Study on the Improvement of Temperature Resistance of Starch Drilling Fluid Treatment Agent by Composite Plant Phenols

Modified starch and other natural polymer materials have found extensive applications in drilling fluids. However, conventional modification methods offer limited scope for further enhancing their temperature resistance, typically with the applicable temperature being below 140 &deg:C. This paper presents the preparation of composite plant phenols using walnut shells, peanut shells, straw, and lignin, which are rich in the fundamental &ldquo:three elements&rdquo: of plants. To explore the improvement of the temperature resistance of cellulose-based drilling fluid additives, this study investigated the apparent viscosity, dynamic shear force, filtration performance, and adhesion coefficient of water-based drilling fluids supplemented with composite plant phenols. Additionally, the mechanism of action of the composite in drilling fluids was analyzed via infrared spectroscopy. The results revealed that the combined use of starch and composite plant phenols elevated the temperature resistance limit of starch from 160 &deg:C to 180 &deg:C. After aging at 180 &deg:C, the filtration loss of the drilling fluid formulation containing composite plant phenols dropped to 3.6 mL, while the apparent viscosity climbed from 3.1 mPa&middot:s to 13.6 mPa&middot:s. This clearly demonstrates the excellent high-temperature resistance and filtration-reducing capabilities of composite plant phenols. When the addition of cassava starch was 2%, the filtration loss of the drilling fluid system reached a minimum of 6.2 mL. A positively charged gel was identified as the optimal high-temperature-resistant cutting agent. At a dosage of 1%, the dynamic plastic ratio of the formulation increased from 0.51 to 2.11. Tannin extract emerged as the ideal high-temperature-resistant and environmentally friendly drilling fluid treatment agent. After its addition, the apparent viscosity of the drilling fluid system increased from 2.4 mPa&middot:s to 7.3 mPa&middot:s, and the filtration loss decreased from 140 mL to 14.6 mL.