Refinar búsqueda
Resultados 21-30 de 6,473
Performance and emission characteristics of the diesel engine running on neem (Azadirachta indica) biodiesel with effect of exhaust gas recirculation at optimum injection strategies
2020
Singh, Y. | Singla, A. | Sharma, A. | Singh, N. K.
Environmental pollution and strict emission norms are promoting researchers to explore the methods for reducing pollution and provide optimum solution. By considering these situation as the baseline, study was conducted to analyse the effect of exhaust gas recirculation (EGR) on performance and emission of the DI diesel engine. The effects of Injection Timings (IT), split injection and Exhaust Gas Recirculation on performance, emission characteristics of diesel engine fuelled neem biodiesel blends are investigated. Initially experiments are conducted with diesel, NB5, NB10 with original injection timing of 23° bTDC with direct injection and are considered as base reading. The fuel injection is optimized (at 19° bTDC and 16% split injection) and the effect of EGR rate at this optimized condition is analysed. Significant reduction of about 65.3%, 67% and 57% in the amount of NOx was obtained at full load as compared to base readings. Smoke emissions reduced by 2.8-3.4% and CO emissions reduced by around 52% for diesel and biodiesel blends at full load.
Mostrar más [+] Menos [-]Spatiotemporal Analysis of Carbon Monoxide Observed by Terra/MOPITT in the Troposphere of Iran
2020
Raispour, K. | Khosravi, Y.
It has been more than 20 years that the Measurement of Pollution in The Troposphere (MOPITT) mission onboard the NASA Terra satellite keeps providing us CO atmospheric concentration measurements around the globe. The current paper observes CO mixing ratio from the MOPITT Version 8 (MOP03J_V008) instrument in order to study the spatiotemporal analysis of CO (spanning from April 2000 to February 2020) in the Troposphere of Iran. Results indicate that the average CO in Iran’s troposphere has been 133.5 ppbv (i.e., 5.5 ppbv lower than the global mean CO). The highest distribution of CO (with an average of 150 ppbv) belongs to the city of Tehran (the capital of Iran) as well as the Caspian Sea coastal area, while the lowest value (with an average of less than 110 ppbv) has been estimated on the Zagros Mountains (southwestern Iran). The highest and lowest CO values have been observed in cold and hot months, respectively. Seasonally speaking, it is also clear that the highest and lowest carbon monoxide values occur in winter and summer, respectively. The vertical profile of MOPITT CO shows the maximum CO concentration at lower levels of the troposphere. It has been expanded up to 150 hPa. The trend is investigated by means of Pearson correlation coefficient statistical method. Overall, long-term monitoring of MOPITT CO in Iran indicates a decreasing trend of tropospheric CO over the 20 years (Y=-0.008X+449.31). Possible reasons for such a decrease can be related to improved transportation fleet, increased fuel quality, plans for traffic control, promotion of heating systems, and promotion of industrial fuels and factories.
Mostrar más [+] Menos [-]Analyses and Pollution Potential of heavy metals at The Jerangau-Jabor Landfill in Kuantan, Malaysia
2020
How F., N. F. | Mohd Noh, N. S. | Nordin, N. A. | Abang Sapani, D. F. N.
The impact of Industrialization has always been related to the better economic and social transformation. However, it should be well planned for environmental sustainability. Landfilling is the most used municipal solid waste (MSW) disposal method in Malaysia. Raw and treated leachate collected from Jerangau-Jabor Landfill Site (JJLS), Kuantan, Pahang were analysed for the content of silver, cadmium, chromium, copper, iron, lead, zinc using Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The metal analyses result were compared with standard limits from the Environmental Quality (Control of Pollution from Solid Waste Transfer Station and Landfill) Regulations 2009, Malaysian Environmental Quality Act 1974 (Act 127) set by the Department of Environment, Ministry of Natural Resources and Environment, Malaysia and used to calculate the sub-leachate pollution index of heavy metals (sub-LPIhm) to evaluate the pollution potential of the heavy metals. The sub-LPIhm is one of the sub-index needed to calculate the Leachate Pollution Index (LPI) together with the sub-LPI organic (sub-LPIorg) and sub-LPI inorganic (sub-LPIinorg). LPI is the level of leachate pollution potential of a landfill site. All the heavy metals in the raw leachate were significantly higher than the treated leachate. Some were found to be above the permissible standard limit stipulated in the regulation. However, the sub-LPIhm showed that the level of heavy metal pollution potential of the leachate is low. It is recommended that the treated leachate should undergo continuous treatment to ensure the discharge leachate complied with the standard limit.
Mostrar más [+] Menos [-]Phytoremediation of soil Contaminated by Heavy Metals within a Technical Landfill Center Vicinity: Algerian Case Study
2020
Boukaka, Kh. | Mayache, B.
The contamination of environment with heavy metals has become a serious problem which can affect the human health. Three heavy metals (Zn, Cd and Pb) were determined in soil and plants for below and aboveground parts along landfill Demina center, located in the wilaya of Jijel, Algeria to evaluate their behavior and uptake by Ditrichia viscosa, Juncus effusus and Solanum nigrum. In our research we tried to study the capacity of these spontaneous plants to accumulate and to translocate heavy metals from soil to their tissues during three years. The heavy metals examined in the soils of the study area showed variations in concentrations, the study area may be practically unpolluted with Zn and Pb (CF; 0.45 and 0.98 successively) and very contaminated with Cd (CF; 8.53). According to the results obtained, the soil is uncontaminated with lead (Igeo=-0.60) and zinc (Igeo= -1.42) but it is heavily contaminated with cadmium (Igeo=2.5) along the study area. Overall the BCFS (bioconcentration factors) are superior to 1, for the all heavy metals and species. However, BCFs follow the following order; BCFZn>BCFPb>BCFCd for Ditrichia viscosa, the following order BCFPb>BCFZn>BCFCd for Juncus effuses and follow the following order; BCFZn>BCFCd>BCFPb for Solanum nigrum. The TFs (translocation factor) of the present study showed that Solanum nigrum can translocate the three of the metals into their aboveground parts.
Mostrar más [+] Menos [-]Application of Pollution Indices and Health Risk Assessment of Heavy Metals in the waters of a South-eastern Nigeria River
2020
Anyanwu, E. D. | Adetunji, O. G. | Nwachukwu, E. D.
This study on the heavy metal content of a local drinking water source in South-east Nigeria was carried out in 3 sampling stations between May 2019 and October 2019. Pollution indices and health risk assessment for non-carcinogenic were used to check the water’s suitability for human consumption. The indices were heavy metal pollution index (HPI) and Contamination Index (Cd). Eight metals were evaluated with standard methods and compared with Nigerian and WHO drinking water standards. Some metals like iron, lead and cadmium exceeded the recommended limits. The stations Heavy Metal Pollution Index ranged between 511.4 and 512.4 while the monthly values ranged between 279.8 and 547.6; all exceeding the threshold value of 100. Contamination Index ranged between 3.12 and 3.32 (stations) and -0.80 to 4.80 (month) indicating high contamination potential and low to high contamination potentials respectively. All the hazard indices also exceeded one (1). Stations 1 and 2 were higher in all the indices. All the indices were linked the high values of iron, lead and cadmium, influenced by sand mining activities. The pollution indices and Health Risk Assessment converged to show that the waters of Iyiakwu River are not fit for human consumption. The children are more vulnerable since it the main source of drinking water in the area.
Mostrar más [+] Menos [-]Pb phytostabilization by fast-growing trees inoculated with Pb-resistant plant growth-promoting endophytic bacterium
2020
Yongpisanphop, Jiraporn | Babel, S. | Kruatrachue, M. | Pokethitiyook, P.
Inoculation of endophytic bacteria has been accepted as a promising technique to assist phytostabilization of heavy metal-contaminated soils. This study investigated the effects of inoculating a bacterial strain closely related to Pseudomonas pyschrophila on the plant growth, and phytostabilization of fast-growing trees Acacia mangium and Eucalyptus camaldulensis, growing on artificial spiked soil with Pb up to 1500 mg/kg. After 60 days, the results showed that the strain closely related to P. pyschrophila slightly increased Pb bioavailability and Pb uptake by A. mangium, compared to non-inoculated controls. It slightly reduced Pb bioavailability in soil, but it did not affect the Pb uptake by E. camaldulensis, compared to non-inoculated controls. Interestingly, it was able to significantly increase Pb content in shoots by 3.07-fold in A. mangium and 2.95-fold in E. camaldulensis, compared to non-inoculated controls. Although the inoculation of the strain closely related to P. pyschrophila slightly increased the translocation factor (TF) of Pb in both tree species, their TF values were less than 1. This indicates that plants associated with the strain closely related to P. pyschrophila are suitable for phytostabilization of A. mangium, which may be used for cleaning up Pb contaminated sites. This strain displayed different influences on plant species and was found not suitable for phytostabilization of E. camaldulensis.
Mostrar más [+] Menos [-]Synthesis and characterization of activated carbon from biowaste-walnut shell and application to removal of uranium from waste
2020
Yaman, M. | Demirel, M. H.
The aim of this study is to synthesize and characterize an economical and environmentally-friendly adsorbent with high adsorption capacity. For this purpose, the walnut shells (Juglans regia L.) were chemically modified using sulfuric and citric acids, separately. After pyrolysis and synthesis of activated carbon (AC), the optimization of conditions at the preconcentration/removal step was performed using parameters such as pH and contact time for uranium in the model solutions. The measurements were carried out by inductively coupled plasma-mass spectrometry (ICP-MS). From the shapes of the BET isotherms, it may be stated that activated carbon exhibit type I. It was found that the surface area and total pore volume of the activated carbon were 696.6 m2/g and 0.35 mL/g, respectively. The adsorption capacity was found to be 220 mg/g. It was found that the optimum pH is 6.0 for preconcentration/removal using AC obtained by sulfuric acid as chemically-modifier. The optimized method was applied to determination of U at ng/mL levels in the model solutions.
Mostrar más [+] Menos [-]Analysis of Heavy Metal Contents and Non-carcinogenic Health Risk Assessment through Consumption of Tilapia Fish (Oreochromis niloticus)
2020
Tayebi, L. | Sobhanardakani, S.
Due to the fish are often at the top of the aquatic food chain and may accumulate large amounts of heavy metals from the water, this study was conducted to determine of Cd, Cr, Pb and Ni contents in the muscle of imported tilapia fish marketed in the city of Hamedan in 2017. In so doing, totally, 27 muscle samples from nine different brands of tilapia fish were randomly collected from the market basket of the study area. After preparation and processing the samples in the laboratory, the concentration of metals, was determined using inductively coupled plasma-optical emission spectrometer. The results showed that the mean concentrations (mg/kg) of Cd, Cr, Pb, and Ni in samples were 0.26 ± 0.09, 1.54 ± 0.15, 0.55 ± 0.11, and 0.67 ± 0.20 respectively. Also, the mean contents of Cd and Pb were higher than the maximum permissible levels (MPL) established by the World Health Organization (WHO). The computed health risk index values showed that no potential health risk for adults and children via consuming the muscle of tilapia fish at the current consumption rate for the study area. Based on the results, due to the mean contents of Cd and Pb in the muscle samples of tilapia fish were higher than the MPL, therefore, serious attention to the reduction of the discharge of hazardous substances in the aquatic ecosystems and also periodic monitoring of chemical residue particularly toxic heavy metals in the high-demand food is recommended.
Mostrar más [+] Menos [-]Assessment of Heavy Metals Contamination and the Risk of Target Hazard Quotient in Some Vegetables in Isfahan
2020
Miranzadeh Mahabadi, H. | Ramroudi, M. | Asgharipour, M. R. | Rahmani, H. R. | Afyuni, M.
The main objective of this study is to evaluate heavy metals contamination of highly consumed vegetables and hazardous effects of consuming these vegetables. The study was conducted in vegetable fields in three different regions according to the level of environmental pollutions, including "Isfahan", "Flavarjan" and "Faridan, Golpayegan and Natanz". Six types of vegetables in each field with three replicates in each region were selected in the summer of 2017 by the random sampling method from vegetable fields. The level of heavy metals (Pb, Cu, Co, Cd and Cr) in vegetables has been measured for each sample. The result showed that in the Isfahan region, the highest daily intake of Pb, Cu, Co, Cd and Cr for the consumption of all the vegetables was obtained in the recipients. The highest target hazard quotient for non-cancerous diseases of contaminated vegetables was 28.9 and 21.1 in "Isfahan" for children and adults, respectively. The target hazard quotient for vegetable consumption was greater than one and at high hazard for both age groups. The principal component analysis showed that the contamination by the heavy metals in the "Isfahan" and "Falavarjan" regions overlapped and the risk of contamination of heavy metals in urban vegetables in both regions increased the hazard of non-cancerous diseases. It is highly recommended that the quality standards of foods that are imposed on the production of food crops.
Mostrar más [+] Menos [-]Study of Solute Dispersion with Source/Sink Impact in Semi-Infinite Porous Medium
2020
Kumar, R. | Chatterjee, A. | Singh, M. K. | Singh, V. P.
Mathematical models for pollutant transport in semi-infinite aquifers are based on the advection-dispersion equation (ADE) and its variants. This study employs the ADE incorporating time-dependent dispersion and velocity and space-time dependent source and sink, expressed by one function. The dispersion theory allows mechanical dispersion to be directly proportional to seepage velocity. Initially the aquifer is assumed contaminant free and an additional source term is considered at the inlet boundary. A flux type boundary condition is considered in the semi-infinite part of the domain. Laplace transform technique (LTT) is then applied to obtain a closed form analytical solution. The effect of source/sink term as a function in the one-dimensional advection-dispersion equation is explained through the graphical representation for the set of input data based on similar data available in hydrological literature. Matlab software is used to obtain the graphical representation of the obtained solution. The obtained analytical solution of the proposed model may be helpful in the groundwater hydrology areas.
Mostrar más [+] Menos [-]