Environmental pollution by heavy metals (HMs) has raised considerable attention due to their toxic impacts on plants, animals and human beings. Thus, the environmental cleanup of these toxic (HMs) is extremely urgent both from the environmental and biological point of view. To remediate HMs-polluted environment, several nanoparticles (NPs) such as metals and its oxides, carbon materials, zeolites, and bimetallic NPs have been documented. Among these, Fe-based NPs have emerged as an effective choice for remediating environmental contamination, due to infinite size, high reactivity, and adsorption properties. This review summarizes the utilization of various Fe-based NPs such as nano zero-valent iron (NZVI), modified-NZVI, supported-NZVI, doped-NZVI, and Fe oxides and hydroxides in remediating the HMs-polluted environment. It presents a comprehensive elaboration on the possible reaction mechanisms between the Fe-based NPs and heavy metals, including adsorption, oxidation/reduction, and precipitation. Subsequently, the environmental factors (e.g., pH, organic matter, and redox) affecting the reactivity of the Fe-based NPs with heavy metals are also highlighted in the current study. Research shows that Fe-based NPs can be toxic to living organisms. In this context, this review points out the environmental hazards associated with the application of Fe-based NPs and proposes future recommendations for the utilization of these NPs.

Eating fish provides numerous health benefits, but it is also a dominant pathway for human exposure to contaminants. Many studies have examined mercury (Hg) accumulation in fish, but fewer have considered other elements, such as arsenic (As) and chromium (Cr). Recently, freshwater fish from several pristine boreal systems across northern Ontario, Canada, have been reported with elevated concentrations of As and Cr for reasons that are not well understood. Our goal was to investigate the ecological and environmental influences over concentrations of As, Cr, and other elements in these fish to better understand what affects metal uptake and the risk to consumers. We measured 10 elements (including As, Cr, Hg) as well as carbon (δ¹³C), nitrogen (δ¹⁵N), and sulfur (δ³⁴S) stable isotopes in 388 fish from 25 lake and river sites across this remote region. These data were used to determine the effect of: 1) trophic ecology; and 2) watershed geology on piscine elemental content. Overall, most element concentrations were low, often below provincial advisory benchmarks (ABs). However, traces of Hg, As, Cr, and selenium (Se) were detected in most fish. Based on their exceedance of their respective ABs, the most restrictive elements on fish consumption in these boreal systems were Hg > As > Cr. Arsenic and Se, but not Cr concentrations were related to fish size and trophic ecology (inferred from δ¹³C and δ¹⁵N), suggesting bioaccumulation of the former elements. Fish with enriched δ³⁴S values, suggestive of anadromous behaviour, had marginally lower Hg but higher Se concentrations. Modeling results suggested a strong effect of site-specific factors, though we found weak trends between piscine elemental content and geological features (e.g., mafic intrusions), potentially due to the broad spatial scale of this study. Results from this study address gaps in our understanding of As and Cr bioaccumulation and will help to inform fish consumption guidelines.

The soybean processing wastewater (SPW) supplementation to facilitate the simultaneously treatment (SPW and mesosulfuron-methyl) of wastewater and production of biological substances by Rhodopseudomonas sphaeroides (R. sphaeroides) was discussed. Compared with the control group, with the addition of SPW, mesosulfuron-methyl was removed, and the yields of single-cell proteins, carotenoids, and bacteriochlorophyll were increased. In the 3 mg/L dose group, the mesosulfuron-methyl removal rate reached 97% after 5 days. Molecular analysis revealed that mesosulfuron-methyl exhibited induction effects on expression of the cpm gene and regulation effects on the synthesis of cytochrome P450 monooxygenases (P450) by activating HKs gene in TCS signal transduction pathway. For R. sphaeroides, this induction process required 1 day. The synthesis of P450 occurred 1 day after inoculation. Prior to expressing cpm gene and synthesizing P450, R. sphaeroides need a period of time to adapt to external mesosulfuron-methyl stimulation. However, the R. sphaeroides growth could not be maintained for more than 1 day due to the lack of organic matter in the raw wastewater. The SPW supplementation provided a sufficient carbon source in four groups with added SPW. After 5 days, R. sphaeroides became the dominant microflora in the wastewater. This new method could complete the treatment of mixed wastewater, the increased of biological substances output and the reuse of wastewater and R. sphaeroides cells as resources at the same time.

Porous carbon, which can be functionalized, is considered as a potential carbon material. Herein, two-dimensional (2D) nitrogen-doped magnetic Fe₃C/C (NMC) was prepared by a simple carbonization method using potassium humate (HA-K) as raw material. Remarkably, two templates, g-C₃N₄ and KCl, were formed in situ during the carbonization process, which provide the necessary conditions for the formation of 2D NMC. The NMC was comprehensively studied by different characterization methods. The results show that NMC has a large surface area and mesoporous structure. The prepared NMC-0.50 was used to test the removal performance of Cr(VI). The effects of pH value, coexisting ions and time on Cr(VI) removal performance were investigated, and the adsorption kinetics, isotherm and thermodynamics were studied. The results showed that the adsorption isotherm model of NMC-50 accorded with the Langmuir model, and the maximum adsorption capacity was 423.73 mg g⁻¹. The reaction mechanism of Cr(VI) is adsorption and redox reaction. In addition, NMC-0.50 exhibit high selectivity, separability and regeneration performance. A convenient means for the synthesis of NMC was designed in this work, and demonstrate that NMC has practical value as an adsorbent.

Atmospheric levels of chlorinated paraffins (CPs) at five remote, six rural and four urban sites in Australia were measured using XAD-2 passive air samplers (XAD-PAS). While long-chain CP (LCCP, C>₁₇) levels were below method detection limits (MDLs), short-chain CPs (SCCPs, C₁₀₋₁₃) and, for the first time, medium-chain CPs (MCCPs, C₁₄₋₁₇) and CPs with a carbon chain length of nine (CP–C9) were found at many sites (88%, 81% and 88%, respectively) across the Australian continent, representing a range of environmental conditions. Applying preliminary sampling rates of the XAD-PAS for CPs, gaseous CP levels in Australian air were <MDL-1.3 and <MDL-1.8 ng/m³ for ΣSCCPs and ΣMCCPs, respectively, with a significant decreasing trend from more densely to less densely populated areas. Atmospheric median levels in this study (0.37 and 0.47 ng/m³ for SCCPs and MCCPs, respectively) were at the lower end of the median range (0.32–10 and 3.0–4.2 ng/m³ for SCCPs and MCCPs, respectively) reported for CPs at predominantly urban or industrial sites elsewhere (apart from China and extremely remote sites such as Antarctica). Principal component analysis matched the SCCP and MCCP congener group patterns in samples with those found in commercial mixtures, indicating a prevalence of less chlorinated congener groups in the Australian atmosphere. Information about the Australian production, use and disposal of CPs as well as their levels in other environmental matrices, including humans, is needed for assessing their emissions, behaviour, fate and potential exposure.

We investigated the profiles and levels of perfluoroalkyl carboxylic acids in edible clams from five fishing sites in Japan (Hokkaido, Himakajima-Aichi, Atsumi-Aichi, Kyoto, and Kumamoto) and one site in Vancouver, Canada in 2017. The mean concentrations of perfluoroalkyl carboxylic acids with 6–15 carbon atoms (C6–C15) in edible clams from Japanese coastal waters ranged from 197 to 1757 pg/g wet weight, but were only 48 pg/g wet weight in clams from the site in Canada. Total perfluoroalkyl carboxylic acid concentrations in clams collected in Japanese waters were 4–40 times higher than concentrations in clams from Canada. Perfluorooctanoic acid (C8) contributed 53% of total perfluoroalkyl carboxylic acid concentrations in the clams from Japanese waters, which may be contaminated from terrestrial sources though river effluents, but was not detected in the clam samples from Canada. Principal component analysis separated shorter- and longer-chain perfluoroalkyl carboxylic acids, suggesting differing emission sources or environmental fate. Consumption of clams may be an exposure pathway of perfluorooctanoic acid in the Japanese population.

Environmentally persistent free radicals (EPFRs) are receiving increasing concern due to their toxicity and ubiquity in the environment. To avoid restrictions imposed when using a high-volume active sampler, this study uses tree leaves to act as passive samplers to investigate the spatial distribution characteristics and sources of airborne EPFRs. Tree leaf samples were collected from 120 sites in five areas around China (each approximately 4 km × 4 km). EPFR concentrations in particles (<2 μm) on the surface of 110 leaf samples were detected, ranging from 7.5 × 10¹⁶ to 4.5 × 10¹⁹ spins/g. For the 10 N.D. samples, they were all collected from areas inaccessible by vehicles. The g-values of EPFRs on 68% leaf samples were larger than 2.004, suggesting the electron localized on the oxygen atom, and they were consistent with the road dust sample (g-value: 2.0042). Significant positive correlation was found between concentrations of elemental carbon (tracer of vehicle emissions) and EPFRs. Spatial distribution mapping showed that EPFR levels in various land uses differed noticeably. Although previous work has linked atmospheric EPFRs to waste incineration, the evidence in this study suggests that vehicle emissions, especially from heavy-duty vehicles, are the main sources. While waste incinerators with low emissions or effective dust-control devices might not be an important EPFR contributor. According to our estimation, over 90% of the EPFRs deposited on tree leaves might be attributed to automotive exhaust emissions, as a synergistic effect of primary exhausts and degradation of aromatic compounds in road dust. With adding the trapping agent into the particle samples (<2 μm), signals of hydroxyl radicals were observed. This indicates that EPFRs collected from this phytosampling method can lead to the release of reactive oxygen species (ROS) once they are inhaled by human beings. Thus, this study helps highlight EPFR “hotspots” for potential health risk identification.

The effective mineral absorption and bioreduction were considered as two preferred processes to alleviate the bioavailability and toxicity of toxic trace metals. In this study, the bioreduction of hexavalent chromium (Cr(VI)) on goethite (FeOOH) in the presence of Pseudomonas aeruginosa (P. aeruginosa) was investigated with different environmental factors, including carbon source concentrations, pH, temperature and initial Cr(VI) concentrations. The characterization of FeOOH–P. aeruginosa indicated that P. aeruginosa was surrounded by FeOOH, which could provide the essential iron for bacterial growth and reduce Cr(VI) to Cr(III). The optimal experimental conditions for Cr(VI) (initial concentration: 35 mg L⁻¹) absorption (∼46%) and bioreduction (∼54%) involved a temperature of 45 °C and pH of 5.5. Meanwhile, extracellular polymeric substances (EPS) secreted by P. aeruginosa and its functional groups played important roles in the reduction of Cr(VI). They could reduce Cr(VI) to Cr(III) and transform to Cr(OH)₃ or Feₓ-Cr₍₁₋ₓ₎(OH)₃ precipitation. These results of this study are of significant importance to better understand the environmental geochemical behavior of Cr(VI) with the interactions between soil minerals and microorganisms.

Estimates of the brown carbon (BrC) absorption and their contribution to light absorption in ambient aerosols are poorly understood. The existing approaches to apportion light absorption into black carbon (BC) and BrC mainly use the assumption of fixed angstrom absorption exponent (AAE) for BC (1.0), which is not always true for ambient aerosols. Besides, these estimates are seldom validated, leaving significant uncertainty with derived values. Also, BrC absorption studies are largely focused on aqueous extracts, which truly do not represent the aerosolized form, hence the relationship between aqueous extracts and aerosolized form is a subject of research. With this in mind, we collected ambient PM₂.₅ filter samples at Lumbini, Nepal, at the northern edge of the Indo-Gangetic Plains (IGP) during winter 2017-18. These samples were analyzed for different compositions of carbonaceous aerosol and optical properties. BC and BrC absorptions were derived using a preexisting simplified two-component model but with “improved conditions”. Although BC dominated spectral absorption, BrC contribution for the carbonaceous aerosol absorption increased substantially at ultraviolet wavelengths (example 14.8–53.6% at 365 nm). Further water-soluble BrC absorption value in aerosol was found to be higher by 1.8 times to that obtained in aqueous extracts. Water-soluble OC contributed ∼65% to OC loading and 50% to BrC absorption at 365 nm, indicated the equally important role of water-insoluble organics. Mass absorption efficiency (MAE) of water-soluble BrC in aerosol was found to be 1.7 m²/g, lower to water-insoluble by 2.2 times. High BC MAE was observed which showed positive dependence on secondary coating. Sample collected during events with fog droplets showed a reduction in carbonaceous components loading and light absorption but enhancement in MAE for BrC and BC, signifying that aqueous processing can significantly modify the aerosol optical properties.

Continuous measurements of Black Carbon (BC) aerosol mass concentrations were carried at Dehradun (30.33°N, 78.04°E, 700 m amsl), a semi-urban site in the foothills of north-westHimalayas, India during January 2011–December 2017. We reported both the BC seasonal variations as well as mass concentrations from fossil fuel combustion (BCff) and biomass burning (BCbb) sources. Annual mean BC exhibited a strong seasonal variability with maxima during winter (4.86 ± 0.78 μg m⁻³) followed by autumn (4.18 ± 0.54 μg m⁻³), spring (3.93 ± 0.75 μg m⁻³) and minima during summer (2.41 ± 0.66 μg m⁻³). Annual averaged BC mass concentrations were 3.85 ± 1.16 μg m⁻³ varying from 3.29 to 4.37 μg m⁻³ whereas BCff and BCbb ranged from 0.11 to 7.12 μg m⁻³ and 0.13–3.6 μg m⁻³. The percentage contributions from BCff and BCbb to total BC are 66% and 34% respectively, indicating relatively higher contribution from biomass burning as compared to other locations in India. This is explained using potential source contribution function (PSCF) and concentration weighted trajectories (CWT) analysis which reveals the potential sources of BC originating from the north-west and eastern parts of IGP and the western part of the Himalayas that are mostly crop residue burning and forest fire regions in India. The annual mean ARF at top-of-atmosphere (TOA), at surface (SUR), and within the atmosphere (ATM) were found to be −14.84 Wm⁻², −43.41 Wm⁻², and +28.57 Wm⁻² respectively. To understand the impact of columnar aerosol burden on ARF, the radiative forcing efficiency (ARFE) was estimated and averaged values were −31.81, −91.63 and 59.82 Wm⁻² τ⁻¹ for TOA, SUR and ATM respectively. The high ARFE within the atmosphere indicates the dominance of absorbing aerosol (BC and dust) over Northwest Himalayas.