Catalytic gasification of biomass (Miscanthus) enhanced by CO2 sorption

Zamboni, I.; Debal, M.; Matt, M.; Girods, P.; Kiennemann, A.; Rogaume, Y.; Courson, C.

Catalytic gasification of biomass (Miscanthus) enhanced by CO2 sorption

2016

The main objective of this work concerns the coupling of biomass gasification reaction and CO₂ sorption. The study shows the feasibility to promote biomass steam gasification in a dense fluidized bed reactor with CO₂ sorption to enhance tar removal and hydrogen production. It also proves the efficiency of CaO-Ca₁₂Al₁₄O₃₃/olivine bi-functional materials to reduce heavy tar production. Experiments have been carried out in a fluidized bed gasifier using steam as the fluidizing medium to improve hydrogen production. Bed materials consisting of CaO-based oxide for CO₂ sorption (CaO-Ca₁₂Al₁₄O₃₃) deposited on olivine for tar reduction were synthesized, their structural and textural properties were characterized by Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), and temperature-programmed reduction (TPR) methods, and the determination of their sorption capacity and stability analyzed by thermogravimetric analysis (TGA). It appears that this CaO-Ca₁₂Al₁₄O₃₃/olivine sorbent/catalyst presents a good CO₂ sorption stability (for seven cycles of carbonation/decarbonation). Compared to olivine and Fe/olivine in a fixed bed reactor for steam reforming of toluene chosen as tar model compound, it shows a better hydrogen production rate and a lower CO₂ selectivity due to its sorption on the CaO phase. In the biomass steam gasification, the use of CaO-Ca₁₂Al₁₄O₃₃/olivine as bed material at 700 °C leads to a higher H₂ production than olivine at 800 °C thanks to CO₂ sorption. Similar tar concentration and lighter tar production (analyzed by HPLC/UV) are observed. At 700 °C, sorbent addition allows to halve tar content and to eliminate the heaviest tars.

Afficher plus [+]