EDEM Simulation Study on the Performance of a Mechanized Ditching Device for Codonopsis Planting

Codonopsis pilosula is cultivated mainly in sandy soils, especially in the Dingxi area of the Gansu province, northwest China. They are mainly planted in hilly areas, where large machines cannot reach easily. Codonopsis pilosula transplanting has been adopted with a conventional flat planting way, film mulching and seedling outcrops. While its planting requires opening a shallow ditch, short operation cycle, considerable labor intensity and is in large demand, a simulation analysis was performed according to specific tillage resistance, helpful in the optimization design in later stages and the improvement of a domestic ditching plow&rsquo:s performance. This paper studies the simulation performance of an adjustable trench plough and analyzes the orthogonal test and Design-Expert response surface of the data. EDEM simulation software was used to analyze the traction resistance of the furrow ditching mechanism in the ditching process. The results show that the traction resistance increased from 1751.31 N to 2197.31 N as the simulation working speed increased from 0.9 m/s to 1.5 m/s, 1.25 times higher than the former. It indicates that speed had significant effects on traction resistance. With the increase in working speed, the furrow traction resistance and specific consumed power were increased considerably. Using the stability coefficient of the ditching depth and consistency coefficient of ditching bottom width as test indices, speed and angle of furrowing as impact factors, Box&ndash:Behnken orthogonal experiment design method, and establishing test indices and test factors, the regression model between the analysis of the influence of the test index, comprehensive agronomic requirements and MATLAB factor optimization of the experiment, the optimized operation parameter combination was obtained: the forward speed was 0.9 m/s, the angle of ditching was 35&deg: and the stability coefficient of the ditching depth and consistency coefficient of ditch bottom width were 97.57% and 98.03%, respectively. The data after the simulation comparison test can provide a design reference for the domestic small trench operation.