Fine particulate matter (PM2.5) exposure is a significant cause of chronic obstructive pulmonary disease (COPD), but the detailed mechanisms involved in COPD remain unclear. In this study, we established PM2.5-induced COPD rat models and showed that PM2.5 induced pulmonary microvascular injury via accelerating vascular endothelial apoptosis, increasing vascular permeability, and reducing angiogenesis, thereby contributing to COPD development. Moreover, microvascular injury in COPD was validated by measurements of plasma endothelial microparticles (EMPs) and serum VEGF in COPD patients. We then performed m⁶A sequencing, which confirmed that altered N⁶-methyladenosine (m⁶A) modification was induced by PM2.5 exposure. The results of a series of experiments demonstrated that the expression of methyltransferase-like protein 16 (METTL16), an m⁶A regulator, was upregulated in PM2.5-induced COPD rats, while the expression of other regulators did not differ upon PM2.5-induction. To clarify the regulatory effect of METTL16-mediated m⁶A modification induced by PM2.5 on pulmonary microvascular injury, cell apoptosis, permeability, and tube formation, the m⁶A level in METTL16-knockdown pulmonary microvascular endothelial cells (PMVECs) was evaluated, and the target genes of METTL16 were identified from a set of the differentially expressed and m⁶A-methylated genes associated with vascular injury and containing predicted sites of METTL16 methylation. The results showed that Sulfatase 2 (Sulf2) and Cytohesin-1 (Cyth1) containing the predicted METTL16 methylation sites, exhibited higher m⁶A methylation and were downregulated after PM2.5 exposure. Further studies demonstrated that METTL16 may regulate Sulf2 expression via m⁶A modification and thereby contribute to PM2.5-induced microvascular injury. These findings not only provide a better understanding of the role played by m⁶A modification in PM2.5-induced microvascular injury, but also identify a new therapeutic target for COPD.

The use of biomass for cooking and heating is considered an important factor associated with chronic obstructive pulmonary disease (COPD), but few studies have previously addressed its underlying mechanisms. Therefore, this research aimed to evaluate the effects of biomass-related PM₂.₅ (BRPM₂.₅) exposure on 16HBE human airway epithelial cells and in mice with regard to mitochondrial dysfunction. Our study indicated that BRPM₂.₅ exposure of 16HBE cells resulted in mitochondrial dysfunction, including decreased mitochondrial membrane potential, increased expression of fission proteins-phospho-DRP1, increased mitochondrial ROS (mtROS), and decreased levels of ATP. BRPM₂.₅ altered the mitochondrial metabolism of 16HBE cells by decreasing mitochondrial oxygen consumption and glycolysis. However, Mitochondria targeted peptide SS-31 eliminated mitochondrial ROS and alleviated the ATP deficiency and proinflammatory cytokines release. BRPM2.5 exposure resulted in abnormal mitochondrial morphological alterations both in 16HBE and in lung tissue. Taken together, these results suggest that BRPM₂.₅ has detrimental effects on human airway epithelial cells, leading to mitochondrial dysfunction, abnormal mitochondrial metabolism and altered mitochondrial dynamics. The present study provides the first evidence that disruption of mitochondrial structure and mitochondrial metabolism may be one of the mechanisms of BRPM₂.₅-induced respiratory dysfunction.

Sulfur-containing organic pollutants in wastewater could threaten human health due to their high malodor and toxicity, and their conversion processes are more complex than inorganic sulfur compounds. Membrane aerated biofilm reactor (MABR), as a novel and environmentally-friendly biofilm-based technology, is able to remove inorganic sulfur in synthetic wastewater. However, it is unknown how sulfur-containing organic pollutants in actual wastewater are transformed in MABR system. This work demonstrated the feasibility of MABR to eliminate sulfur-containing organic pollutants in actual wastewater, and the removal efficiency could be reached at approximately 100%. Meanwhile, over 70% of sulfur-containing organic contaminants were transformed to SO₄²⁻ during the long-term operation. Further analysis indicated that the functional bacteria that participated in sulfur transformation and carbohydrates degradation (e.g., Chujaibacter, Microscillaceaesp., and Thiobacillus) were evidently enriched when treating actual wastewater. Moreover, the critical metabolic pathways (e.g., sulfur metabolism, glycolysis metabolism, and pyruvate metabolism), and the corresponding genetic expressions (e.g., nrrA, tauA, tauC, sorA, and SUOX) were evidently up-regulated during long-term operation, which was beneficial for the transformation of sulfur-containing organic pollutants in actual wastewater by MABR. This work would expand the application of MABR for treating the actual sulfur-containing organic wastewater and provide an in-depth understanding of the organic sulfur transformation in MABR.

Uncoupling chemical looping gasification (CLG), the organic sulfur evolution was simulated and explored qualitatively and quantitatively using typical sulfur compounds on TG-MS and temperature-programmed fixed bed. The HS radical in the reductive atmosphere easier converted to H₂S and COS. H₂O activated the evolution of S which was stably bonded to carbon, and H₂ generated from gasification and oxidation of reductive Fe by H₂O contributed to the release of sulfur. The proportion of H₂S released from sulfur compounds was greater than 87% in steam gasification, and more than 60% during CLG. Oxygen carriers promoted the conversion of sulfur to SO₂ in the mid-temperature region (500 °C–700 °C), and H₂S in the high temperature region (700 °C–900 °C). Sulfur species played a pivotal role in sulfur evolution at low temperature of CLG. The organic sulfur in mercaptan and benzyl were more easily converted and escaped than in thiophene and phenyl. The thermal stability of sulfur species, the presence of steam and OC affected the initial temperature and peak concentration of gas sulfur release as well as sulfur distribution. Consequently, CLG strengthened the sulfur evolution, and made it possible to targeted restructure the distribution of sulfur by regulating process parameters, or blending fuel with different sulfur species for emission reduction, and selective conversion of sulfur.

Aqueous film-forming foam (AFFF) has historically contained high concentrations of long-chain per-and polyfluoroalkyl substances (PFAS), which have been linked with adverse health outcomes. However, the toxicity of historical AFFFs remains largely unknown, presenting uncertainties in their risk assessment. This study assessed the toxicity of historical AFFFs by exposing human liver cells (HepG2) to various dilutions of 3M Light Water AFFF or Ansulite AFFF (0.001%, 0.002%, 0.005%, 0.009%, 0.019%, 0.038%, 0.075%, 0.15%, and 0.3%) for 24 h. The effects of the two AFFF formulations on the cell viability, intracellular reactive oxygen species (ROS) production, Nrf2-ARE activity, and DNA damage were assessed by CellTiter 96® Aqᵤₑₒᵤₛ One Solution Cell Proliferation Assay (MTS kit), dichlorofluorescein diacetate assay, luciferase assay, and alkaline Comet assay, respectively. The results revealed that the two brands of AFFFs tested were toxic to HepG2 cells at dilutions lower than the recommended 3% application formulation. Specifically, exposure to 3M Light Water AFFF or Ansulite AFFF induced a dilution-dependent decrease in cell viability, increased intracellular ROS production, and increased Nrf2-ARE activity. However, except for the highest concentration (lowest dilution) of 3M Light Water AFFF tested (0.038%.), both 3M Light Water AFFF and Ansulite AFFF did not significantly induce cellular DNA damage. Overall, 3M Light Water AFFF was more toxic than Ansulite AFFF. The findings from this study provided valuable in vitro toxicity data that may better inform the health risk assessment of these historical AFFFs.

Online monitoring of organic micropollutants (OMPs) in the aquatic environment at high temporal resolution is an upcoming technique that provides insights into their dynamics and has the potential to bring water research and management to a new level. An online monitoring setup was developed to quantify OMPs in wastewater treatment plant (WWTP) influent and effluent using automated and continuous sampling, sample preparation, online solid-phase extraction-liquid chromatography-tandem mass spectrometry analysis and data evaluation. This online monitoring setup provided high selectivity and sensitivity (limit of quantification down to 1 ng/L) as well as a stable performance during one week of constant operation whilst using a high sampling frequency of 10 min (>1000 samples). Custom automated data evaluation enabled quantification within seconds after each measurement and results were comparable to those from a commercial software. Additionally, an alarm tool was included in the evaluation application, which automatically notified the user in case a substance exceeded a predefined threshold. The online monitoring setup was applied to WWTP influent and effluent, where 57 substances were monitored over a period of one week and two days, respectively. High temporal resolution enabled the observation of periodic patterns of pharmaceuticals as well as pollution by OMPs originating from point and diffuse sources, while dynamics of OMPs in WWTP effluent were less pronounced. These new insights into the dynamics of OMPs in WWTP influent, which would not be observable using 24 h composite samples, will be a starting point for new stormwater and wastewater research and management strategies.

Seawater, sediments, and three genera of wild scleractinian corals were collected from four coral reef areas nearshore Liuqiu Island, southwestern Taiwan. Abundance, characteristics (sizes, colors, shapes, and polymer types), and enrichment of microplastics (MPs) in the corals, and their impacts on coral cover were determined. The average MPs abundances were 0.95, 0.77, and 0.36 item/g for Galaxea sp, Acropora spp, and Pocillopora sp, respectively. The MPs abundance was relatively higher on the coral surfaces than inside the skeletons, dominated by blue rayon-fibers, correspondingly observed in seawater and sediments. Large-size colorless MPs tended to be mis-ingested by Galaxea sp. (71%) compared with Pocillopora sp. (43%) and Acropora spp. (31%). The low hard coral cover (12.5%) observed at Yufu (L1) on the northeastern coastal zone nearby tourism center of Liuqiu Island where correspondingly associated with high MPs abundance in seawater (10 item/L), sediments (260 item/kg), and corals (0.60 item/g). Tourism induced sewage discharges and sailing activities significantly contributed to the MPs pollution, probably contributing to the loss of coral cover. High MPs enrichment in corals (EFMP = 25–283) shows that the marine MPs pollution can critically threaten coral reef ecosystems. Fibrous MPs present inside the coral skeleton serve as potential indicator of MPs’ impact on corals—with the dominance of textile-related rayon and polyester/PET microfibers in the coral reef zones. This study provided valuable information for coral conservation and coastal management.

Polycyclic aromatic hydrocarbons (PAHs) are hazardous toxic contaminants and considered as primary pollutants due to their persistent nature and most of them are carcinogenic and mutagenic. The key challenge in PAHs degradation is their hydrophobic nature, which makes them one of the most complex materials and inaccessible by a broad range of microorganisms. This bioavailability can be increased by using a biosurfactant. In the present study mixed PAHs were degraded using the biosurfactant producing bacterial strains. In addition, iron nanoparticles were synthesized and the impact of iron nanoparticles on the growth of the mixed bacterial strains (Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3) was optimized. The mixed PAHs (anthracene, pyrene, and benzo(a)pyrene) degradation was enhanced by addition of biosurfactant (produced by Bacillus subtilis A1) and iron nanoparticles, resulting in 85% of degradation efficiency. The addition of the biosurfactant increased the bioavailability of the PAHs in the aqueous environment, which might help bacterial cells for the initial settlement and development. The addition of iron nanoparticles increased both bacterial biomass and PAHs adsorption over their surface. These overall interactions assisted in the utilization of PAHs by the mixed bacterial consortia. This study illustrates that this integrated approach can be elaborated for the removal of the complex PAHs pollutants from soil and aqueous environments.

Cyanobacterial blooms are important environmental problems in aquatic ecosystems. Researchers have found that cyanobacterial blooms cannot be completely prevented by controlling and/or eliminating pollutants (nutrients). Thus, more in-depth basic research on the mechanism of cyanobacterial blooms is urgently needed. Cyanobacteria, being primordial microorganisms, provide habitats and have various forms of interactions (reciprocity and competition) with microorganisms, thus having a significant impact on themselves. However, little is known about how environmental conditions and microbial communities in both water and sediment jointly affect cyanobacterial blooms or about the co-occurrence patterns and interactions of microbial communities. We investigated changes in environmental factors and microbial communities in water and sediment during different cyanobacterial blooms and revealed their interacting effects on cyanobacteria. Cyanobacteria had greater competitive and growth advantages than other microorganisms and had antagonistic and aggressive effects on them when resources (such as nutrients) were abundant. Furthermore, microbial networks from cyanobacterial degradation periods may be more complex and stable than those from bloom periods, with more positive links among the microbial networks, suggesting that microbial community structures strengthen interconnections with each other to degrade cyanobacteria. In addition, we found that sediment-enriched cyanobacteria play a key role in cyanobacterial blooms, and sediment microorganisms promote the nutrient release, further promoting cyanobacterial blooms in the water bodies. The study contributes to further our understanding of the mechanisms for cyanobacterial blooms and microbial community structural composition, co-occurrence patterns, and responses to cyanobacteria. These results can contribute to future management strategies for controlling cyanobacterial blooms in freshwater ecosystems.

This study aims to investigate the effects of long-term nicosulfuron residue on an herbicide factory ecosystem. High-throughput sequencing was used to investigate the environmental microbial community structure and interactions. The results showed that the main contributor to the differences in the microbial community structure was the sample type, followed by oxygen content, pH and nicosulfuron residue concentration. Regardless of the presence or absence of nicosulfuron, soil, sludge, and sewage were dominated by groups of Bacteroidetes, Actinobacteria, and Proteobacteria. Long-term exposure to nicosulfuron increased alpha diversity of bacteria and archaea but significantly decreased the abundance of Bacteroidetes and Acidobateria compared to soils without nicosulfuron residue. A total of 81 possible nicosulfuron-degrading bacterial genera, e.g., Rhodococcus, Chryseobacterium, Thermomonas, Stenotrophomonas, and Bacillus, were isolated from the nicosulfuron factory environmental samples through culturomics. The co-occurrence network analysis indicated that the keystone taxa were Rhodococcus, Stenotrophomonas, Nitrospira, Terrimonas, and Nitrosomonadaceae_MND1. The strong ecological relationship between microorganisms with the same network module was related to anaerobic respiration, the carbon and nitrogen cycle, and the degradation of environmental contaminants. Synthetic community (SynCom), which provides an effective top-down approach for the critical degradation strains obtained, enhanced the degradation efficiency of nicosulfuron. The results indicated that Rhodococcus sp. was the key genus in the environment of long-term nicosulfuron exposure.