Exhaust Energy Recovery using Thermoelectric Power Generation from a Thermally Insulated Diesel Engine
2013
Karthikeyan, B. | Kesavaram, D. | Ashok Kumar, S. | Srithar, K.
Over two-thirds energy of fuel consumed by a diesel engine is discharged to the surroundings. The application of thermal barrier coatings reduces the heat losses through the engine cooling systems and increases the efficiency and exhaust energy. This energy available in the exit stream of the low heat rejection (LHR) engine goes waste, if not recovered. In the present work, the combustion chamber of a single cylinder diesel was coated with aluminum titanate. A waste heat recovery system was developed using a thermoelectric power generation module. Experiments were carried out on the conventional diesel engine and insulated (400-μm coating thickness on the cylinder head, valves and 300, 400, and 500-μm thicknesses on the piston top surface) diesel engine. The highest brake thermal efficiency of 26% was obtained with the 400-μm thickness of alumina-titania insulation in the combustion chamber, as compared with that of the standard engine. A maximum module efficiency of 2.87% was obtained with the 400-μm thickness insulation. A maximum of 20.6% of waste heat available in the exhaust was recovered at full-load condition with the insulation of 400-μm thickness.
Afficher plus [+] Moins [-]Mots clés AGROVOC
Informations bibliographiques
Cette notice bibliographique a été fournie par National Agricultural Library
Découvrez la collection de ce fournisseur de données dans AGRIS