Affiner votre recherche
Résultats 1-2 de 2
The Use of Raw and Thermally-Modified Calcareous Sludge Generated in Stone Cutting Industry for Sulfur Dioxide Removal
2019
Loghmani, F. | Mirghaffari, N. | Soleimani, M.
Management of solid wastes is considered as an economic and environmental issue in the building stone industry. The current study uses raw and calcined calcareous sludge, generated in the stone cutting factories, in order to remove sulfur dioxide. Sludge characterization has been performed, using X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) analyses. The removal experiments of sulfur dioxide have conducted under different humid contents and adsorbent doses. The results showed that the higher the adsorbent dosage and humidity content, the greater the SO2 adsorption.. The calcination process at temperatures of 400, 500, 600, and 700℃ revealed that with rising calcination temperature and humidity content, the adsorbent capability is enhanced considerably. This method could be developed for the management of stone sludge produced from the stone cutting industry through its conversion into an effective and low-cost adsorbent for desulfurization process.
Afficher plus [+] Moins [-]Adsorption and Leaching Behavior of Copper, Zinc and Lead Ions by Three Different River Nile Sediments at Aswan, Egypt
2019
Rashed, M.N. | Toufeek, M. E. F. | Eltaher, M. A. E. | Elbadry, A.O.
The present study was carried out to investigate the adsorption and leaching behavior of Cu2+, Zn2+ and Pb2+ by sediments collected from the western banks of three different sectors along River Nile at Aswan governorate, Egypt. The feasibility of sediments for the removal of Cu2+, Zn2+ and Pb2+ from aqueous solutions was tested under the effect of three conditions (pH, initial metal concentration and contact time). By increasing pH, the adsorption of Cu2+ and Pb2+ by sediments decreased while that of Zn2+ increased. The optimum pH values for Cu2+, Zn2+ and Pb2+ removal were determined as 5, 8.5 and 5, respectively. The adsorption capacities of sediments for metal ions were in the order of Pb2+ > Cu2+ > Zn2+. The maximum uptake for Cu2+, Zn2+ and Pb2+ by sediments occurred at contact times of 48 h, 24 h and 72 h, respectively. Adsorption data were fitted well by Freundlich, Dubinin–Radushkevich and Temkin isotherms. The experimental results obtained were analyzed using two adsorption kinetic models, pseudo-first-order and pseudo-second-order, in which pseudo-second-order equation described the data more than pseudo-first-order one. The average leaching percentages of Cu2+, Zn2+ and Pb2+ from sediments were 0.77%, 2.72% and 0.38%, respectively, with respect to pH, 0.83%, 2.49% and 0.38%, respectively , with respect to temperature, and also 0.79%, 2.34% and 0.38%, respectively with respect to contact time. The leaching percentages of metal ions from sediments were in the order of Zn2+ > Cu2+ > Pb2+.
Afficher plus [+] Moins [-]