This work tested a new remediation technology for in-situ degradation of estrogens by delivering a new class of stabilized manganese oxide (MnO2) nanoparticles in contaminated soils. The nanoparticles were prepared using a food-grade carboxymethyl cellulose (CMC) as a stabilizer, which was able to facilitate particle delivery into soil. The effectiveness of the technology was tested using 17β-estradiol (E2) as a model estrogen and three sandy loams (SL1, SL2, and SL3) as model soils. Column transport tests showed that the nanoparticles can be delivered in the three soils, though retention of the nanoparticles varied. The nanoparticle retention is strongly dependent on the injection pore velocity. The treatment effectiveness is highly dependent upon the mass transfer rates of both the nanoparticles and contaminants. When the E2-laden soils were treated with 22–130 pore volumes of a 0.174 g/L MnO(2) nanoparticle suspension, up to 88% of water leachable E2 was degraded. The nanoparticles were more effective for soils that offer moderate desorption rates of E2. Decreasing injection velocity or increasing MnO(2) concentration facilitate E2 degradation. The nanoparticles-based technology appears promising for in-situ oxidation of endocrine disruptors in groundwater.

Remediation of soil chromium (Cr) pollution is becoming more and more urgent. In this study, a multi-loaded nano-zero-valent iron (nZVI) material (CNH) was prepared by carboxymethyl cellulose (CMC) and humic acid (HA) as dispersant and support agent, respectively, and the remediation effect of CNH, HA and CN (CNH without HA) for Cr contaminated soil was investigated within 90 d cycle. After 7 d treatment of CNH, the HOAc-extractable Cr decreased significantly. After the 90 d remediation, the HOAc-extractable Cr decreased most in the treatment of 3% CNH, about 74.48% lower than control. All treatments eventually caused different decline of soil pH, with a range of 0.12–0.54, in which the CNH treatment group had the least depression. HA loading significantly weakened the toxicity of nZVI, resulting in the higher soil microbial quantity and enzyme activities compared with CN. Additionally, the improvement of soil microecology by CNH and HA was positively correlated with the ratio of application, while CN was negatively correlated (except FDA enzyme activity) with these indexes. These results emphasized the potential of the synthesized CNH as a promising material to remediate Cr contaminated soil. Furthermore, details of possible mechanistic insight into the Cr remediation were carefully discussed.

Florfenicol is one of the most-used antimicrobial agents in global fish farming. Nevertheless, in most countries, its use is not conducted in accordance with good practices. The aim of this work was to evaluate the leaching of florfenicol from coated fish feed into the water. Analytical methods were developed and validated for the quantitation of florfenicol in medicated feed and water by UHPLC-MS/MS. Florfenicol residues in the water were quantified after 5- and 15-min exposures of the medicated feed in the water at 22 and 28 °C and at pH 4.5 and 8.0. The influence of pellet size and three coating agents (vegetable oil, carboxymethylcellulose, and low-methoxylated pectin) on the leaching of the drug was also assessed. Pellet size, coating agent, water temperature, and time of exposure significantly (p < 0.05) affected florfenicol leaching, while water pH did not interfere with the leaching. Coating with vegetable oil was the most efficient method to reduce florfenicol leaching, while coating with carboxymethylcellulose presented the highest leaching (approximately 60% after 15 min at 28 °C). Thus, the coating agent has a significant effect on the florfenicol leaching rate and, consequently, on the necessary dose of the drug to be administered. Moreover, it is worth mentioning that higher florfenicol leaching will pose a greater risk to environmental health, specifically in terms of the development of bacteria resistant to florfenicol. Additional studies are needed with other polymers and veterinary drugs used in medicated feed for fish farming.

Iron-based nanotechnologies are increasingly used for environmental remediation; however, toxicologic impacts of iron nanoparticles on the aquatic ecosystem remain poorly understood. We treated larvae of medaka fish (Oryzias latipes) with thoroughly characterized solutions containing carboxymethyl cellulose (CMC)-stabilized nanoscale zerovalent iron (nZVI), aged nanoscale iron oxides (nFe-oxides) or ferrous ion (Fe[II]) for 12–14days’ aqueous exposure to assess the causal toxic effect(s) of iron NPs on the fish. With the CMC-nZVI solution, the dissolved oxygen level decreased, and a burst of reactive oxygen species (ROS) was generated as Fe(II) oxidized to ferric ion (Fe[III]); with the other two iron solutions, these parameters did not significantly change. CMC-nZVI and Fe(II) solutions caused acute lethally and sublethally toxic effects in medaka larvae, with nFe-oxide-containing solutions causing the least toxic effects. We discuss modes of toxic action of iron NPs and chronic toxic effects in terms of hypoxia, Fe(II) toxicity and ROS-mediated oxidative damage.

In order to reduce the dust pollution caused by the coal mining process, a novel composite environmental dust suppressant for coal dust control was synthesized by corn straw, sodium carboxymethyl cellulose (CMC), and additives. This study focused on the preparation conditions of the dust suppressant, and the performances of which were investigated systematically. Response surface method (RSM) was used to optimize the raw material formulation and preparation parameters. The optimum mass ratio of straw, CMC, and alkali of the dust suppression was 65:20:15 (m/m), which was prepared under the conditions of the reaction time being 1.5 h and the rotation speed being 300 r/min. The pH of the dust suppressant was 8.0, and the state of which was suspension. Additives were benefited to enhance the suppressant performance, and the surface tension and the contact angle could decrease to 32.4 mN/m and 32.0°. The suppressant has a maximum viscosity of 363.6 mPa·s, and the compressive strength could be up to 200 kPa. The hygroscopic rate could reach more than 4%. The wind erosion resistance could be up to 99 % at the wind speed of 14 m/s. After spraying the dust suppressant, the gap between particles was filled with dust suppressant, and the adjacent particles were bound by strong mechanical action.

Due to the high toxicity of thallium (Tl), Tl-containing wastewater has caused severe environmental problems. In this study, we have developed a new sodium carboxymethyl cellulose (CMC)–modified nano-FeS material (CMC-FeS) as adsorben to remove Tl(I) from water. The adsorbents are compared with the adsorbents of ferrous sulfide-zero valent iron composite (FeS-Fe). The physical and chemical properties of the adsorbents were studied by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). These adsorption experiments show that the adsorption capacity could reach 86.97 mg/g at a CMC-FeS dosage of 2 g/L. The influence of different pH, solid–liquid ratios, co-existing ions, and temperature on the adsorbent has been investigated. The results show that the adsorbent is a potential adsorbent and the modified method by using sodium carboxymethyl cellulose is a very effective method for removing thallium.

Carboxymethyl cellulose/poly(acrylic acid) (CMC-cl-pAA) hydrogel and its magnetic hydrogel nanocomposite (CMC-cl-pAA/Fe₃O₄-C30B) were prepared via a free radical polymerization method and used as adsorbents for adsorption of methylene blue (MB) dye. The samples were characterized using Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy coupled with energy-dispersive X-ray spectrometer, high-resolution transmission electron microscope, and dynamic mechanical analysis. The adsorption performance of the prepared adsorbents was studied in a batch mode. Adsorption kinetics and isotherm models were applied in the experimental data to evaluate the nature as well as the mechanism of adsorption processes. It was deduced that the adsorption followed the pseudo-second-order rate equation and Langmuir isotherm models. The maximum adsorption capacities were found to be 1109.55 and 1081.60 mg/g for CMC-cl-pAA hydrogel and CMC-cl-pAA/Fe₃O₄-C30B hydrogel nanocomposite, respectively. The adsorption thermodynamic studies suggested that the adsorption process was spontaneous and endothermic for CMC-cl-pAA/Fe₃O₄-C30B hydrogel nanocomposite. The homogeneous dispersion of the Fe₃O₄-C30B nanocomposite in the CMC-cl-pAA hydrogel significantly improved the thermal stability, mechanical strength, and excellent regeneration stability. This study demonstrates the application potential of the fascinating properties of CMC-cl-pAA/Fe₃O₄-C30B hydrogel nanocomposite as a highly efficient adsorbent in the removal of organic dyes from aqueous solution.

A considerable number of studies have been conducted to investigate the effect of physical and chemical variables on the transport of nanoscale zerovalent iron (nZVI) in granular media. However, the role of soil grain size as a crucial factor in nanoparticle mobility is less understood. The present research work sought to examine the simultaneous effects of soil grain size and particle concentration on the transport of nZVI coated with carboxymethyl cellulose (CMC-nZVI), using saturated sand packed column experiments. To this end, a total of 12 tests were conducted by combining four different particle concentrations (C = 10, 200, 3000, 10,000 mg/l) and three grain sizes (dc = 0.297–0.5 mm, 0.5–1 mm, 1–2 mm). The effluent nZVI concentration and water pressure drop along the column were measured. The results showed that during the injection time, decreasing the grain size and increasing the particle concentration reduces the mobility of CMC-nZVI due to ripening phenomena, while during the flushing time (introducing deionized water), such changes in grain size and particle concentration increase the mobility of CMC-nZVI due to a release from the secondary energy minimum well (in the DLVO theory).

A novel nanocomposite bead based on polymeric matrix of carboxymethyl cellulose and copper oxide-nickel oxide nanoparticles was synthesized, characterized, and applied for adsorptive removal of inorganic and organic contaminants at trace level of part per million (mgL⁻¹) from aqueous sample. Carboxymethyl cellulose/copper oxide-nickel oxide (CMC/CuO-NiO) adsorbent beads were selective toward the removal of Pb(II) among other metal ions. The removal percentage of Pb(II) was more than 99% with 3 mgL⁻¹. The waste beads after Pb (II) adsorption (Pb@CMC/CuO-NiO) and CMC/CuO-NiO nanocomposite beads were employed as adsorbents for removing of various dyes. It was found that Pb@CMC/CuO-NiO can be reused as adsorbent for the removal of Congo Red (CR), while CMC/CuO-NiO nanocomposite beads were more selective for removal of Eosin Yellow (EY) from aqueous media. The adsorption of CR and EY was optimized, and the removal percentages were 93% and 96.4%, respectively. The influence of different parameters was studied on the uptake capacity of Pb(II), CR, and EY, and lastly, the CMC/CuO-NiO beads exhibited responsive performance in relation to pH and other parameters. Thus, the prepared CMC/CuO-NiO beads were found to be a smart material which is effective and played super adsorption performance in the removal of Pb(II), CR, and EY from aqueous solution. These features make CMC/CuO-NiO beads suitable for numerous scientific and industrial applications and may be used as an alternative to high-cost commercial adsorbents.

In order to endow alkaline Ca-bentonite (ACB) with magnetic separation ability, simultaneously obtain better magnetic stability and stronger removal capacity of heavy metal cations; magnetic alkaline Ca-bentonite/carboxymethylcellulose-chitosan film (MACB/C-C) was prepared by organic modification of magnetic alkaline Ca-bentonite (MACB) using non-toxic carboxymethylcellulose and chitosan. Textural characterization results revealed that magnetic Fe₃O₄ nanoparticles were successfully immobilized on ACB and modified with C-C. The functionalized layer of C-C concurrently enhanced the stability of Fe₃O₄ and removal performances of heavy metal cations. Adsorption results indicated that MACB/C-C exhibited thorough separation from aqueous solution and greater uptake ability for Pb(II) and Cd(II) (483 mg·g⁻¹ and 123 mg·g⁻¹) than the nascent MACB (335 mg·g⁻¹ and 76 mg·g⁻¹), respectively, at pH 5 and 25 °C temperature. The adsorption of Pb(II) and Cd(II) on MACB/C-C mainly occurred via surface precipitation and complexation when pH > 2. MACB/C-C could be efficiently recycled with marginal decrease in adsorption capacity. The current approach credited to the convenient operation, simplified synthesis, and high efficiency of MACB/C-C could be deemed as a promising alternative for the removal of heavy metal cations from wastewater.