study was to apply rapid, specific and sensitive qPCR assays to enumerate toxic dinoflagellate cysts in sediment samples collected from Adriatic harbours. The molecular standard curves of various target species allowed obtaining the rDNA copy number per cyst. The analytical sensitivity for specific standard curves was determined to be 2 or 10 rDNA copies per reaction. The abundance varied in the range of 1–747 dinoflagellate cysts g⁻¹ dry weight. The assays showed greater sensitivity as compared to counts by light microscopy. This qPCR method revealed a powerful tool for the quantification of cysts from toxic dinoflagellate resting stages in sediment samples from Adriatic ports.

The gastrointestinal tracts of 229 demersal fish belonging to two species (Mullus barbatus, Merluccius merluccius) were examined for microplastic ingestion. Samples were collected in 3 different FAO Geographical Sub-Areas (GSA-9, GSA-17, GSA-19) of the Mediterranean Sea. Ingested microplastics were characterized using a stereo-microscope: observed, photographed, measured and categorized according to size class, shape and colour. Plastic fragments (ranging from 0.10 to 6.6 mm) were detected in 23.3% of the total investigated fish; a total of 65 plastic particles (66% constituted by fibers) were recorded. The percentage of plastic ingestion shows high variability between the two species and among the different sampling area. The highest frequency (48%) was found in European hake from GSA-19. These preliminary results represent a baseline for the implementation of the Marine Strategy Framework Directive descriptor 10 in Italy as well as an important step for detecting microplastics in bioindicator species from different GSAs.

This study provides the first measurement of microplastic abundance and distribution in surface waters and sediments in Tampa Bay, FL. Microplastic concentrations in discrete water samples ranged from 0.25 to 7.0 particles/L with an average of 0.94 (±0.52) particles/L. Samples taken with a 330 μm plankton net had 1.2–18.1 particles/m³ with an average of 4.5 (±2.3) particles/m³. Discrete samples were 200 times higher than net samples, suggesting substantial losses or undersampling with the net. For both discrete and plankton tow samples, there were no significant differences in concentrations between stations or regions. Intense rainfall events in the summer always preceded samples with substantially higher counts. Most (>75%) microplastics were fibers. Using an average value of 1 particle/L, Tampa Bay contains ~4 billion microplastic particles. Surface sediments had an average of 280 (±290) particles/kg, ranging from 30 to 790 particles/kg. Highest concentrations of microplastics were found in sediments close to industrial sources; lowest values in Middle and Lower Tampa Bay are consistent with shorter residence times.

The effect of fiber type (cotton, polyester, and rayon), temperature, and use of detergent on the number of microfibers released during laundering of knitted fabrics were studied during accelerated laboratory washing (Launder-Ometer) and home laundering experiments. Polyester and cellulose-based fabrics all shed significant amounts of microfibers and shedding levels were increased with higher water temperature and detergent use. Cellulose-based fabrics released more microfibers (0.2–4 mg/g fabric) during accelerated laundering than polyester (0.1–1 mg/g fabric). Using well-controlled aquatic biodegradation experiments it was shown that cotton and rayon microfibers are expected to degrade in natural aquatic aerobic environments whereas polyester microfibers are expected to persist in the environment for long periods of time.

The concentrations of nine heavy metals accumulated in different organs of two crab species collected from the South East coast of India were estimated. The order of trace metal concentration in different organs of Portunus pelagicus was Cu > Mn > Cd > Ni > Pb > Co > Hg = Cr = U in gills, Cu > Mn > Cd > Ni > Pb = Co > Hg > Cr = U in hepatopancreas, and Cu > Cr > Ni > Mn > Cd > Pb > Co > Hg > U in muscles, whereas that for Portunus sanguinolentus was Cu > Mn > Cd > Ni > Pb > Co > Hg > Cr = U in gills, Cu > Mn > Cd > Ni > Pb = Co > U > Cr = Hg in hepatopancreas, and Cr > Cu > Ni > Mn > Cd > Co > Pb > Hg = U in muscles. The order of trace metal uptake for different organs was gills > hepatopancreas > muscles. Individual mean bioaccumulation index (IMBI) values varied between 0.0 and 0.52, 0.0 and 0.28, and 0.06 and 0.30 for gills, hepatopancreas, and muscles, respectively. Cr in muscles of P. sanguinolentus and Cu and Cd in all organs of both the species were found to be higher than the maximum permitted concentration recommended by food safety guidelines. Target hazard quotient (THQ) results suggested that there is a potential risk due to Co, Cd, and Cr, particularly for children, if the crab consumption frequency is more than once a month.

The ballast water management convention incorporates principles of risk assessment. A new ballast water management risk assessment model was developed to support the implementation of most efficient management measures, which we also present as a flowchart decision support system model. The risk assessment model was tested using data from port baseline surveys where available, and real shipping and ballast water discharges data. The here presented ballast water management risk assessment and possible management options are applicable elsewhere to support and improve complex decision making in the implementation of management requirements according to the ballast water management convention. If needed, the model may easy be adapted to address local specifics in any other region or area.

The temporal and spatial distributions of dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP), and dissolved silicate (DSi), and their long-term changes were investigated in Bohai Bay (BHB) in spring, summer, and autumn (2013–2014). The high DIN values were consistently distributed in the western inshore waters, mainly determined by terrestrial factors, e.g., riverine input, while DIP and DSi were mostly distributed in the southern coastal waters, the central BHB, or near the sea port Caofeidian in northern BHB, largely related to non-terrestrial factors, e.g., sediment release. Based on the nutrient distribution, BHB could be partitioned into western and eastern parts, with −15 m depth as the separation. The long-term variations of nutrients since 2000 showed an increase in DIN and decreases in DIP and DSi. Relatively slow changes in DIN and DIP and a rapid decrease in DSi were exhibited in summer, which was associated with precipitation and sediment release.

In order to estimate the possible effects of existing ballast tank sediment management routine in ports the respective legal framework from different states was examined and the operational modes of selected Adriatic shipyards was analysed. The goal was to determine if the States' administration and ports' management are aware of risks which sediments pose to human health and environment due to possible presence of harmful aquatic organisms and pathogens (HAOP) or high concentrations of heavy metals. The analysis revealed that sediments from ballast tanks after being collected, are subject to the same handling procedure as any other waste material generated during ships' repair and maintenance. In addition, measures preventing sediment drainage into the sea or procedures for analyzing the presence of heavy metals or toxics have not been identified. The paper proposes the procedures ensuring the more advanced level of protection from HAOP and potentially toxic substances from ballast sediment.