Affiner votre recherche
Résultats 1-10 de 107
The impacts of intensive mining on terrestrial and aquatic ecosystems: A case of sediment pollution and calcium decline in cool temperate Tasmania, Australia Texte intégral
2020
Beck, K.K. | Mariani, M. | Fletcher, M.-S. | Schneider, L. | Aquino-López, M.A. | Gadd, P.S. | Heijnis, H. | Saunders, K.M. | Zawadzki, A.
Mining causes extensive damage to aquatic ecosystems via acidification, heavy metal pollution, sediment loading, and Ca decline. Yet little is known about the effects of mining on freshwater systems in the Southern Hemisphere. A case in point is the region of western Tasmania, Australia, an area extensively mined in the 19th century, resulting in severe environmental contamination. In order to assess the impacts of mining on aquatic ecosystems in this region, we present a multiproxy investigation of the lacustrine sediments from Owen Tarn, Tasmania. This study includes a combination of radiometric dating (¹⁴C and ²¹⁰Pb), sediment geochemistry (XRF and ICP-MS), pollen, charcoal and diatoms. Generalised additive mixed models were used to test if changes in the aquatic ecosystem can be explained by other covariates. Results from this record found four key impact phases: (1) Pre-mining, (2) Early mining, (3) Intense mining, and (4) Post-mining. Before mining, low heavy metal concentrations, slow sedimentation, low fire activity, and high biomass indicate pre-impact conditions. The aquatic environment at this time was oligotrophic and dystrophic with sufficient light availability, typical of western Tasmanian lakes during the Holocene. Prosperous mining resulted in increased burning, a decrease in landscape biomass and an increase in sedimentation resulting in decreased light availability of the aquatic environment. Extensive mining at Mount Lyell in the 1930s resulted in peak heavy metal pollutants (Pb, Cu and Co) and a further increase in inorganic inputs resulted in a disturbed low light lake environment (dominated by Hantzschia amphioxys and Pinnularia divergentissima). Following the closure of the Mount Lyell Co. in 1994 CE, Ca declined to below pre-mining levels resulting in a new diatom assemblage and deformed diatom valves. Therefore, the Owen Tarn record demonstrates severe sediment pollution and continued impacts of mining long after mining has stopped at Mt. Lyell Mining Co.
Afficher plus [+] Moins [-]Individual exposure level following indoor and outdoor air pollution exposure in Dakar (Senegal) Texte intégral
2019
Individual exposure level following indoor and outdoor air pollution exposure in Dakar (Senegal) Texte intégral
2019
The consequences of indoor and outdoor air pollution on human health are of great concern nowadays. In this study, we firstly evaluated indoor and outdoor air pollution levels (CO, CO₂, NO, NO₂, PM₁₀) at an urban site in Dakar city center and at a rural site. Then, the individual exposure levels to selected pollutants and the variations in the levels of biomarkers of exposure were investigated in different groups of persons (bus drivers, traders working along the main roads and housemaids). Benzene exposure levels were higher for housemaids than for bus drivers and traders. High indoor exposure to benzene is probably due to cooking habits (cooking with charcoal), local practices (burning of incense), the use of cleaning products or solvent products which are important emitters of this compound. These results are confirmed by the values of S-PMA, which were higher in housemaids group compared to the others. Urinary 1-HOP levels were significantly higher for urban site housemaids compared to semirural district ones.Moreover, urinary levels of DNA oxidative stress damage (8-OHdG) and inflammatory (interleukin-6 and -8) biomarkers were higher in urban subjects in comparison to rural ones.The air quality measurement campaign showed that the bus interior was more polluted with PM₁₀, CO, CO₂ and NO than the market and urban or rural households. However, the interior of households showed higher concentration of VOCs than outdoor sites confirming previous observations of higher indoor individual exposure level to specific classes of pollutants.
Afficher plus [+] Moins [-]Individual exposure level following indoor and outdoor air pollution exposure in Dakar (Senegal)
Household biomass fuel use, blood pressure and carotid intima media thickness; a cross sectional study of rural dwelling women in Southern Nigeria Texte intégral
2018
Ofori, Sandra N. | Fobil, Julius N. | Odia, Osaretin J.
Rising prevalence of cardiovascular disease requires in-depth understanding of predisposing factors. Studies show an association between air pollution and CVD but this association is not well documented in southern Nigeria where the use of biomass fuels (BMF) for domestic purposes is prevalent.This study aimed to explore the association between household BMF use and blood pressure (BP) and carotid intima media thickness (CIMT) among rural-dwelling women.A cross-sectional study of 389 women aged 18 years and older. Questionnaires were used to obtain data on predominant fuel used and a brief medical history. Wood, charcoal and agricultural waste were classified as BMF while kerosene, bottled gas and electricity were classified as non-BMF. Blood pressure and CIMT were measured using standard protocols. Regression analysis was used to assess the relationship between fuel type and BP, CIMT, pre-hypertension and hypertension after adjusting for confounders.There was a significant difference in the mean (standard deviation) systolic BP (135.3, 26.7 mmHg vs 123.8, 22.6 mmHg; p < 0.01), diastolic BP (83.7, 18.5 mmHg vs 80.1, 13.8 mmHg; p = 0.043) and CIMT (0.63, 0.16 mm vs 0.56, 0.14 mm; p = 0.004) among BMF users compared to non-BMF users. In regression analysis, the use of BMF was significantly associated with 2.7 mmHg higher systolic BP (p = 0.040), 0.04 mm higher CIMT (p = 0.048) in addition to increased odds of pre-hypertension (OR 1.67 95% CI 1.56, 4.99, P = 0.035) but not hypertension (OR 1.23 95% CI 0.73, 2.07, P = 0.440).In this population, there was a significant association between BMF use and increased SBP, CIMT and pre-hypertension. This requires further exploration with a large-scale longitudinal study design because there are policy implications for countries like Nigeria where a large proportion of the population still rely on BMF for domestic energy.
Afficher plus [+] Moins [-]Impact of partial fuel switch on household air pollutants in sub-Sahara Africa Texte intégral
2017
Tumwesige, Vianney | Okello, Gabriel | Semple, Sean | Smith, Jo
Over 700 million people in Sub-Saharan Africa depend on solid biomass fuel and use simple cookstoves in poorly ventilated kitchens, which results in high indoor concentrations of household air pollutants. Switching from biomass to biogas as a cooking fuel can reduce airborne emissions of fine particulate matter (PM2.5) and carbon monoxide (CO), but households often only partially convert to biogas, continuing to use solid biomass fuels for part of their daily cooking needs. There is little evidence of the benefits of partial switching to biogas. This study monitored real-time PM2.5 and CO concentrations in 35 households in Cameroon and Uganda where biogas and firewood (or charcoal) were used. The 24 h mean PM2.5 concentrations in households that used: (1) firewood and charcoal; (2) both firewood (mean 54% cooking time) and biogas (mean 46% cooking time); and (3) only biogas, were 449 μg m⁻³, 173 μg m⁻³ and 18 μg m⁻³ respectively. The corresponding 24 h mean CO concentrations were 14.2 ppm, 2.7 ppm and 0.5 ppm. Concentrations of both PM2.5 and CO were high and exceeded the World Health Organisation guidelines when firewood and charcoal were used. Partially switching to biogas reduced CO exposure to below the World Health Organisation guidelines, but PM2.5 concentrations were only below the 24 h recommended limits when households fully converted to biogas fuel. These results indicate that partial switching from solid fuels to biogas is not sufficient and continues to produce concentrations of household air pollution that are likely to harm the health of those exposed. Programmes introducing biogas should aim to ensure that household energy needs can be fully achieved using biogas with no requirement to continue using solid fuels.
Afficher plus [+] Moins [-]Characterization of particulate-phase polycyclic aromatic hydrocarbons emitted from incense burning and their bioreactivity in RAW264.7 macrophage Texte intégral
2017
Yang, Tzu-Ting | Ho, Su Chen | Chuang, Lu-Te | Chuang, Hsiao-Chi | Li, Ya-Ting | Wu, Jyun-Jie
This study investigated the effects of particle-bound polycyclic aromatic hydrocarbons (PAHs) produced from burning three incense types on and their bioreactivity in the RAW 264.7 murine macrophage cell line. Gas chromatography/mass spectrometry was used to determine the levels of 16 identified PAHs. Macrophages were exposed to incense particle extracts at concentrations of 0, 3.125, 6.25, 12.5, 25, 50, and 100 μg/mL for 24 h. After exposure, cell viability and nitric oxide (NO) and inflammatory mediator [tumor necrosis factor (TNF)-α] production of the cells were examined. The mean atomic hydrogen (H) to carbon (C) ratios in the environmentally friendly, binchotan charcoal, and lao shan incenses were 0.69, 1.13, and 1.71, respectively. PAH and total toxic equivalent (TEQ) mass fraction in the incenses ranged from 137.84 to 231.00 and 6.73–26.30 pg/μg, respectively. The exposure of RAW 264.7 macrophages to incense particles significantly increased TNF-α and NO production and reduced cell viability. The cells treated with particles collected from smoldering the environmentally friendly incense produced more NO and TNF-α compared to other incenses. Additionally, the TEQ of fluoranthene (FL), pyrene (Pyr), benzo[a]anthracene (BaA), chrysene (Chr), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene (INP), dibenz[a,h]anthracene (DBA), and benzo[g,h,i]perylene [B(ghi)P] had a significant correlation (R2 = 0.64–0.98, P < 0.05) with NO and TNF-α production. The current findings indicate that incense particle-bound PAHs are biologically active and that burning an incense with a lower H/C ratio caused higher bioreactivity. The stimulatory effect of PAH-containing particles on molecular mechanisms of inflammation are critical for future study.
Afficher plus [+] Moins [-]Municipal composts reduce the transfer of Cd from soil to vegetables Texte intégral
2016
Al Mamun, Shamim | Chanson, Guilhem | Muliadi, | Benyas, Ebrahim | Aktar, Munmun | Lehto, Niklas | McDowell, Richard | Cavanagh, J. E. (Jo-Anne E.) | Kellermann, Liv | Clucas, Lynne | Robinson, Brett
Cadmium (Cd) is a non-essential trace element that accumulates in agricultural soils through the application of Cd-rich phosphate fertiliser. Vegetables can accumulate Cd to concentrations that sometimes exceed food safety standards. We investigated the potential of low-cost soil amendments to reduce Cd uptake by spinach (Spinacia oleracea L.), lettuce (Lactuca sativa L.) and onion (Allium cepa L.). Batch sorption experiments revealed the relative sorption of Cd by biosolids, charcoal, lignite, sawdust, two types of compost, bentonite and zeolite. Lignite and compost had the greatest ability to sorb Cd and were subsequently selected for pot trials, which elucidated their effect on Cd uptake by onions, spinach and lettuce in two market garden soils with native Cd concentrations of 1.45 mg/kg and 0.47 mg/kg. The addition of 2.5% (dry w/w) municipal compost reduced the Cd concentration in onions, spinach and lettuce by up to 60% in both soils. The addition of lignite gave variable results, which depended on the soil type and rate of addition. This Cd immobilisation was offset by soil acidification caused by the lignite. The results indicate that municipal compost is a low-cost soil conditioner that is effective in reducing plant Cd uptake.
Afficher plus [+] Moins [-]Reducing the bioavailability of PCBs in soil to plant by biochars assessed with triolein-embedded cellulose acetate membrane technique Texte intégral
2013
Wang, Yu | Wang, Yurun | Wang, Lei | Fang, Guo-Dong | Cang, Long | Herath, H.M.S.K. | Zhou, Dong-Mei
Coupling with triolein-embedded cellulose acetate membrane (TECAM) technique, hydroxypropyl β-cyclodextrins (HPCD) extraction method, and the greenhouse pot experiments, the influences of biochars on polychlorinated biphenyls (PCBs) bioavailability in soil to plant (Brassica chinensis L. and Daucus carota) were investigated. Addition of 2% biochars to soils significantly reduced the uptake of PCBs in plant, especially for di-, tri- and tetra-chlorobiphenyls. PCBs concentrations in the roots of B. chinensis and D. carota were reduced for 61.5–93.7%, and 12.7–62.4%, respectively in the presence of biochars. The kinetic study showed that in the soils amended with/without biochars, PCBs concentrations accumulated in TECAM, as well as in the HPCD extraction solution, followed significant linear relationships with those in plant roots. Application of biochars to soil is a potentially promising method to reduce PCBs bioavailability whereas TECAM technique can be a useful tool to predict the bioavailability of PCBs in soil.
Afficher plus [+] Moins [-]Enhanced PCBs sorption on biochars as affected by environmental factors: Humic acid and metal cations Texte intégral
2013
Wang, Yu | Wang, Lei | Fang, Guodong | Herath, H.M.S.K. | Wang, Yujun | Cang, Long | Xie, Zubin | Zhou, Dongmei
Biochar plays an important role in the behaviors of organic pollutants in the soil environment. The role of humic acid (HA) and metal cations on the adsorption affinity of polychlorinated biphenyls (PCBs) to the biochars in an aqueous medium and an extracted solution from a PCBs-contaminated soil was studied using batch experiments. Biochars were produced with pine needles and wheat straw at 350 °C and 550 °C under anaerobic condition. The results showed that the biochars had high adsorption affinity for PCBs. Pine needle chars adsorbed less nonplanar PCBs than planar ones due to dispersive interactions and separation. Coexistence of HA and metal cations increased PCBs sorption on the biochars accounted for HA adsorption and cation complexation. The results will aid in a better understanding of biochar sorption mechanism of contaminants in the environment.
Afficher plus [+] Moins [-]Simultaneous adsorption and degradation of γ-HCH by nZVI/Cu bimetallic nanoparticles with activated carbon support Texte intégral
2011
Chang, Chun | Lian, Fei | Zhu, Lingyan
Cu amended zero valent iron bimetallic nanoparticles were synthesized by doping Cu on the surface of iron. They were incorporated with granular activated carbon (AC) to prepare supported particles (AC–Fe⁰–Cu), which were used to remove γ-HCH. Cu on the surface of iron enhanced the dechlorination activity of Fe⁰. The dechlorination rate constant (kₒbₛ) increased with the Cu loading on the surface of iron and the maximum was achieved with 6.073% Cu. AC as a support was effective for increasing the dispersion of the nanoparticles and avoiding the agglomeration of the metallic nanoparticles. The simultaneous adsorption of γ-HCH on AC accelerated the degradation rate of γ-HCH by the bimetals. After reaction for 165 min, around 99% of γ-HCH was removed by the solids of AC–Fe⁰–Cu. In addition, AC could adsorb the degradation products. The degradation of γ-HCH was mainly through dehydrochlorination and dichloroelmination based on the intermediate products detected by GC/MS.
Afficher plus [+] Moins [-]Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres Texte intégral
2011
Dai, Chao-meng | Geissen, S.-U. (Sven-Uwe) | Zhang, Ya-lei | Zhang, Yong-jun | Zhou, Xue-fei
A molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization using diclofenac (DFC) as a template. Binding characteristics of the MIP were evaluated using equilibrium binding experiments. Compared to the non-imprinted polymer (NIP), the MIP showed an outstanding affinity towards DFC in an aqueous solution with a binding site capacity (Qₘₐₓ) of 324.8mg/g and a dissociation constant (Kd) of 3.99mg/L. The feasibility of removing DFC from natural water by the MIP was demonstrated by using river water spiked with DFC. Effects of pH and humic acid on the selectivity and adsorption capacity of MIP were evaluated in detail. MIP had better selectivity and higher adsorption efficiency for DFC as compared to that of powdered activated carbon (PAC). In addition, MIP reusability was demonstrated for at least 12 repeated cycles without significant loss in performance, which is a definite advantage over single-use activated carbon.
Afficher plus [+] Moins [-]