Influence of Coarse Material on the Yield Strength and Viscosity of Debris Flows
2025
Nate Soule | Paul Santi
Two properties that are commonly used in the analysis of debris-flow motion and behavior are viscosity and yield strength: however, many of the techniques to measure these properties are tedious, highly theoretical, and use only the finer fraction of debris. The purpose of this study is to develop a practical and consistent method of determining the influence that coarse particles, up to 25.4 mm, have on the viscosity and yield strength of debris flows, using more accessible testing methods. Samples were tested at various sediment concentrations and with increasing maximum grain sizes of particles. Values for viscosity and yield strength of each mixture were measured and compared using four separate, previously derived laboratory tests: an inclined flume box, a slump test, a simple inclined plane, and a rolling sleeve viscometer. The slump test and rolling sleeve viscometer produced the most consistent and reasonable results, particularly as the maximum grain size was increased. In general, the sediment concentration required to produce a given yield strength increased as coarser particles were added to a slurry. While viscosity changes with grain size distribution, its variation can be predicted by sediment concentration alone. Both yield strength and viscosity could be predicted from the finer fraction of sediment, and a proposed method to predict the addition of coarse material is described. Including coarse material, yield strength and viscosity values are expected to be within 25 and 100%, respectively, of values measured by other methods.
Afficher plus [+] Moins [-]Mots clés AGROVOC
Informations bibliographiques
Cette notice bibliographique a été fournie par Multidisciplinary Digital Publishing Institute
Découvrez la collection de ce fournisseur de données dans AGRIS