In recent years, slagging-gasification technology has received increasing attention in treating municipal solid waste (MSW). Compared with conventional incineration, the higher temperature in the slagging-gasification process optimizes its residue composition, and gasification fly ash (GFA) is the only unreused solid residue. Although GFA is a potential civil engineering material, its high content of heavy metals, chlorides, and sulfates hinders its practical use. Moreover, although carbonation has proven to immobilize heavy metals in incineration fly ash, the conventional gas carbonation method cannot remove chlorides and sulfates. In this study, sodium bicarbonate (NaHCO₃) treatment was studied to treat GFA for the first time, and sodium carbonate (Na₂CO₃) was used for comparison. Different concentrations of NaHCO₃ and Na₂CO₃ solutions were used to treat the GFA, and comprehensive tests were conducted on the treated samples. The results indicated that NaHCO₃ treatment was effective in immobilizing Pb, Zn, Cu, and Ni in GFA, while Na₂CO₃ treatment could not effectively immobilize Pb and Zn. Both NaHCO₃ and Na₂CO₃ promoted the removal of chlorides and sulfates in GFA. The wastewater from the NaHCO₃ treatment contained fewer heavy metals compared with those from water washing or Na₂CO₃ treatment, benefitting its treatment or reuse.

Incineration technology has been widely employed, as an effective method to decrease the volume of waste disposal. In this review, relationships between municipal solid waste (MSW) inputs and residues after combustion―specifically, the incineration bottom ashes (IBA) of MSW, were discussed, with an emphasis on the geoenvironmental impacts of IBA associated with the complex crystal and amorphous phase reactions and changes during combustion and from their downstream treatments, whereas, their influences on IBA leaching behaviors are considered as another focus. This review summarizes the IBA leaching behaviors based on literature, showing the leaching variabilities induced by natural weathering and artificial intervention conditions, such as accelerated carbonation, washing treatment, stabilization/solidification, and thermal treatments, all of which can be attributed to changes of mineral phases and microstructure. It helps to understand IBA characteristics and transitions in application-environment nexus, and better reuse it for multiple applications.

Cement-solidification and chelator-stabilisation of municipal solid waste incineration fly ash (MSWI-FA) are two main treatment techniques to immobilise heavy metals. Differences in the long-term stabilities of those two methods of heavy-metal immobilisation were explored to aid in determining the better MSWI-FA treatment. However, few comparative studies have been conducted on 6-year-old cement-solidified FA (Ce-6-FA) and chelator-stabilised FA (Ch-6-FA). In this study, we compared the physicochemical and heavy metal leaching characteristics of Ce-6-FA and Ch-6-FA. The chemical speciation of heavy metals was modelled using geochemical software to assess long-term stability. The results showed weaker long-term stability in Pb immobilisation under the chelating system. The leaching concentrations of target heavy metals, acetic acid leaching tests, acid neutralising capacity, and pH-dependent leaching results indicated that Ce-6-FA had higher long-term stability than Ch-6-FA. A column experiment indicated that the cumulative release rates of Pb in Ce-6-FA and Ch-6-FA were 2.49% and 4.72%, respectively. The phase-controlled leaching of Pb in Ce-6-FA mainly occurred through Pb2(OH)3Cl and chloropyromorphite (Pb5(PO4)3Cl), whereas that in Ch-6-FA mainly occurred through Pb5(PO4)3Cl. The decomposition of heavy metal chelates in Ch-6-FA and salt generation in this process led to the release of Pb via the inorganic complex.

Carbon capture has become an important technology to mitigate ever-increasing CO₂ emissions worldwide, and alkali waste is a potential source of CO₂ capture material. Slagging-gasification is a novel technology for treating municipal solid waste (MSW), and the gasification fly ash (GFA) is the only solid residue that is not reused at present due to its high heavy metal content. GFA contains high amounts of Ca(OH)₂ and Ca(OH)Cl, making it protentional for CO₂ capture. In this study, GFA and washed gasification fly ash (WGFA) were treated with CO₂ for different treatment periods. Weight changes of samples were recorded to evaluate the efficiency of CO₂ capture. To assess the properties of treated GFA, pH value, leached heavy metal concentration, mineral composition, and microscopic morphology were studied. The results revealed that GFA and WGFA could adsorb 18.8% and 23.7% CO₂ of their weights, respectively. Carbonation could immobilize heavy metals including Pb, Zn, and Cu when a proper treatment period was applied. An excessive treatment period decreased the efficiency of heavy metal immobilization. Pre-washing is recommended as a pre-treatment method for GFA carbonation, which increased the efficiency to adsorb CO₂, improved the pH of carbonated GFA, and enhanced the effect to immobilize heavy metals.

Biochar is a porous carbonaceous material with high alkalinity and rich minerals, making it possible for CO2 capture. In this study, biochars derived from pig manure, sewage sludge, and wheat straw were evaluated for their CO2 sorption behavior. All three biochars showed high sorption abilities for CO2, with the maximum capacities reaching 18.2–34.4 mg g−1 at 25 °C. Elevating sorption temperature and moisture content promoted the transition of CO2 uptake from physical to chemical process. Mineral components such as Mg, Ca, Fe, K, etc. in biochar induced the chemical sorption of CO2 via the mineralogical reactions which occupied 17.7%–50.9% of the total sorption. FeOOH in sewage sludge biochar was transformed by sorbed CO2 into Fe(OH)2CO3, while the sorbed CO2 in pig manure biochar was precipitated as K2Ca(CO3)2 and CaMg(CO3)2, which resulted in a dominant increase of insoluble inorganic carbon in both biochars. For wheat straw biochar, sorbed CO2 induced CaCO3 transformed into soluble Ca(HCO3)2, which led to a dominant increase of soluble inorganic carbons. The results obtained from this study demonstrated that biochar as a unique carbonaceous material could distinctly be a promising sorbent for CO2 capture in which chemical sorption induced by mineralogical reactions played an important role.

MgO-based absorbent has been recognized as a promising CO₂ absorbent at intermediate temperature, though the carbonation performance of pure MgO is poor. Researchers have been devoted to optimize the CO₂ absorption ability via introducing alkali metal carbonates or nitrates. In this paper, the absorption performance of MgO-based absorbents promoted by alkali metal carbonates or modified by alkali metal nitrates has been summarized, and the affecting mechanism has been concluded. Alkali metal nitrates are essential for high absorption ability, and alkali metal carbonates facilitate high-temperature carbonation. Effects of fuel gas conditions and absorbent pelletization are also mentioned for practical applications. H₂O can accelerate the carbonation rate effectively, but the influencing mechanism of H₂O and the CO₂ absorption stability in presence of H₂O was not clearly reported. Further investigations on pelletized MgO-based absorbents modified by alkali metal salts considering regeneration conditions of high CO₂ concentration are proposed based on the recent research findings.

CO₂ uptake due to carbonation is an important issue for sustainability in the concrete industry. This study presents an analysis model of CO₂ uptake of slag-blended concrete considering the service stage and the recycling stage. First, a slag-blended cement hydration model is used to evaluate the content of carbonatable substances, porosity, and diffusivity. Regarding the service stage, a one-dimensional carbonation model is proposed to evaluate carbonation depth. For the recycling stage, an unreacted core model is proposed to evaluate the carbonation fraction of crushed, spherical concrete. Second, CO₂ uptake in the service stage and recycling stage is determined based on the carbonated fraction, shape of the concrete element, concrete component, and exposure conditions. The total CO₂ uptake ratio is determined based on the content of CO₂ uptake and CO₂ emissions. Third, the analysis results show that for concrete with a water-to-binder ratio of 0.3, as the slag replacement ratio increases from 0 to 50%, the total CO₂ uptake ratio increases from 21.43 to 28.87%. For concrete with 50% slag as the binder, as the water-to-binder ratio increases from 0.30 to 0.35, the total CO₂ uptake ratio increases from 28.87 to 30.59%. The sizes and types of the structural elements and the diameter of the crushed concrete can impact the rate of CO₂ uptake, but do not modify the total CO₂ uptake ratio.

The application of three simple and cost-effective technologies for ex situ remediation of the sediment of Begej River in Serbia is presented in this paper. In the first step, conventional electrokinetic treatment (EK) was carried out to reduce the amount of contaminated sediment and enhance the accumulation of metals. Subsequently, stabilization/solidification (S/S) treatment was applied to the remaining portion of polluted sediment to immobilize the accumulated metals. At the same time, the influence of accelerated carbonation on the effectiveness of the treatment was evaluated. The immobilizing agents used in this study included bio ash produced by combustion of wheat and soy straw mixture and bio ash derived from molasses incineration. After the treatments, the risk assessment was performed by using the sequential extraction procedure (SEP) and TCLP and DIN 3841-4 S4 leaching tests. The results obtained after the EK treatment revealed a reduction in the amount of polluted sediment to a half. Leaching tests and SEP performed on S/S mixtures after a 28-day maturation period indicated that accelerated carbonation decreased the mobility of critical metals, especially in wheat and soy straw mixtures. Moreover, based on the leaching tests, all prepared mixtures were categorized as non-hazardous and safe for disposal according to the relevant Serbian regulations. The newly developed method that combines EK and S/S treatments with the addition of accelerated carbonation produced reduced volumes of stabilized sediment which is safe for disposal.

Chemicals leached from concrete are an important way that urban stormwater can influence water quality. In this study, we evaluated the weathering properties of sidewalk samples and tested how carbonation (exposure to elevated levels of gaseous CO₂) can be used to simulate natural aging of concrete. The experiments focused on acid neutralizing capacity (ANC), which is known to be released by concrete in large amounts, and Cr(VI), because of its established carcinogenicity and prevalence in concrete. Chemical weathering of crushed sidewalk samples was measured with upflow recirculating columns carrying simulated acid rain. The weathering rate of ANC from four different samples was found to decrease after 1 week of exposure to a 5% carbon dioxide atmosphere and to remain constant thereafter through 8 weeks of carbonation treatment. In contrast, weathering of chromium (VI) increased after exposure to a 5% carbon dioxide atmosphere for 1 week, though it also remained stable from then through 8 weeks of carbonation. Almost all ions approached steady state after 2.5 h in the recirculation columns irrespective of carbonation time. The main contributor of ANC was Ca²⁺ ion, though this was partly balanced by an unexpectedly high amount of SO₄²⁻. A notable exception to the temporal leaching pattern was largely un-ionized Si, which continued to increase in concentration for at least 3 days of recirculation. Si levels were also higher than is generally observed for aluminosilicate weathering in small watersheds, a novel finding.

Using aluminum nitrate (AlN) and bauxite tailings (BTs) as different dopants, and lime mud (LM) as calcium source, a series of CaO-based sorbents were prepared for CO₂ capture by dry mixing method; then, the carbonation conversions of multiple carbonation/calcination cycles were detected in a thermogravimetric analyzer (TGA). Effects of different dopants, dopant contents, precalcination conditions, and a long series of cycles on CO₂ absorption properties were scrutinized, and the phase composition and morphologies were tested by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Durability studies show that the sample doped with AlN remains a higher absorption conversion (30.88%) after 30 carbonation/calcination cycles. In the meantime, the sorbent doped with BTs showed a lower conversion, which is probably resulted from the impurities from waste BTs. However, the sample BT has a better cyclic absorption stability. In addition, the incorporation of BTs, as a kind of solid waste, not only decreases the preparation cost but also is good for environment. The occurrence of Ca₁₂Al₁₄O₃₃ phase is considered to provide a stable framework inhibiting inactivation of CaO, and improve the CO₂ adsorption stability. Graphical abstract ᅟ