Owing to the habit of most of Yugoslavs to prepare coffee without filtering, the large part of used coffee comes to recipients. In this paper, the influence of coffee deposits reaching recipients in Yugoslavia is analyzed. Results of laboratory examination of the biodegradability and kinetic of biodegradability of coffee deposits are also presented.

India struggles with frequent exceedances of the ambient air quality standard for particulate matter and benzene. In the past two decades, India has made considerable progress in tackling indoor air pollution, by phasing out kerosene lamps, and pushing biofuel using households towards Liquefied Petroleum Gas (LPG) usage. In this study, we use updated emission inventories and trends in residential fuel consumption, to explore changes in the contribution of different sectors towards India's largest air pollution problem. We find that residential fuel usage is still the largest air pollution source, and that the <10% households using cow dung as cooking fuel contribute ∼50% of the residential PM₂.₅ emissions. However, if current trends persist, residential biofuel usage in India is likely to be phased out by 2035. India's renewable energy policies are likely to reduce emissions in the heat and electricity sector, and manufacturing industries, in the mid-term. PM₂.₅ emissions from open waste burning, on the other hand, hardly changed in the decade from 2010 to 2020. We conclude that without strong policies to promote recycling and upcycling of non-biodegradable waste, and the conversion of biodegradable waste to biogas, open waste burning is likely to become India's largest source of air pollution by 2035. While our study is limited to India, our findings are of relevance for other countries in the global South suffering from similar waste management challenges.

Since an invention of synthetic fibers (textiles), our life quality has been improved. However, the cumulative production and disposal of them have perceived as significant since they are not biodegradable and hard to be upcycled/recycled. From washing textiles, microplastics are released into the environment, which are regarded as emerging contaminants. As a means for source reduction of microplastics, this study proposed a rapid disposal platform for waste textiles (WTs), converting them into value-added products. To this end, catalytic pyrolysis of WT was studied. To offer more environmentally sound process, CO₂ was used as a raw material for WT pyrolysis. Thermal cracking of WT led to the production of syngas and CH₄ under the CO₂ environment. CO₂ resulted in additional CO production via gas phase reaction with volatile compounds evolved from pyrolysis of WT. To expedite the reaction kinetics for syngas formation, catalytic pyrolysis was done over Co-based catalyst. Comparing to non-catalytic pyrolysis, CO₂-assisted catalytic pyrolysis had 3- and 8-times higher production of H₂ and CO, respectively. This process also suppressed catalyst deactivation, converting more than 80 wt% of WT into syngas and CH₄. The more generation of CO from the use of CO₂ as a raw material offers an effective means to minimize the formations of harmful chemical species, such as benzene derivatives and polycyclic aromatic hydrocarbons.

Ionic liquids (ILs), also known as green solvents, are widely acknowledged in several fields, such as chemical separation, synthesis, and electrochemistry, owing to their excellent physiochemical properties. However, their poor biodegradability may lead to environmental and health risks, posing a severe threat to humans, thus requiring further research. In this study, the biotoxicities of the imidazolium-based ILs were evaluated in Tetrahymena pyriformis. Moreover, IL detoxification was investigated by addition of glutathione (GSH), cysteine, and nicotinamide adenine dinucleotide (NADH). Reactive oxygen species (ROS) initiated by different IL types caused damage to Tetrahymena, while glutathione, cysteine, and NADH eliminated ROS, achieving the detoxification purposes. Detoxification results showed that NADH exhibited the best detoxification ability, followed by glutathione and cysteine. Finally, RT-PCR results suggested that metallothionein might have participated in IL detoxification.

Microplastics have attracted much attention in recent years because they are able to interact with other pollutants including pesticides, with implications for the potential risks to biota. However, the sorption behavior of pesticides on microplastics, especially on biodegradable microplastics which are promising alternatives to conventional polymers, has been insufficiently studied. In this study, triadimefon and difenoconazole were selected as model triazole fungicides, and their sorption behavior on a typical biodegradable microplastics (PBS: polybutylene succinate) and two conventional polyethylene (PE) and polyvinyl chloride (PVC) microplastics was investigated with batch experiments in an aqueous solution. PBS presented the highest sorption capacity for triadimefon (104.2 ± 4.8 μg g⁻¹) and difenoconazole (192.8 ± 2.3 μg g⁻¹), which was 1.8- and 1.3-fold that on PE and 4.4- and 7.4-fold that of PVC, respectively. The results of sorption kinetic and isotherm modeling were better fit by a pseudo-second order model and linear model, respectively. More importantly, the effects of environmental factors (pH, salinity and dissolved organic matter) on the sorption behavior were investigated. Fungicide sorption on PBS was generally not affected by salinity, pH or dissolved organic matter. However, in contrast, salinity and dissolved organic matter both significantly decreased sorption on PE and PVC. The results showed that not only the sorption capacities of biodegradable microplastics but also their responses to environmental factors are quite different from those of conventional microplastics. This finding highlights the importance of the role played by biodegradable microplastics in the accumulation and transportation of organic pollutants.

Eutrophic freshwater lake ecosystems are receiving increasing public attention due to a global increase in large-scale harmful cyanobacterial blooms in surface waters. However, the contribution of phytodetritus accumulation in benthic sediments post-bloom remains unclear. In this study, field investigations were performed using microsensors to evaluate benthic phytodetritus mats by measuring TOC/TN ratios, pigments, biodegradable compounds and odorants as descriptive parameters. Results show that the massive amount of phytodetritus trapped by aquatic plants gradually evolved into benthic cyanobacterial detritus mats, which were characterized as anoxic, reductive and low pH. It was confirmed that the occurrence of odorants is more serious in the detritus mats due to decay and decomposition of the accumulated phytodetritus. The mean odorant content in the vegetated zones was 3–52 times higher than that in the unvegetated zones. The dominant odorants were dimethyl trisulfide (DMTS), β-ionone and β-cyclocitral, with mean contents of 52.38 ng·(g·dw)-1, 162.20 ng·(g·dw)-1 and 307.51 ng·(g·dw)-1, respectively, in the sediment. In addition, odorant production appears to be associated with the distribution of biodegradable compounds in the sediment. This is supported by the marked correlation observed between biodegradable compounds and odorants. Multiple regression analysis showed that biodegradable compounds can be used as indicators to predict odorant content in the sediment. It is noteworthy that the odorant trend in the water column and sediment is symmetrical, indicating a risk of diffusion from the sediment to the water column. This study helps to clarifying the contributions of benthic cyanobacterial detritus mats to odorant production in shallow eutrophic lakes. The information provided herein may also be useful for future management of aquatic ecosystems.

Microplastic pollution is a major global environmental problem in both aquatic and terrestrial environments. Pesticides are frequently applied to agricultural soil to reduce the effects of pests on crops, but may also affect the degradation of plastics. In this study, we generated microplastics from polyethylene (PE) film and biodegradable poly(butylene adipate-co-terephthalate) (PBAT) film and determined (1) the effect of prothioconazole on degradation of the microplastics, and (2) the adsorption and release characteristics of heavy metals (Cr, Cu, As, Pb, Ba, and Sn) by the microplastics during degradation process. Changes of surface functional groups and morphologies were measured by FTIR and SEM, while metal concentrations were determined by ICPMS. Prothioconazole was found to promote plastic degradation. PBAT degraded faster and adsorbed more heavy metals from the soil than PE. Whether the microplastics adsorb or release heavy metals depended on the metal and their concentrations. Prothioconazole inhibited the adsorption of Cr, As, Pb and Ba by microplastics, promoted the adsorption of Cu, and had no significant effect for Sn. These results can help to assess the ecological risk of microplastic pollution from plastic mulch when combined with heavy metals.

Biodegradable plastics have been introduced and widely used as a promising alternative to traditional nondegradable plastics. However, the differences in sorption behavior of pesticides on nondegradable and biodegradable microplastics has been insufficiently studied. Here, four types of nondegradable [polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), polypropylene (PP)] and two types of biodegradable [polylactic acid (PLA), polybutylene succinate (PBS)] microplastics were selected to investigate the sorption mechanism of fipronil based on their sorption kinetics and isotherms. The results indicated that the sorption rates of PLA and PBS were much higher than those of PE, PP, PVC and PS and that the sorption capacities of fipronil on microplastics followed the order of PBS > PLA > PP > PE > PS > PVC. The sorption kinetics followed a pseudo-second-order kinetics model (R² = 0.953–0.998) for all tested microplastics. External mass transport and intraparticle diffusion were the main rate controlling steps of the sorption of fipronil on microplastics. Furthermore, isotherm results indicated that a Langmuir model provided the best fit for fipronil sorption on PE, PS, PVC and PP (R² = 0.997–0.999), while a Freundlich model was the most appropriate model for PLA and PBS (R² = 0.998–0.999). The presence of surface O-containing functional groups and the spatial arrangement of rubbery domains are likely to affect the sorption process. The results from this work suggest that microplastics, especially biodegradable ones, may play an important role in the fate and transport of pesticides, and their effects on soil organisms (e.g., earthworms) require further investigation.

Although fertilization plays an important role in determining the contents of soil dissolved organic matters or water-extractable organic matter (DOM, WEOM), knowledge regarding the dynamics, biodegradability, and microbial community shifts of WEOM in response to different fertilization treatments is very limited, particularly in rice–wheat cropping soil. Thus, in the present study, we performed biodegradation experiments using WEOM extracted from samples of soil that had been subjected to four different fertilization treatments: unfertilized control (CK), chemical fertilizer (CF), 50% chemical fertilizer plus pig manure (PMCF), and 100% chemical fertilizer plus rice straw (SRCF). UV spectrum and fluorescence 3D excitation–emission matrix analyses applied to investigate the chemical composition of WEOM revealed that all examined WEOMs were derived from microbial activity and the dominant portion comprised humic acid-like compounds. After the incubation, 31.17, 31.63, 43.47, and 33.01% of soil WEOM from CK, CF, PMCF, and SRCF treatments, respectively, were biodegraded. PMCF- derived WEOM had the highest biodegradation rate. High-throughput sequencing analyses performed to determine the microbial community before and after the incubation indicated that Sphingomonas, Bacillus, and Flavisolibacter were the predominant bacterial genera in the original inoculum derived from the four fertilization treatments. Following biodegradation, we observed that the dominant bacteria differed according to fertilization treatments: Curvibacter (43.25%) and Sphingobium (10.47%) for CK, Curvibacter (29.68%) and Caulobacter (20.00%) for CF, Azospirillum (23.68%) and Caulobacter (13.29%) for PMCF, and Ralstonia (51.75%) for SRCF. Canonical correspondence analysis revealed that, shifts in the microbial community were closely correlated with pH and specific UV absorbance at 254 nm. We speculated that the inherent traits of different WEOM and the properties of soil solutions under different fertilization treatments shaped the soil microbial community structure, thereby influencing the biodegradation of WEOM.

Rapid urbanization and economic growth has led to significant increase in municipal solid waste generation in India during the last few decades and its management has become a major issue because of poor waste management practices. Solid waste generated is deposited into open dumping sites with hardly any segregation and processing. Carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) are the major greenhouse gases that are released from the landfill sites due to the biodegradation of organic matter. In this present study, CH₄ and CO₂ emissions from a landfill in north-east India are estimated using a flux chamber during September, 2015 to August, 2016. The average emission rates of CH₄ and CO₂ are 68 and 92 mg/min/m², respectively. The emissions are highest in the summer whilst being lowest in winter. The diurnal variation of emissions indicated that the emissions follow a trend similar to temperature in all the seasons. Correlation coefficients of CH₄ and temperature in summer, monsoon and winter are 0.99, 0.87 and 0.97, respectively. The measured CH₄ in this study is in the range of other studies around the world. Modified Triangular Method (MTM), IPCC model and the USEPA Landfill gas emissions model (LandGEM) were used to predict the CH₄ emissions during the study year. The consequent simulation results indicate that the MTM, LandGEM-Clean Air Act, LandGEM-Inventory and IPCC models predict 1.9, 3.3, 1.6 and 1.4 times of the measured CH₄ emission flux in this study. Assuming that this higher prediction of CH₄ levels observed in this study holds well for other landfills in this region, a new CH₄ emission inventory (Units: Tonnes/year), with a resolution of 0.1⁰ × 0.1⁰ has been developed. This study stresses the importance of biodegradable composition of waste and meteorology, and also points out the drawbacks of the widely used landfill emission models.