Effect of pilot hole diameter and tapping on insertion torque and axial pullout strength of 4.0-mm cancellous bone screws
2011
Kunkel, Kevin A. R. | Suber, Jonathan T. | Gerard, Patrick D. | Kowaleski, Michael P.
Objective—To evaluate the effects of pilot hole diameter and tapping on insertion torque and axial pullout strength of 4.0-mm cancellous bone screws in a synthetic canine cancellous bone substitute. Sample—75 synthetic cancellous bone blocks (15 blocks/group). Procedures—For groups 1 through 5, screw size-pilot hole diameter combinations were 3.5–2.5 mm (cortical screws), 4.0–2.5 mm, 4.0–2.5 mm, 4.0–2.0 mm, and 4.0–2.0 mm, respectively. Holes were tapped in groups 1, 2, and 4 only (tap diameter, 3.5, 4.0, and 4.0 mm, respectively). One 70-mm-long screw was inserted into each block; in a servohydraulic materials testing machine, the screw was extracted (rate, 5 mm/min) until failure. Mean group values of maximum insertion torque, axial pullout strength, yield strength, and stiffness were determined. Results—Mean maximum insertion torque differed significantly among the 5 groups; the group 5 value was greatest, followed by group 3, 4, 2, and 1 values. Group 3, 4, and 5 axial pullout strengths were similar and significantly greater than the group 2 value; all values were significantly greater than that for group 1. Group 5 and 4 yield strengths were similar and significantly greater than the group 3, 2, and 1 values. Stiffness in group 3 was similar to group 4 and 2 values but significantly greater than the group 5 value; all values were significantly greater than that for group 1. Conclusions and Clinical Relevance—These synthetic cancellous bone model findings suggested that tapping a 2.0-mm-diameter pilot hole when placing a 4.0-mm screw is the optimal insertion technique.
Afficher plus [+] Moins [-]Mots clés AGROVOC
Informations bibliographiques
Cette notice bibliographique a été fournie par National Agricultural Library
Découvrez la collection de ce fournisseur de données dans AGRIS