Nanoscale zero valent iron (NZVI) was immobilized on the organobentonite (CTMA-bent), so as to enhance the reactivity of NZVI and prevent its aggregation. This novel composite (NZVI/CTMA-Bent) was characterized by transmission electron microscope and X-ray diffraction. Good dispersion of NZVI particles on the bentonite was observed. Its performance on removing pentachlorophenol (PCP) was investigated by batch experiments. Results showed NZVI/CTMA-Bent could rapidly and completely dechlorinate PCP to phenol with an efficiency of 96.2%. It was higher than the sum (54.5%) of reduction by NZVI (31.5%) and adsorption by CTMA-Bent (23.0%) separately. The kinetic studies indicated the removal rate of PCP was positively related to the adsorption. We proposed that the adsorption of PCP by CTMA-Bent enhanced the mass transfer of PCP from aqueous to iron surface. Besides, NZVI/CTMA-Bent exhibited good stability and reusability, and CTMA-Bent could also reduce the amount of iron ions released into the solution.

Granular bentonite has been assessed regarding its capacity to remove Hg(II), Cd(II) and Pb(II) from aqueous solutions. Sorption capacities, kinetics and the dependence of the sorption process on pH were determined. Fractional power, pseudo-first-order, pseudo-second-order and intra-particle diffusion equations were used to model the kinetics of metal adsorption. The pseudo-second-order model showed the best fit to experimental data. Different two-parameter sorption isotherm models (Langmuir, Freundlich, Temkin and Dubinin–Radushkevich) were used to fit the equilibrium data. Freundlich's isotherm model gave the best fit to experimental data. The selectivity of granular bentonite towards these metals is Pb(II) > Cd(II) > Hg(II). The adsorption capacities of granular bentonite towards the metals expressed in milligramme metal per gramme granular bentonite are 19.45, 13.05 and 1.7 for Pb(II), Cd(II) and Hg(II), respectively (for an initial concentration of 100 mg metal/L).