In the market of the Latvia different wood surface coating materials suitable for use in outdoor conditions are offered, but available information on the efficiency of these against direct water exposure is insufficient. For structural timber building elements, such as glued laminated timber (GLT), the surface coating should be applied taking into account technological, visual or colour changes (ISO 7724:1984) and – last, but not least – economic aspects are considered. Wood surfaces coated with coating materials, such as varnishes, paints, etc. can stabilize some properties such as movement of moisture content, dimensional changes and attack by microorganisms and fungi. The changes in the moisture content of timber may influence such important parameters as mechanical properties and the total life time of the structural timber elements. A study has been conducted with the aim of assessing the efficiency of coating materials used for wood protection against water absorption. In this study, six different commercial coating products used for the treatment of spruce (Picea Abies L. Karst.) and pine (Pinus Sylvestris L.) samples were tested. The efficiency of different coating substances was assessed using two modified test methods according to the standards EN 382-2 (1994) and EN 927-5 (2006), determining the surface water absorption after immersion in water for 24 h and the dynamics of water absorption of the glued laminated timber for 696 h kept in water. As a result of the study, it has been ascertained that organic solvent-based commercial coating products are more efficient against short-term and long-term wood water absorption compared to oil-based coating materials.

In the market of the Latvia different wood surface coating materials suitable for use in outdoor conditions are offered, but available information on the efficiency of these against direct water exposure is insufficient. For structural timber building elements, such as glued laminated timber (GLT), the surface coating should be applied taking into account technological, visual or colour changes (ISO 7724:1984) and – last, but not least – economic aspects are considered. Wood surfaces coated with coating materials, such as varnishes, paints, etc. can stabilize some properties such as movement of moisture content, dimensional changes and attack by microorganisms and fungi. The changes in the moisture content of timber may influence such important parameters as mechanical properties and the total life time of the structural timber elements. A study has been conducted with the aim of assessing the efficiency of coating materials used for wood protection against water absorption. In this study, six different commercial coating products used for the treatment of spruce (Picea Abies L. Karst.) and pine (Pinus Sylvestris L.) samples were tested. The efficiency of different coating substances was assessed using two modified test methods according to the standards EN 382-2 (1994) and EN 927-5 (2006), determining the surface water absorption after immersion in water for 24 h and the dynamics of water absorption of the glued laminated timber for 696 h kept in water. As a result of the study, it has been ascertained that organic solvent-based commercial coating products are more efficient against short-term and long-term wood water absorption compared to oil-based coating materials.

The growth data and the potential returns from 15-year-old plantations of pine Pinus sylvestris L. (6 trial sites), spruce Picea abies Karst L. (9 trial sites) and silver birch Betula pendula Roth (13 trial sites), established in abandoned agricultural lands in a variety of soil types (sod calcareous, anthrosols, podzolic, podzols, gley, podzolic gley, alluvial), using the planting density 2,500 and 3,300 and also 5,000 trees/ha are analysed. For tree plantations in agricultural soils (alluvial sod-gley, gley-sod podzolic, sod-podzolic gley, typic podzol) at the survival of 80-98% the stock volume for 15-year pine is as high as 102-155 m**3haE−1 with the volume growth 5.72-8.94 m**3haE−1 per year; the same indices for spruce in agricultural soils (gley sod-calcareous, sodpodzolic, cultivated, sod-podzolic gley, alluvial sod-gley, base-unsaturated brown) are 75-98 m**3haE−1 and 10.26-15.76 m**3haE−1, respectively. For 15-year plantation birch the mentioned indices may vary from 61 to 169 m**3haE−1 and from 7.54 to 29.82 m**3haE−1 per year. The lowest volume growth (4.66 m**3haE−1 per year) is for birch in heavy clay soil (gleyic sod-podzolic), the highest (29.72-29.82 m**3haE−1 per year) – in cultivated soils and pseudogley soil. Plantation cultivation of pine, spruce and birch in agricultural lands may by the age of 15 years yield with a profit such forest products as pulpwood, fire wood and woody biomass. The gross income gained from first commercial thinnings of plantation pine, utilizing pulpwood, fire wood and logging residue biomass, may vary from 679-2267 EUR haE−1, for spruce the same indices are 1644-3272 EUR haE−1, for birch - 683-2188 EUR haE−1.

The growth data and the potential returns from 15-year-old plantations of pine Pinus sylvestris L. (6 trial sites), spruce Picea abies Karst L. (9 trial sites) and silver birch Betula pendula Roth (13 trial sites), established in abandoned agricultural lands in a variety of soil types (sod calcareous, anthrosols, podzolic, podzols, gley, podzolic gley, alluvial), using the planting density 2,500 and 3,300 and also 5,000 trees/ha are analysed.For tree plantations in agricultural soils (alluvial sod-gley, gley-sod podzolic, sod-podzolic gley, typic podzol) at the survival of 80-98% the stock volume for 15-year pine is as high as 102-155 m³ha⁻¹ with the volume growth 5.72-8.94 m³ha⁻¹ per year; the same indices for spruce in agricultural soils (gley sod-calcareous, sodpodzolic, cultivated, sod-podzolic gley, alluvial sod-gley, base-unsaturated brown) are 75-98 m³ha⁻¹ and 10.26-15.76 m³ha⁻¹, respectively. For 15-year plantation birch the mentioned indices may vary from 61 to 169 m³ha⁻¹ and from 7.54 to 29.82 m³ha⁻¹ per year. The lowest volume growth (4.66 m³ha⁻¹ per year) is for birch in heavy clay soil (gleyic sod-podzolic), the highest (29.72-29.82 m³ha⁻¹ per year) – in cultivated soils and pseudogley soil.Plantation cultivation of pine, spruce and birch in agricultural lands may by the age of 15 years yield with a profit such forest products as pulpwood, fire wood and woody biomass. The gross income gained from first commercial thinnings of plantation pine, utilizing pulpwood, fire wood and logging residue biomass, may vary from 679-2267 EUR ha⁻¹, for spruce the same indices are 1644-3272 EUR ha⁻¹, for birch - 683-2188 EUR ha⁻¹.