The growth of transgenic canola (Brassica napus) expressing a gene for the enzyme 1-aminocyclopropane-1-carboxylate (ACC) deaminase was compared to non-transformed canola exposed to flooding and elevated soil Ni concentration, in situ. In addition, the ability of the plant growth-promoting bacterium Pseudomonas putida UW4, which also expresses ACC deaminase, to facilitate the growth of non-transformed and transgenic canola under the above mentioned conditions was examined. Transgenic canola and/or canola treated with P. putida UW4 had greater shoot biomass compared to non-transformed canola under low flood-stress conditions. Under high flood-stress conditions, shoot biomass was reduced and Ni accumulation was increased in all instances relative to low flood-stress conditions. This is the first field study to document the increase in plant tolerance utilizing transgenic plants and plant growth-promoting bacteria exposed to multiple stressors. Using transgenic plants and plant growth-promoting bacteria as phytoremediation methods increased plant tolerance at a metal-contaminated field site under low flood conditions.

Semivolatile organic compounds (SVOCs) represent a dominant category of secondary organic aerosol precursors that are increasingly included in air quality models. In the present study, an experimental system was developed and applied to a light-duty diesel engine to determine the emission factors of particulate SVOCs (pSVOCs) and nonvolatile particulate matter (PM) components at dilution ratios representative of ambient conditions. The engine was tested under three steady-state operation modes, using ultra-low-sulfur diesel (ULSD), three types of pure biodiesels and their blends with ULSD. For ULSD, the contribution of pSVOCs to total particulate organic matter (POM) mass in the engine exhaust ranged between 21 and 85%. Evaporation of pSVOCs from the diesel particles during dilution led to decreases in the hydrogen to carbon ratio of POM and the PM number emission factor of the particles. Substituting biodiesels for ULSD could increase pSVOCs emissions but brought on large reductions in black carbon (BC) emissions. Among the biodiesels tested, tallow/used cooking oil (UCO) biodiesel showed advantages over soybean and canola biodiesels in terms of both pSVOCs and nonvolatile PM emissions. It is noteworthy that PM properties, such as particle size and BC mass fraction, differed substantially between emissions from conventional diesel and biodiesels.

Heavy metals and emerging engineered nanoparticles (ENPs) are two current environmental concerns that have attracted considerable attention. Cerium oxide nanoparticles (CeO₂NPs) are now used in a plethora of industrial products, while cadmium (Cd) is a great environmental concern because of its toxicity to animals and humans. Up to now, the interactions between heavy metals, nanoparticles and plants have not been extensively studied. The main objectives of this study were (i) to determine the synergistic effects of Cd and CeO₂NPs on the physiological parameters of Brassica and their accumulation in plant tissues and (ii) to explore the underlying physiological/phenotypical effects that drive these specific changes in plant accumulation using Artificial Neural Network (ANN) as an alternative methodology to modeling and simulating plant uptake of Ce and Cd. The combinations of three cadmium levels (0 [control] and 0.25 and 1 mg/kg of dry soil) and two CeO₂NPs concentrations (0 [control] and 500 mg/kg of dry soil) were investigated. The results showed high interactions of co-existing CeO₂NPs and Cd on plant uptake of these metal elements and their interactive effects on plant physiology. ANN also identified key physiological factors affecting plant uptake of co-occurring Cd and CeO₂NPs. Specifically, the results showed that root fresh weight and the net photosynthesis rate are parameters governing Ce uptake in plant leaves and roots while root fresh weight and Fᵥ/Fₘ ratio are parameters affecting Cd uptake in leaves and roots. Overall, ANN is a capable approach to model plant uptake of co-occurring CeO₂NPs and Cd.

Rapidly growing global population adds significant strains on the fresh water resources. Consequently, saline water is increasingly tapped for crop irrigation. Meanwhile, rapid advancement of nanotechnology is introducing more and more engineered nanoparticles into the environment and in agricultural soils. While some negative effects of ENPs on plant health at very high concentrations have been reported, more beneficial effects of ENPs at relatively low concentrations are increasingly noticed, opening doors for potential applications of nanotechnology in agriculture. In particular, we found that cerium oxide nanoparticles (CeO2NPs) improved plant photosynthesis in salt stressed plants. Due to the close connections between salt stress tolerance and the root anatomical structures, we postulated that CeO2NPs could modify plant root anatomy and improve plant salt stress tolerance. This study aimed at testing the hypothesis with Brassica napus in the presence of CeO2NPs (0, 500 mg kg−1 dry sand) and/or NaCl (0, 50 mM) in a growth chamber. Free hand sections of fresh roots were taken every seven days for three weeks and the suberin lamellae development was examined under a fluorescence microscope. The results confirmed the hypothesis that CeO2NPs modified the formation of the apoplastic barriers in Brassica roots. In salt stressed plants, CeO2NPs shortened the root apoplastic barriers which allowed more Na+ transport to shoots and less accumulation of Na+ in plant roots. The altered Na+ fluxes and transport led to better physiological performance of Brassica and may lead to new applications of nanotechnology in agriculture.

Interest in selenium pollution and remediation technology has escalated during the past two decades. Although not known to be essential for plants, selenium is essential but could be toxic for humans and animals, depending on its concentration. A major selenium controversy in the 1980's emerged in California when the general public and scientific community became aware of selenium's potential as an environmental contaminant. After extensive research on several strategies to reduce loads of mobile Se for entering the agricultural ecosystem a plant-based technology, defined as 'phytoremediation' received increasing recognition, as a low-cost environmentally friendly approach for managing soluble Se in the soil and water environment. Successful long-term field remediation of Se by plants is, however, dependent upon acceptance and widespread use by growers, who are also concerned about potential commercial value from using the plant-based technology. Obtaining products with economic value from plants used in the cleanup of soil would certainly be an additional benefit to phytoremediation, which could help sustain its long-term use.

Harmful algal blooms (HABs) have induced severe damage worldwide. A novel high-efficient antialgal natural chemical, 3-indoleacrylic acid (3-IDC) with a 5-day half-maximal inhibitory concentration (IC₅₀, ₅d), was discovered from canola straw, and its algal inhibition mechanism was investigated. Adverse effects were observed on the growth of P. donghaiense with 3-IDC addition, following an increase in reactive oxygen species (ROS) production. 3-IDC also hindered the photosynthetic mechanism of P. donghaiense cells. Transcriptional results showed 3-IDC inhibiting the functions of all the nutrient assimilating genes, down-regulated ribulose-1,5-bisphosphate carboxylase/oxygenase II, and cytochrome f genes. The expression of heat shock protein (HSP) 70 and 90 and rhodopsin genes were also suppressed. The binding affinity of investigated receptors was observed. The conformational changes induced by the spatial microstructural alteration through 3-IDC may further contribute to the perturbation of those enzyme catalytic activities. The present results provide new insights on controlling HABs using 3-IDC.

Clopyralid is one of the synthetic pyridine-carboxylate auxin herbicides and used to control perennial and annual broadleaf weeds in wheat, sugar beets, canola, etc. In this study, dose-dependent cytotoxicity and genotoxicity of clopyralid at different concentrations (25, 50, and 100 μg/mL) have been evaluated on the Allium cepa roots. The evaluation has been performed at macroscopic (root growth) and microscopic levels [mitotic index (MI), chromosome aberrations (CAs) in ana-telophase cells, and DNA damage] using root growth inhibition, Allium ana-telophase, and comet tests. The percentage of root growth inhibition and concentration of reducing root growth by 50% (EC₅₀) of clopyralid were determined compared with the negative control by using various concentrations of clopyralid (6.25–1000 μg/L). The 96 h EC₅₀ of clopyralid was recorded as 50 μg/L. The gradual decrease in root growth and the MI reveals the cytotoxic effects of clopyralid. All the tested concentrations of clopyralid induced total CAs (polyploidy, stickiness, anaphase bridges, chromosome laggards, and disturbed ana-telophase) and DNA damage dose and time dependently. These results confirm the cytotoxic and genotoxic effects of clopyralid on non-target organism.

The current paper aimed at evaluating and optimizing the efficiency of energy use and mitigation of environmental pollution by minimizing the emissions and intensity of greenhouse gases (GHG) for farm production systems in Mashhad, Iran. The results indicated that the total values of consumed energy were equal to 28,648, 38,479, and 43,490 MJha⁻¹ for barley, canola, and forage corn, respectively. The highest rate of the consumed energy for all crops belonged to irrigation electricity, diesel fuel, and nitrogen consumption. The highest and lowest energy efficiencies were respectively achieved from forage corn and canola, while barley production led to the lowest GHG emissions. The estimation of GHG intensity demonstrated that canola with 53% took up the highest intensity, which was followed by barley (30%) and forage corn (17%). Since the intensity of GHG takes into account the amount of energy produced by each crop per hectare, this index is more suitable than GHG emissions for assessing environmental pollution. The results of optimal responses of the multiple goal programming (MGP) model revealed that the optimum evaluated cultivation areas (for meeting the goals of the study) for barley and forage corn were 10,088 and 3256 ha, respectively, while the MGP model generally eliminates canola from the cultivation plan. On the other hand, the plan proposed by the MGP model increases the total energy efficiency from 103,625 for the current systems to 105,169 for the optimized systems per year. Furthermore, the emissions and intensity of GHG were reduced by the model to 311,786 kgCO₂eq and 10 kgCO₂eq MJoutput⁻¹ per year, respectively.

The effects of elevated ozone (O₃) levels (80 ppb and 120 ppb) on photosynthetic efficiency and growth of canola plants were studied in open-top chambers. The chlorophyll a polyphasic fluorescence rise kinetics OJIP, stomatal conductance and Chlorophyll Content Index (CCI) were measured after 15 and 30 days of O₃ fumigation, as well as in control plants; biomass measurements were done only after 30 days with and without fumigation. Analysis of the OJIP kinetics by the JIP-test led to the calculation of several photosynthetic parameters and the total Performance Index (PIₜₒₜₐₗ). The decline of PIₜₒₜₐₗ under the 80 ppb O₃ treatment was due to a lower density of reaction centres (RC/ABS), while the notable decline under the 120 ppb treatment was found to be due both to a further decline of RC/ABS and to a pronounced lowering of the efficiency with which an electron can move from the reduced intersystem electron acceptors to the PSI end acceptors (δRₒ). Stomatal conductance was affected by both treatments. Biomass was found to be affected by O₃ fumigation (for 30 days), decreasing by 40% at 80 ppb and by more than 70% under 120 ppb. Our findings indicate that biomass decline is due both to the lowering of CCI and the lowering of photosynthetic efficiency parameters. They thus suggest that two simple, non-invasive and rapid methods, namely, the analysis of OJIP fluorescence transients and the measurement of CCI, can be used to screen the effect of elevated O₃ on biomass of canola plants.

Exploring and utilizing the agronomic potential of deep-underground is one of the ways to cope with the challenges of sudden environmental change on agriculture. Understanding the effects of environmental stresses on the morphological and physiological indicators of crop seeds after their storage deep-underground is crucial to developing and implementing strategies for agriculture in the deep-underground space. In this study, we stored canola seeds in tunnels with horizontal depths of 0, 240, 690, and 1410 m in a gold mine. Seeds in envelopes were retrieved at 42, 66, 90, and 227 days of storage, whereas seeds in sealed packages were retrieved at 66 and 227 days of storage. The germination tests were conducted to investigate the effects of storage depth, duration, and packing method on stored and non-stored seeds. Results showed that increased depth and duration reduced seed germination rate, with the germination and vigor indexes also descending to varying degrees. Increased hypocotyl length and biomass accumulation suggested that deep-underground environment had a more significant compensatory effect on seed germination. For all indicators, the performance of seeds sealed in packages was superior to those stored in envelopes. Regression analysis showed that it was difficult to obtain the optimal value of each indicator simultaneously. The successful germination experiment foreshadowed the possibilities of deep-underground agriculture in the future.