Monitoring and Modeling of Sand-Bentonite Cover for ARD Mitigation

Song, Qing; Yanful, Ernest K.

Monitoring and Modeling of Sand-Bentonite Cover for ARD Mitigation

2008

Song, Qing | Yanful, Ernest K.

This paper deals with field measurements and hydraulic, oxygen transport and geochemical speciation modeling undertaken to evaluate the performance of a sand-bentonite test cover overlying a 20% sloping waste rock platform. A pit run (gravelly sand) layer protected the sand-bentonite layer. The study site was the Whistle Mine near Capreol, Ontario, Canada. The purpose of the study was to evaluate a number of test covers and select a final cover for the decommissioning of 7 million tonnes of acid-generating waste rock at the site. The sand-bentonite test plot and a control plot consisting of waste rock without cover were monitored over 3 years for water content, suction, soil temperature, gaseous oxygen concentrations, and water percolation. Air temperature, rainfall, snow pack and potential evaporation were also monitored. Finite element modeling showed very good agreement between modeled and measured cumulative precipitation, daily potential evaporation and cumulative evaporation, and to a lesser extent, the cumulative water percolation through the test cover. Due to construction difficulties in the field, the back of the waste rock platform was not covered with the test cover. This resulted in oxygen ingress from the back side of the waste rock. Oxygen transport modeling showed that if the entire waste rock pile had been covered, the daily oxygen flux would have been reduced by 90% to only 0.003 g/m²/day. Such low oxygen flux would minimize sulphide oxidation and hence acid generation in the waste rock. Aqueous equilibrium speciation modeling suggested that the concentrations of sulphate [graphic removed] , iron (Fe), and aluminum (Al) in percolate water in contact with waste rock were controlled by secondary minerals such as gypsum, alunite, and ferrihydrite.

Afficher plus [+]