To improve domestic wastewater treatment for total nitrogen (TN) removal, a full-scale constructed wetlands combining an artificially aerated vertical- (AVCW) and a horizontal-flow constructed wetland (HCW) was completed in July 2007. The system covered a total area of 7,610 m². From 2 July 2007 to 7 August 2008, the treatment capacity was 2,076 m³ day⁻¹ with an aeration quantity of 7,400 m³ day⁻¹. The system effectively reduced the average annual output of BOD₅ (52.0 %), NH₄–N (58.41 %), and TP (41.61 %), although the percentage reductions of other pollutants, including chemical oxygen demand (34.1 %), suspended solid (38.9 %), and TN (31.05 %) were lower. The purpose of the HCW was for denitrification of the effluent from the AVCW, and annual average of 34.27 % of NO₃–N was removed compared with the reading at the AVCW outlet. With hydraulic loading increased to 4,152 m³ day⁻¹ from 9 September to 23 November 2007, the removal rate for NO₃–N from the HCW decreased substantially from 48.80 to 18.86 %. The total removal rates of NH₄–N showed significant positive correlation with DO content in the AVCW and with total TN removal rates for the combined system (P < 0.05). The study indicated that, even with limited artificial aeration, nitrification was very effective for NH₄–N removal.

Factors affecting preferential flow and transport in the vadose zone need to be investigated by experiments and simulations to protect groundwater against surface applied chemicals. The objectives of this study were to investigate the effects of several factors (soil structure, initial soil water content (SWC), and application rate) and their interactions on the extent of preferential flow and transport in a sandy clay loam field soil using the time domain reflectometry (TDR) for measuring SWC and electrical conductivity (EC) in 12 treatments, modeling (by HYDRUS-1D and VS2DTI) the measured SWC and EC, and conducting statistical tests for comparing the means of the measured and modeled SWC and EC and solute transport parameters (pore water velocity and dispersion coefficient) obtained by inversely fitting in the CXTFIT program. The study results showed that the applied solution moved faster in the undisturbed, wet initial SWC, and higher application rate experimental conditions than in the disturbed, dry initial SWC, and lower application rate, respectively, based on the analysis of the changes in TDR measured SWC and EC with depth at 1, 2, 5, and 15 h of the experiments. However, the effects of interactive factors or treatments on water flow and solute transport were not clear enough. The modeling results showed that HYDRUS-1D was better than VS2DTI in the estimation of EC and especially SWC, but overall the models had relatively low performances in the simulations. Statistical test results also showed that the treatments had different flow and transport characteristics because they were divided into different groups in terms of the means of SWC and EC and solute transport parameters. These results suggest that similar experiments with more distinct interactions and modeling studies with different approaches need to be considered for better understanding the complex flow and transport processes in the vadose zone.

Eight halophytic plant species, Avicennia marina, Avicennia alba, Bruguiera gymnorrhiza, Lumnitzera racemosa, Rhizophora mucronata, Rhizophora apiculata, Suaeda maritima, and Xylocarpus moluccensis were evaluated for the removal ability of total dissolved solids (TDS) from plastic industrial effluent. All halophytic plants could tolerate and survive when grown in wastewater with high TDS. Among the test plants, S. maritima showed the highest TDS removal capability and was selected for further study. S. maritima had ability not only for TDS removal, but also for reduction of pH, electrical conductivity, and salinity from wastewater effluent under soil conditions. S. maritima did not exhibit symptoms such as necrosis and leaf tip burn during the experimental period. These results indicated that S. maritima has tolerance to high TDS and salinity. However, S. maritima responded to high TDS stress by producing proline and total sugar in the roots, stems, and leaves which indicated that this plant can adapt to wastewater with high TDS. In addition, silicon (Si) and calcium (Ca) were increased in the leaves due to plant stress from TDS. Therefore, S. maritima is suitable halophytic plants for treatment of TDS contaminated wastewater.

Development of treatment technologies to alleviate water pollution has been a challenging and demanding task for researchers. Furthermore, synthetic dyes fabricated of complex aromatic structures turned out to be a great hazard as they impart color to water reservoirs making them abhorrent for human use. Reactive dyes being water soluble prove difficult to be eliminated by conventional treatment technologies. In recent times, biosorption has gained prominence as a finishing technology to remove pollutants being cost-effective and environment friendly. This paper describes the hazards posed by dyeing effluents, exclusively reactive dyes, on the environment and use of various biosorbents to remove reactive dyes from aqueous solution under optimum physicochemical parameters. Enhancement of biosorption capacity by chemical treatment and immobilization; equilibrium, kinetic and thermodynamic modeling of biosorption process; characterization by FTIR and SEM and regeneration of biosorbents is also plainly and comprehensively discussed.

Combinations of sequential anaerobic and aerobic process enhance the treatment of textile wastewater. The aim of this study was to investigate the treatment of diazo dye Reactive Black 5 (RB5)-containing wastewater using granular activated carbon (GAC)–biofilm sequencing batch reactor (SBR) as an integration of aerobic and anaerobic process in a single reactor. The GAC–biofilm SBR system demonstrated higher removal of COD, RB5 and aromatic amines. It was observed that the RB5 removal efficiency improved as the concentration of co-substrate in the influent increased. The alternative aeration introduced into the bioreactor enhanced mineralization of aromatic amines. Degradation of RB5 and co-substrate followed second-order kinetic and the constant (k 2) values for COD and RB5 decreased from 0.002 to 0.001 and 0.004 to 0.001 l/mg h, respectively, as the RB5 concentration increased from 100 to 200 mg/l in the GAC–biofilm SBR system.

We assessed the suitability of two nonnative poeciliid fishes—western mosquitofish (Gambusia affinis) and sailfin mollies (Poecilia latipinna)—for monitoring selenium exposure in desert pupfish (Cyprinodon macularius). Our investigation was prompted by a need to avoid lethal take of an endangered species (pupfish) when sampling fish for chemical analysis. Total selenium (SeTot) concentrations in both poeciliids were highly correlated with SeTot concentrations in pupfish. However, mean SeTot concentrations varied among fish species, with higher concentrations measured in mosquitofish than in mollies and pupfish from one of three sampled agricultural drains. Moreover, regression equations describing the relationship of selenomethionine to SeTot differed between mosquitofish and pupfish, but not between mollies and pupfish. Because selenium accumulates in animals primarily through dietary exposure, we examined fish trophic relationships by measuring stable isotopes (δ 13C and δ 15N) and gut contents. According to δ 13C measurements, the trophic pathway leading to mosquitofish was more carbon-depleted than trophic pathways leading to mollies and pupfish, suggesting that energy flow to mosquitofish originated from allochthonous sources (terrestrial vegetation, emergent macrophytes, or both), whereas energy flow to mollies and pupfish originated from autochthonous sources (filamentous algae, submerged macrophytes, or both). The δ 15N measurements indicated that mosquitofish and mollies occupied similar trophic levels, whereas pupfish occupied a slightly higher trophic level. Analysis of gut contents showed that mosquitofish consumed mostly winged insects (an indication of terrestrial taxa), whereas mollies and pupfish consumed mostly organic detritus. Judging from our results, only mollies (not mosquitofish) are suitable for monitoring selenium exposure in pupfish.

Phenol is a typical contaminant of the environment generated by many industries. Several fungi had been reported to degrade phenol as the only source of carbon and energy, but many of them are not useful to apply in soil bioremediation process. In this work, we study the dynamics of phenol degradation by a Penicillium chrysogenum, isolated from soil. Degradation of phenol was studied at room temperature and resting mycelium conditions. High specific degradation rates were obtained. Inhibition was observed on the specific growth rate (30 mg l1) and the degradation rate (200 mg l−1). Experimental results were fitted to several models during exponential phase, with the Andrews-Haldane model given the best fit. Dynamic mass balance equations for biomass and phenol during the exponential and stationary growth phases were solved and compared very satisfactorily to experimental outcomes. P. chrysogenum degrades phenol completely during the exponential and stationary growth phases. The results obtained are relevant for its practical applications in soil decontamination processes. Model predictions were satisfactory. This is the first work which describes a kinetic model for phenol biodegradation using a filamentous fungus considering both, exponential and stationary phases, and the first one in which a Penicillium isolate is used.

This work was undertaken to study the influence of soil type and its physical and chemical properties on uranium sorption and bioavailability, in order to reduce the uncertainty associated with this parameter in risk assessment models and safe food production. The tests were conducted on three types of Serbian soils: alluvium, chernozem, and gajnjaca, from which 67 samples were taken. Dominant factors of uranium mobilisation: the specific content of total/available form of uranium and phosphorus, the degree of acidity (pHKCl), and humus content and their correlation, were analysed. Content of available uranium form, according to the type of soil decreases in the following order: gajnjaca > alluvium > chernozem. It was found the medium correlation between pH values and available content of uranium in chernozem and gajnjaca, statistically significant at the level of significance of 99% and the alluvium at the level of significance of 95%. Correlation coefficients in all cases were negative, indicating that the reduction in pH increases the mobility of uranium and thus its availability for the adoption of the plants. Soil pH was the only dominant factor that significantly controlled the uranium value with no further significant contribution of other soil parameters.

Three different solventless sample preparation techniques based on microextraction, membrane extraction, and headspace extraction have been developed and optimized for determination of trihalomethanes in drinking water by gas chromatography electron capture detector and mass spectrometry detection. The techniques employed were headspace (HS) solid-phase microextraction, hollow fiber liquid-phase microextraction (HFLPME) and HS extraction. All techniques used were optimized with different experimental designs in order to select the most relevant variables which significantly affect the different processes. The different analytical figures of merit such as limit of detection (LOD), limit of quantification, reproducibility, accuracy, and linear dynamic range were obtained. The new HFLPME method applied used a hollow fiber membrane of polypropylene and the optimized variables were extraction time, extraction temperature, and salting-out effect. The software MODDE 6.0 was used and its design was one central composite on face with a total of 17 runs. The best conditions for the HFLPME were 20 min, 40°C, and 10% NaCl, respectively. The LODs ranged from 0.018 μg·L−1 (for CHClBr2) to 0.049 μg·L−1 (for CHBr3), being this technique the most sensitive one among those studied. Finally, after having optimized the sample preparation techniques and chromatographic conditions, several water samples were taken in two different water treatment plants in Spain (Zaragoza) and Colombia (Viterbo, Caldas). The results obtained are shown and discussed.

To evaluate plant responses and compare metal uptake by different plants, several parameters and references have been used by researchers in the last few years. However, they express only the first-level comparison, i.e. biogeochemical comparison of different media (plant and soil) occurs in one place, at the same time and under the same circumstances. To integrate information about metal concentration in different media or plant organ and provide comparison of the process between control and treated cases, the second-level factors, the dynamic factors, are needed. Differently from the factors mentioned in the existing literature, they are able to show changes in processes under environmental changes rather than changes only in metal quantities. They are related both to internal (physiological) and external (ecological) factors. The paper introduces the use of dynamic factors for assessment of transfer and translocation of metals (Zn, Pb, Ni, Mn, Cu and Cr) in Scots pine (Pinus sylvestris L.), silver birch (Betula pendula) and black alder (Alnus glutinosa). Factor values and their implications are discussed in the paper.