Antimony (Sb) widely occurs in plastics as a pigment and reaction residue and through the use and recycling of electronic material enriched in Sb as a flame retardant synergist. In this study, clean estuarine sediment has been contaminated by different microplastics prepared from pre-characterised samples of different types of plastic (including a rubber) containing a range of Sb concentrations (256–47,600 μg g⁻¹). Sediment-plastic mixtures in a mass ratio of 100:1 were subject to 6-h extractions in seawater and in seawater solutions of a protein (bovine serum albumin; BSA) and a surfactant (taurocholic acid; TA) that mimic the digestive conditions of coastal deposit-feeding invertebrates. Most time-courses for Sb mobilisation could be defined by a second-order diffusion equation, with rate constants ranging from 44.6 to 0.0216 (μg g⁻¹)⁻¹ min⁻¹. Bioaccessibilities, defined as maximum extractable concentrations throughout each time course relative to total Sb content, ranged from <0.01% for a polycarbonate impregnated with Sb as a synergist exposed to all solutions, to >1% for acrylonitrile butadiene styrene containing a Sb-based colour pigment exposed to solutions of BSA and TA and recycled industrial polyethylene exposed to BSA solution. The potential for Sb to bioaccumulate or elicit a toxic effect is unknown but it is predicted that communities of deposit-feeders could mobilise significant quantities of Sb in sediment contaminated by microplastics through bioturbation and digestion.

Plastic, and especially microplastic, contamination of soils has become a novel research field. After the detection of microplastics in soils, spatial distribution and dynamics are still unknown. However, the potential risks associated with plastic particles in soils cannot be sufficiently assessed without knowledge about the spatial distribution of these anthropogenic materials. Based on a spatial research approach, including soil surveys, this study quantified the mesoplastic (MEP, > 5.0 mm) and coarse microplastics (CMP, 2.0–5.0 mm) content of twelve floodplain soils. At four transects in the catchment area of the Lahn river (Germany), soils down to a depth of 2 m were examined for plastic content for the first time. MEP and CMP were detected through visual examination after sample preprocessing and ATR-FTIR analyses. Average MEP and CMP concentrations range between 2.06 kg⁻¹ (±1.55 kg⁻¹) and 1.88 kg⁻¹ (±1.49 kg⁻¹) with maximal values of 5.37 MEP kg⁻¹ to 8.59 CMP kg⁻¹. Plastic particles are heterogeneously distributed in samples. Both plastic size classes occur more frequently in topsoils than in soil layers deeper than 30 cm. The maximal depth of CMP occurrence lies between 75 and 100 cm. Most common CMP polymer type was PE-LD, followed by PP and PA. MEP and CMP particles occur frequently at near channel sides and more often on riparian strips or grassland than on farmland. Vertical distribution of CMP indicates anthropogenic relocation in topsoils and additional deep displacement through natural processes like preferential flow paths or bioturbation. By comparing sedimentation rates of the river with the maximum age of plastic particles, sedimentation as a deposition process of plastic in floodplains becomes probable. From our findings, it can be concluded that an overall widespread but spatial heterogenous contamination occurs in floodplain soils. Additionally, a complex plastic source pattern seems to appear in floodplain areas.

Metal flux measurements inform the mobility, potential bioavailability and risk of toxicity for metals in contaminated sediments and therefore is an important approach for sediment quality assessment. The binding and release of metals that contribute to the net flux is strongly influenced by the presence and behaviors of benthic organisms. Here we studied the effects of bioturbation on the mobility and efflux of metals from multi-metal contaminated sediments that inhabited by oligochaete worms or both worms and bivalves. Presence of bivalves enhanced the release of Mn, Co, Ni and Zn but not for copper and chromium, which is likely due to the high affinities of copper and chromium for the solid phase. Metals in the overlying water were primarily associated with fractions smaller than 10 kDa, and the fractionation of all metals were not affected by the presence of the bivalve. Metal fluxes attributed to different processes were also distinguished, and the bioturbation induced effluxes were substantially higher than the diffusive effluxes. Temporal variabilities in the total net effluxes of Mn, Co, Ni and Zn were also observed and were attributed to the biological activities of the bivalves. Overall, the present study demonstrated that the response of different metals to the same bioturbation behavior was different, resulting in distinct mobility and fate of the metal contaminants.

Sewage sludge contains Ag₂S-NPs causing NP exposure of soil fauna when sludge is applied as soil amendment. Earthworm bioturbation is an important process affecting many soil functions. Bioturbation may be affected by the presence of Ag₂S-NPs, but the earthworm activity itself may also influence the displacement of these NPs that otherwise show little transport in the soil. The aim of this study was to determine effects of Ag₂S-NPs on earthworm bioturbation and effect of this bioturbation on the vertical distribution of Ag₂S-NPs. Columns (12 cm) of a sandy loamy soil with and without Lumbricus rubellus were prepared with and without 10 mg Ag kg⁻¹, applied as Ag₂S-NPs in the top 2 cm of the soil, while artificial rainwater was applied at ∼1.2 mm day⁻¹. The soil columns were sampled at three depths weekly for 28 days and leachate collected from the bottom. Total Ag measurements showed more displacement of Ag to deeper soil layers in the columns with earthworms. The application of rain only did not significantly affect Ag transport in the soil. No Ag was detected in column leachates. X-ray tomography showed that changes in macro porosity and pore size distribution as a result of bioturbation were not different between columns with and without Ag₂S-NPs. Earthworm activity was therefore not affected by Ag₂S-NPs at the used exposure concentration. Ag concentrations along the columns and the earthworm density allowed the calculation of the bioturbation rate. The effect on the Ag transport in the soil shows that earthworm burrowing activity is a relevant process that must be taken into account when studying the fate of nanoparticles in soils.

Classical laboratory-based single-species sediment bioassays do not account for modifications to toxicity from bioturbation by benthic organisms which may impact predictions of contaminated sediment risk to biota in the field. This study aims to determine the effects of bioturbation on the toxicity of zinc measured in a standard laboratory bioassay conducted with chironomid larvae (Chironomus tepperi). The epi-benthic chironomid larvae were exposed to two different levels of sediment contamination (1600 and 1980 mg/kg of dry weight zinc) in the presence or absence of annelid worms (Lumbriculus variegatus) which are known to be tolerant to metal and to have a large impact on sediment properties through bioturbation.Chironomids had 5–6x higher survival in the presence of L. variegatus which shows that bioturbation had a beneficial effect on the chironomid larvae. Chemical analyses showed that bioturbation induced a flux of zinc from the pore water into the water column, thereby reducing the bioavailability of zinc in pore water to the chironomid larvae. This also suggested that pore water was the major exposure path for the chironomids to metals in sediment. During the study, annelid worms (Oligochaetes) produced a thin layer of faecal pellets at the sediment surface, a process known to: (i) create additional adsorption sites for zinc, thus reducing its availability, (ii) increase the microbial abundance that in turn could represent an additional food source for opportunistic C. tepperi larvae, and (iii) modify the microbial community’s structure and alter the biogeochemical processes it governs thus indirectly impact zinc toxicity.This study represents a contribution in recognising bioturbating organisms as “ecological engineers” as they directly and indirectly influence metal bioavailability and impact other sediment-inhabiting species. This is significant and should be considered in risk assessment of zinc levels (and other metals) in contaminated sediment when extrapolating from laboratory studies to the field.

The distinct spatial variability in microplastic concentrations between marine regions and habitats calls for a better understanding about the transport pathways of this omnipresent pollutant in the marine environment. This study provides empirical evidence that a sessile filter feeder, the Blue mussel M. edulis, accelerates microplastic deposition by aggregating them into sinking particulate faeces and pseudofaeces. After settling to the seafloor, the bioturbation of benthic fauna quickly buries these microplastics. Collectively, these results suggest that if such biologically-mediated benthic-pelagic coupling would be integrated into hydrodynamic transport models, the spatial variability and source-sink dynamics of microplastics would be better understood. It is proposed that microplastic pollution is monitored through sampling that takes into account faeces and pseudofaeces underneath filter feeders. The implications of this detrital pathway for microplastic transfer to the seafloor, and the role of shellfish mariculture in this process, are discussed. Studies that consider filter feeders and benthic communities from other regions, and during different seasons, are needed to validate the proposed biological pump mechanism across space and time.

Sediments serve as both source and sink of contaminants (e.g., Cu) and biologically important materials (e.g., metals, nutrients). Bioturbation by benthic organisms is ecologically relevant as bioturbation affects the physio-chemical characteristics of sediments, thus altering nutrient and contaminant distribution and bioavailability. We examined the effects of sediment-associated Cu on T. tubifex with conventional toxicity endpoints, such as mortality and growth, and less commonly used non-destructive endpoints, such as bioturbation and feeding. An experimental approach was developed to examine the applicability of simple methods to detect effects on bioturbation and feeding. Two experiments were conducted with 7-day exposures to uncontaminated or Cu-spiked natural sediment at six Cu concentrations to examine Cu bioaccumulation and effects. Endpoints included worm mortality, feeding rate and growth (experiment A) and worm bioturbation (particle diffusion and maximum penetration depth, experiment B). A microparticle tracer was placed on the sediment surface and vertical particle transport was followed over time. Adverse effects were detected for all endpoints (bioturbation, feeding rate, growth and survival): a slight positive effect at the lowest Cu concentrations followed by adverse effects at higher concentrations indicating hormesis. These simple, non-destructive endpoints, provided valuable information and demonstrated that sediment-associated contaminants, such as Cu, can influence bioturbation activity, which in turn may affect the distribution of sediment-bound or particulate pollutants, such as the plastic microparticles studied here. Thus, we suggest to use simple endpoints, such as bioturbation and feeding rate, in ecotoxicity testing since these endpoint account for the influence of interactions between pollutants and benthos and, thus, increase ecological relevance.

Evaluating the effects of anthropogenic pressure on the marine environment is one of the focal objectives in identifying strategies for its use, conservation and restoration. In this paper, we assessed the effects of chemical pollutants, grain size and plastic litter on functional traits, biodiversity and biotic indices. The study was conducted on the benthic communities of three harbours in the central Mediterranean Sea: Malta, Augusta and Syracuse, subjected to different levels of anthropogenic stress (high, medium and low, respectively). Six traits were considered, subdivided into 22 categories: reproductive frequency, environmental position, mobility, life habit, feeding habit and bioturbation. Functional diversity indices analysed were: Functional Divergence, Quadratic Entropy, Functional Evenness and Functional Richness. To assess the trait responses to environmental gradients, we applied RLQ analysis, which considers simultaneously the relationship between three components: environmental data (R), species abundances (L) and species traits (Q). From our analyses, significant relationships (P-value = 0.0018 for permutation of samples, and P-value = 0.00027 for permutation of species) between functional traits and environmental data were highlighted. The trait categories significantly influenced by environmental variables were those representing feeding habits and mobility. In particular, the first category was influenced by chemical pollutants (organotin compounds and polycyclic aromatic hydrocarbons) and grain size (silt and sand), while the latter category was influenced only by chemical pollutants.Pearson correlations performed for functional vs biotic and diversity indices confirmed the validity of the chosen conceptual framework for harbour environments. Finally, linear models assessing the influence of stressors on functional parameters underlined the link between environmental data vs benthic and functional indices. Our results highlight the fact that functional trait analysis provides a useful and fast method for detecting in greater depth the effects of multiple stressors on functional diversity in marine ecosystems.

Human activities introduce significant contamination into aquatic systems that impact biodiversity and ecosystem function. Many contaminants accumulate, and remediation options are now required worldwide. One method for bioremediation involves the application of macrofauna to stimulate microbial ecosystem processes including contaminant removal. However, if we are to confidently apply such a technique, we need clarity on the effect of bioturbators on different contaminants and how these vary under different environmental scenarios. Here we used a systematic review and meta-analysis to analyse current knowledge on the activities of bioturbating macrofauna in contaminated sediments and quantify how bioturbation-bioremediation changes depend on the taxonomic group, the aquatic ecosystem and important environmental variables. Three common contaminant classes were reviewed and analysed: metals, nutrients (i.e. ammonia and phosphorous) and polycyclic aromatic hydrocarbons (PAH). In addition, meta-regressions were calculated to estimate the effect of environmental and experimental design variables on effect sizes. Meta-analytic results revealed that deeper burrowing and more active sediment surface animals (e.g. polychaetes) increased metal release from sediments, nutrients and oxygen uptake by microbial fractions in comparison to bioturbators that inhabit shallower depths in sediments. In addition, there was a different effect of bioturbators on response variables in different aquatic systems. Finally, bioturbator effects on nutrient and metal release appeared modulated by context-specific variables such as temperature, pH, sediment grain size, animal density and experimental duration. Our findings highlight critical knowledge gaps such as field applications, less studied macrobenthic fauna and the incorporation of molecular approaches. Our results provide the first quantitative synthesis of the effects of bioturbators on contaminant fate and the variables that need to be considered for the optimization of this method as a viable approach for sediment remediation and contaminant management in aquatic systems.