In this pilot-scale constructed wetland (CW) study for treating groundwater contaminated with benzene, MTBE, and ammonia-N, the performance of two types of CWs (a wetland with gravel matrix and a plant root mat) was investigated. Hypothesized stimulative effects of filter material additives (charcoal, iron(III)) on pollutant removal were also tested. Increased contaminant loss was found during summer; the best treatment performance was achieved by the plant root mat. Concentration decrease in the planted gravel filter/plant root mat, respectively, amounted to 81/99% for benzene, 17/82% for MTBE, and 54/41% for ammonia-N at calculated inflow loads of 525/603 mg/m²/d, 97/112 mg/m²/d, and 1167/1342 mg/m²/d for benzene, MTBE, and ammonia-N. Filter additives did not improve contaminant depletion, although sorption processes were observed and elevated iron(II) formation indicated iron reduction. Bacterial and stable isotope analysis provided evidence for microbial benzene degradation in the CW, emphasizing the promising potential of this treatment technique.

Receptor-oriented approaches can assess the individual-specific exposure to air pollution. In such an individual-based model we analyse the impact of human mobility to the personal exposure that is perceived by individuals simulated in an exemplified urban area. The mobility models comprise random walk (reference point mobility, RPM), truncated Lévy flights (TLF), and agenda-based walk (RPMA). We describe and review the general concepts and provide an inter-comparison of these concepts. Stationary and ergodic behaviour are explained and applied as well as performance criteria for a comparative evaluation of the investigated algorithms. We find that none of the studied algorithm results in purely random trajectories. TLF and RPMA prove to be suitable for human mobility modelling, because they provide conditions for very individual-specific trajectories and exposure. Suggesting these models we demonstrate the plausibility of their results for exposure to air-borne benzene and the combined exposure to benzene and nonane.

Increasing release of organic pollutants to the environment has caused one of the largest world crises for water resources. Volatile organic compounds are toxic monoaromatic pollutants of soil and water. In this research, natural zeolite nanoparticles were produced mechanically by means of a milling technique, modified using two cationic surfactants of hexadecyltrimethylammonium chloride and n-cetyl pyridinium bromide and formed as granules using a novel technique already developed by our group. The granulated adsorbents were used to uptake benzene, toluene, ethylbenzene, and xylenes (BTEX) from contaminated water. Two intra-particle diffusion models (i.e., Weber and Morris and Vermeulen models) and three surface reaction models (i.e., pseudo-first order, pseudo-second order, and Elovich) were applied to evaluate the kinetics of adsorption and the best fitted model was chosen. Results of the adsorption kinetic evaluations were shown that uptake of granulated nanozeolites are higher than natural zeolites (in the order of four). Kinetic results revealed that the adsorption follows a pseudo-second order indicating existence of chemisorption in the studied conditions. It was noticed that the intra-particle diffusion is prevailing in the first stage of adsorption for a relatively short time (i.e., first 25 min).

The present investigation was carried out to evaluate the detoxification potential of Pseudomonas fluorescens SM1 strain immobilized in calcium alginate beads for some major toxicants of Indian water bodies. The toxicants selected in this study were benzene hexachloride, mancozeb, 2,4-dichloro-phenoxyacetic acid (pesticides); phenol, catechol, cresol (phenolics); and Cd++, Cr(VI), Cu++ and Ni++ (heavy metals), which were taken as mixtures up to a concentration of roughly twice that usually found in highly polluted sites. Allium cepa phytotoxicity test, Ames fluctuation test and plasmid nicking assay were employed to estimate the phytotoxicity and genotoxicity of the model water containing the test toxicants under different combinations before and after exposure to our bioremediation-cum-detoxification system. The IC50 of the model water containing all the test toxicants, treated with the immobilized SM1 cells, was recorded to be 0.7× compared to 0.06× for the same but untreated water sample, enhancing the IC50 value by 12-fold. The IC25 of the test heavy metal mixture only could enhance from 0.07 to 1.30× (18-fold). The IC25 of the test pesticide mixture alone was increased from 0.07 to 1.71× (24-fold). The IC25 values for the mixture of test phenolics were 0.07× and 2.18× under the pre- and post-treatment conditions, respectively, exhibiting a 31-fold increase. A mutational induction (Mi) corresponding to the 0.5 value in the Ames fluctuation test was used to evaluate the mutagenicity of the test model water containing all the toxicants before and after exposure to the immobilized SM1 cell system. The Mi (0.5) value with the TA98 tester strain was estimated to be 0.08× for the untreated and 0.6× for the treated model water, whereas the same index was calculated to be 0.48× and 1.8×, respectively, for the TA100 strain. A remarkable improvement in the quality of the test water as a result of exposure to this bioremediating system was observed in terms of the absence of the linear form of the plasmid contrary to the visible linearization with the untreated model water. In view of the above findings, it is quite clear that the test of P. fluorescens SM1 strain immobilized in the calcium alginate beads could be used as an efficient system of bioremediation and for water decontamination strategies owing to its remarkable detoxification potential.

Petroleum monoaromatics including benzene, toluene, ethylbenzene, and xylenes (BTEX) are among the notorious volatile organic compounds that contaminate water and soil. In this study, a surfactant- modified natural zeolite and its relevant granulated nanozeolites were evaluated as potential adsorbents for removal of petroleum monoaromatics from aqueous solutions. All experiments performed in batch mode at constant temperature of 20°C and pH of 6.8 for 48 h. The results revealed that the amount of BTEX uptake on granulated zeolites nanoparticles were remarkably higher than the parent micron size natural zeolite (in the order of four times). The isotherms data were analyzed using five models namely, Langmuir, Fruendlich, Elovich, Temkin, and Dubinin–Radushkevich models. It was concluded that the Langmuir model fits the experimental data. The measured adsorption capacities were 3.89 and 4.08 mg of monoaromatics per gram of hexadecyltrimethylammonium-chloride and n-cetylpyridinium bromide (CPB)-modified granulated nanozeolite, respectively. Considering the type of surfactant, adsorbents modified with CPB showed greater tendency for the adsorption of the adsorbates.

Coal carbonization by-products contain up to 10,000 aliphatic and aromatic compounds. Many of them show toxic, mutagenic, and carcinogenic character. In this study, we examined 51 pure bacterial cultures of their ability of coal tar constituent biodegradation. Bacterial cultures were isolated from both explosives and coal tar-contaminated areas. Among all of the investigated strains, 19 showed biodegradative activity. One of the isolates degraded 40% of the substrate in 14 days at a temperature of 15°C. The most active strain was identified by both classic and 16S ribosomal DNA sequencing methods and designated Rhodococcus erythropolis B10. The biodegradation of coal tar constituents, performed by identified strain, was assessed by GC/MS technique. The comparison of samples analyzed by GC/MS before and after biodegradation indicated high degradative potential of the chosen strain. It was able to degrade n-paraffins, n-olefins, benzene, alkylbenzenes, cadalene, and other PAHs, as well as recalcitrant heterocyclic compounds dibenzofuran and its methyl-substituted derivative. The B10 strain isolated and tested in this research shows promising possibilities to be used in field conditions. The biodegradation experiments indicated that satisfactory results may be obtained even in pure bacterial cultures.

The aggregate potential health impact due to ambient volatile organic compounds on the population living in the area nearby the petrochemical industrial complex in Thailand was evaluated using measured air contaminants concentration. Airborne volatile organic compounds were collected using canisters and were analyzed by gas chromatography/mass spectrophotometer following the US.EPA TO 15 procedure. Composite samples taken over a 24-h period were collected monthly. Concentrations of volatile organic compounds (VOCs) were analyzed for a suite of 24 compounds covering both carcinogenic and non-carcinogenic substances. Results were determined and analyzed in order to evaluate their spatial variability and their potential health risk. Comparison of data from each monitoring site indicated that patterns of VOCs across sites were different from their major species and their concentrations which might be influenced by nearest potential emission sources. Carcinogenic VOCs such as benzene, 1,3butadiene, and 1,2 dichloroethane were found to be higher than their annual national standards. A potential cancer risk map was drawn based on benzene concentration in order to illustrate the zone of impact and the number in the population likely to be exposed. Results indicated that 82% of the total area, and 89.6% of the total population were within the impact area. It was suspected that high concentrations of benzene and 1,3 butadiene might be attributed by both the mobile source and the point source of emissions while 1,2 dichloroethane was suspected to be emitted from factories located upwind from the monitoring sites. Hazard quotients and hazard indexes were applied to determine chronic health effects with non-cancer endpoints. Calculated values of hazard indexes for each of the target organ systems were lower than 1, which indicated that the non-cancer chronic risk due to level of volatile organic compounds in the study area was less.

Aim of the study Helophytes like rush and reed are increasingly used for phytoremediation of contaminated water. This study characterises the response of rush and reed plants to chemical stressors such as chlorobenzene, benzene and methyl-tert-butyl ether. The extractable wax layer of the cuticle was chosen for detailed investigations due to its multiple, particularly, protective functions for plants and its easy availability for analysis. Methods The chemical composition of the cuticle wax layer of reed and rush was studied in dependence on chemical stress caused by contaminated water under wetland cultivation conditions. The lipid layer of leaves was extracted, derivatised and investigated by GC-MS using retention time locking and a plant-specific data base. Results In case of rush, a remarkable increase of the total lipid layer and a prolongation of the mean chain length resulted as response on a chlorobenzene exposure. The significant difference in the substance profiles of exposed plants and controls could be confirmed by multivariate data analysis. The lipid layer of reed was not changed significantly when the plants were exposed to water polluted with benzene and methyl-tert-butyl ether. However, scanning electron microscopic images of the exposed reed leaves indicated alterations in the crystal structure of their wax surface. Conclusion The composition and morphology of cuticular waxes indicated the plants' response to chemical stress very sensitively thus, changes in the wax layer could be used as an indication for growing in a contaminated area.