The objective of the study was to analyze measurements of the sires used in Latvian Warmblood (LWB) and Latvian Heavy Warmblood (LHWB) breeding programs in the period 2003 – 2017, two major horse populations in Latvia included in one studbook. The Latvian Warmblood has an open studbook for breeding sport horses, whereas the Latvian Heavy Warmblood is a partly closed studbook. Measuring information for all sires with at least one foal born (n=834) in the respective time period was retrieved from the Latvian horse database, with 673 stallions measured at least once. The data consisted of direct measurements – height at withers, chest circumference and cannon bone circumference – and two calculated indices – massivity index and boniness index. Average values of adult stallions were analyzed in four groups – LWB, LHWB, ‘other warmbloods’ and refining breeds, with LWB and ‘other warmbloods’ showing similar average values. Sires were divided by use in breeding into 3-year periods to observe a possible change in the breeding objective and stallion choice, however, no significant differences were found in LWB or LHWB. Average measurements of stallions used in the LWB breeding program (different breeds) were 168.6 ± 4.3 cm for height at withers, 194.4 ± 6.6 cm for chest circumference, 21.8 ± 1.0 cm for cannon bone circumference, massivity index 115.5 ± 3.1, boniness index 13.0 ± 0.5. Average measurements of stallions used in the LHWB breeding program (only LHWB stallions) were 167.6 ± 4.6 cm, 201.4 ± 7.3 cm, 23.7 ± 1.0 cm, respectively, and massivity index 120.0 ± 5.0, boniness index 14.1 ± 0.6. Significant differences between LWB and LHWB stallions were observed in all parameters, except height at withers, and between measurements at the age of 2, 3, 4 years and adult (5 and more years).

Farming outputs in agriculture depend on the nature of production, i.e. different farming systems generate different outputs. All these outputs are important for the society, and, therefore, require an integrated approach in view of the specific farming characteristics, where market and non-market outputs are taken into account. Therefore, the paper focuses on analysis of farming system outputs and methods of their evaluation. The objectives of this paper are to define the features of different farming systems and their outputs, then, to analyse the methods of evaluation of farming system outputs used in the studies. In order to achieve the research aim, analysis of economic scientific literature has been conducted; characteristics of farming systems and their outputs have been analysed; evaluation methods of the market and non-market farming system outputs, revealing their advantages and disadvantages, have been examined. Methods of systemic and logic analysis have been applied to analysis of the farming system outputs and their evaluation. The analysis has shown that intensive farming systems generate more market goods, while extensive farming systems – more public goods. Price-based methods are mostly used for the evaluation of market outputs of farming systems. Stated preferences methods are the most universal techniques used for the determination of the values from non-market farming system outputs. Hedonic pricing approaches are used for evaluation of specific agricultural public goods related to recreation or leisure and related to the particular groups of users.

Every day millions of new data records with spatial component are produced in the world, which provide valuable information to make decisions and solve business-related issues. However, a large part of this data is hardly analysed because of their different structures and schemas. The aim of the paper is to improve the integration, processing and analysis of unstructured spatial data. During the research, the author analysed geospatial data types and sources, explored NoSQL solutions for geospatial data processing and chose the open-source tools which are the most appropriate for the stated goals, as well as analysed the coverage of forest areas with protected zones using MongoDB database capabilities and visualized results in a map, using QGIS software. MongoDB is a useful tool for geospatial data analysis and has a large number of embedded topology analysis functions and has drivers for widespread programming languages like JavaScript, Python, PHP, Java, Scala, CNo., C, C + +, etc. QGIS has extensions that allow to make connections to databases, including a connection with MongoDB. Using these features, the developers can develop geographic information systems to analyse geospatial data – structured, semi-structured and unstructured. Generally MongoDB is used for real-time data analysis; however, complicated analysis of large data sets can take up to hours and even days, so it is still necessary to find the best solution to get results in an acceptable time for users. Using MongoDB together with Apache Hadoop – the framework to support big data applications – could be a possible solution for this problem.

This article presents theoretical and practical aspects of content marketing decisions for the customer value creation in social networks by using the case of the organic farm ʻIlzenberg manor’. Focus of this paper is to determine which content marketing decisions create the biggest value for the customer in social networks. The first part of the paper deals with theoretical insights into the content marketing decisions and their ability to create the customer value in social networks. Findings of theoretical analysis disclose that there are interfaces between content marketing, separate content marketing decisions and the customer value in the context of social networks. Respectively, it leads to an assumption that the usage of content marketing decisions can be valuable for the customer value creation in social networks. The second part of the paper focuses on the case analysis of the organic farm ‘Ilzenberg manor’. In order to determine which content marketing decisions create value for the customer in social networks, authors examine a correlation between separate content marketing decisions and consumer value indicators by using data from ʻIlzenberg manor’ Facebook page. The obtained results expose that not all content marketing decisions create value for the customer in social networks. Hence, it means that a selection of separate content marketing decisions in social networks can be made through the customer value perspective. The article ends with insights, conclusions, limitations and future research possibilities.

Norway spruce (Picea abies (L.) Karst.) is economically important tree species, vulnerable to impact of different biotic (cervids, bark beetle etc.) and abiotic (wind, wet snow etc.) factors and their combinations, expected to increase in frequency and/or magnitude in future due to climate changes. The aim of the study was to characterize occurrence damages in Norway spruce stands in Latvia. Data from 635 National forest inventory sample plots were used in the analysis, thus providing the information primarily on the non-lethal damages, since the dead trees in most of the cases would be removed from the stands in sanitary cuts. Damages were reported for 11.6 ± 1.1% of spruces from total basal area of spruces in the assessed pure and mixed stands. Admixture of other tree species or soil (group of forest types) had no significant effect on the proportion of damaged spruces. Also, no statistically significant differences in dimensions were observed between damaged and undamaged trees. The major cause of damages was browsing (three quarter of damaged spruces, in contrast to only one-quarter of the rest of the trees) and the highest proportion of damaged spruces were in stands in the age group 41 – 80 years, significantly differing from that in younger (up to 20 years) stands, demonstrating both the preferences of cervids to a certain dimensions of spruce as well as accumulation of damages over time.

Plywood overlaid with resin impregnated paper films is used in various decorative applications for which high stability of aesthetic qualities is of great importance. The top veneer of the plywood for these materials is perfectly protected from a direct contact with water as far as the covering film is not damaged. However, in case of film damage water can cause clearly visible defects in a relatively short period of time. To reduce these types of defects, unsophisticated and efficient way was developed. It involves filling the vessel system of the top veneer with industrial phenol-formaldehyde resin by using a hot-press. Influence of some phenol-formaldehyde resin properties on its penetration in birch veneer as well as the effect of wood moisture content were tested. The proposed top veneer pre-treatment method with phenol-formaldehyde resin reduced the average swelling zone distance from damage site by half for oven pre-dried plywood with 3% moisture content before treatment. Moreover, it was found that using plywood with moisture content of 9% the swelling zone distance was reduced by two thirds compared to untreated overlaid plywood.

In this study, antifungal properties of an organoclay additive were investigated. Two types of organoclay (red and white) were tested in Petri dishes to determine their toxicity against the brown rot fungus Coniophora puteana and the white rot fungus Trametes versicolor. Red organoclay was more efficient than the white one and, depending on the fungus, inhibited or stopped the fungal growth. Red organoclay was chosen as an additive to produce a new type of plywood product. Biological durability of this plywood product was determined according to the methods: NF B 51-295 (bending strength test) and LVS ENV 12038:2002 (mass loss test). The loss in bending strength exceeded 81% and 65% after exposure to brown and white rot fungi, respectively. The mass loss of the plywood product after the decay test was higher than 3%, which defined the material as not fully resistant against decay fungi. According to CEN/TS 15083-1:2005, the plywood product corresponded to the durability class 3 (moderately durable) to 5 (not durable) depending on the fungus.

Birch plywood has proved itself to be one of the most rational ways of wood processing. Growing demand of high performance birch plywood products requires a complex numerical analysis based on Finite Element Method (FEM), instead of using simple analytical assumptions, which prevent optimization of plywood construction (lay-up). In the research samples of birch plywood of several thicknesses, both sanded and non-sanded, with fibre direction of external veneer both in the longitudinal and transverse directions were tested. An extensometer and optical strain gauge were used for strain measurement. The FEM analysis, using commercial software SolidWorks Simulation Premium (SW), versus experimental bending and tension testing according to LVS EN 789 was carried out in this paper. The analysis of results indicates that there is a high correlation between the results of the experiments and the FEM. Particularly for in tension loaded specimens one can be tested up to the maximum ply strength (100 MPa); meanwhile, in bending up to 71MPa – the average stress in load bearing ply at the proportionality limit. Due to software restrictions, shear stresses cannot be evaluated. Future studies are considered to investigate terms for designing plywood with dynamic properties of strength and stiffness to be taken into account.

Green infrastructure (GI) is a strategically planned network of high quality natural and semi-natural areas and provides a range of ecosystem services and protects biodiversity in urban settings. It is very important to increase understanding of the role of GI from a scientific and a socio-economic perspective. The main goal was to understand and assess the ways that tourists use from experiencing urban green infrastructure in the cities they visit. An interview questionnaire survey took place among tourists of the following countries and cities: Latvia (Riga and Jelgava) and Portugal (Lisbon and Faro). The questionnaire includes perception, psychological aspects and preferences, behaviour and activities and general questions as well as biographical information about tourists. The study represents that no significant differences have been found between respondent groups in Latvia and Portugal. The results of the survey show that in future there is a need to improve the linkage between GI and social-cultural activities in cities. Therefore, studies for tourists’ perceptions, preferences and uses of GI will provide the alternative management approaches for urban planning and tourism development in future.

The aim of research was to determine peculiarities of relations between mature layer of the stand with distribution of spruce (Picea abies. Kr.) regeneration according phenology forms and growth specifics. The study examined the success of the resumption of spruce in the Leningrad region under the canopy of the parent stand. In stands with different share of spruce and in various forest-typological conditions, the features of the relationship between the maternal canopy of the stand, the distribution of the natural resumption of spruce by phenological forms and its course of growth were investigated. The account of the undergrowth was carried out by two methods: continuous reading and selective-statistical method. Regardless of the state of viability of spruce undergrowth, the increase in success of regeneration goes from a late vegetation season growth start form to an early one. Under the canopy of the maternal tree stand, young spruce of the early form has the best growth and development indices. In general, under the canopy of spruce stands, the annual height increment in spruce undergrowth, regardless of the phenological structure, the size categories and the state of viability, is greater than under the canopy of pine, pine-spruce and birch-spruce stands. The best characteristics of spruce undergrowth, regardless of phenological forms in vaccinio-myrtillo-pinetum type of forest are described. When analysing the characteristics of spruce undergrowth under the canopy of the stand, taking into account the phenological and altitudinal structure, and the state of viability, it was revealed that at the average age prevailing in the spruce undergrowth of the transitional form, the best parameters of growth have small and medium forms and growth in the early form. Analysing the characteristics of spruce undergrowth under the canopy of the stand, taking into account the phenological and height structure, as well as vitality status, it was revealed that at average age, dominating for the spruce undergrowth of transitional form, the best parameters of small and medium groups of undergrowth has early vegetation season growth start form. The best parameters of the growth have a large group of undergrowth of late vegetation season growth start form.