The purpose of this study was to investigate antibiotic resistant fungal (ARF) communities in pig manure (PM) composting employing two different biochar (coconut shell-CSB and bamboo biochar-BB) as amendment. Three treatments (Control, 10% CSB and 10% BB) were designed and indicated with T1 to T3. Experimental results declared that the fungal abundance significantly reduced among the both biochar applied treatments but three dominant phyla Ascomycota, Basidiomycota and Mucoromycota were still relatively greater abundance present. There were significant differences (p < 0.05) in the relative abundance and diversity of fungi among all three treatments. Interestingly, biochar addition regulated the overall fungal community in final compost. Compared with the control group, the abundance of fungi was positively mobilized, and especially CSB showed a better effect. Conclusively, biochar has potential to inhibit and reduce the ARGs population and mobility in compost. Thus, these findings offer new insight to understand the succession of ARFs during PM composting.

The effects of biological activated carbon treatment using Fe₂O₃ modified coconut shell-based activated carbon (Fe/CAC) were investigated on the occurrence of opportunistic pathogens (OPs) and formation of disinfection by-products (DBPs) in simulated drinking water distribution systems (DWDSs) with unmodified CAC as a reference. In the effluent of annular reactor (AR) with Fe/CAC, the OPs growth and DBPs formation were inhibited greatly. Based on the differential pulse voltammetry and dehydrogenase activity tests, it was verified that extracellular electron transfer was enhanced in the attached biofilms of Fe/CAC, hence improving the microbial metabolic activity and biological removal of organic matter especially DBPs precursors. Meanwhile, the extracellular polymeric substances (EPS) on the surface of Fe/CAC exhibited stronger viscosity, higher flocculating efficiency and better mechanical stability, avoiding bacteria or small-scale biofilms falling off into the water. Consequently, the microbial biomass and EPS substances amount decreased markedly in the effluent of Fe/CAC filter. More importantly, Fe/CAC did significantly enhance the shaping role on microbial community of downstream DWDSs, continuously excluding OPs advantage and inhibiting EPS production. The weakening of EPS in DWDSs resulted in decrease of microbial chlorine-resistance ability and EPS-derived DBPs precursors supply. Therefore, the deterioration of water quality in DWDSs was inhibited greatly, sustainably maintaining the safety of tap water. Our findings indicated that optimizing biological activated carbon treatment by interface modification is a promising method for improving water quality in DWDSs.

Microbial-mediated Sb volatilization is a poorly understood part of the Sb biogeochemical cycle. This is mostly due to a lack of laboratory and field-deployable methods that are capable of quantifying low-level emissions of Sb from diffuse sources. In this study, we validated two methods using a H₂O₂ -HNO₃ liquid chemotrap and an activated coconut shell charcoal solid-phase trap, achieving an absolute limit of detection of 4.6 ng and below 2.0 ng Sb, respectively. The activated charcoal solid-phase trapping method, the most easily operated method, was then applied to contaminated shooting range soils. Four treatments were tested: 1) flooded, 2) manure amended + flooded, 3) 70 % water holding capacity, and 4) manure amendment +70 % water holding capacity, since agricultural practices and flooding events may contribute to Sb volatilization. Volatile Sb was only produced from flooded microcosms and manure amendment greatly influenced the onset and amount of volatile Sb produced. The highest amount of volatile Sb produced, up to 62.1 ng kg⁻¹ d⁻¹, was from the flooded manure amended soil. This suggests that anaerobic microorganisms may potentially be drivers of Sb volatilization. Our results show that polluted shooting range soils are a source of volatile Sb under flooded conditions, which may lead to an increase in the mobility of Sb. Some of these volatile Sb species are toxic and genotoxic, highlighting the role of Sb volatilization on environmental health, especially for individuals living in contaminated areas exposed to wetlands or flooded conditions (e.g., rice paddy agriculture surrounding mining areas). This work paves way for research on Sb volatilization in the environment.

Soil fumigation continues to play an important role in soil disinfection, but tools to significantly reduce emissions while providing environmental benefits (e.g., biochar) are lacking. The objective of this study was to determine the effects of biochar products on fumigant 1,3-dichloropropene (1,3-D) and chloropicrin (CP) emissions, their distribution and persistence in soil, nematode control, and potential toxicity to plants in a field trial. Treatments included three biochar products [two derived from almond shells (ASB) at either 550 or 900 °C pyrolysis temperature and one from coconut shells (CSB) at 550 °C] at 30 and 60 t ha⁻¹, a surface covering with a low permeability film (TIF), and no surface covering (control). A mixture of 1,3-D (∼65%) and CP (∼35%) was injected to ∼60 cm soil depth at a combined rate of 640 kg ha⁻¹. All biochar treatments significantly reduced emissions by 38–100% compared to the control. The ASB (900 °C) at both rates reduced emissions as effectively as the TIF (by 99–100%). Both fumigant emission reduction and residue in surface soil were positively correlated with biochar's adsorption capacity while cucumber germination rate and dry biomass were negatively correlated with residual fumigant concentrations in surface soil. This research demonstrated the potential and benefits of using biochar produced from local orchard feedstocks to control fumigant emissions. Additional research is needed to maximize the benefits of biochar on fumigant emission reductions without impacting plant growth.

In the transportation sector, the share of biofuels such as biodiesel is increasing and it is known that such fuels significantly affect NOx emissions. In addition to NOx emission from diesel engines, which is a significant challenge to vehicle manufacturers in the most recent emissions regulation (Euro 6.2), this study investigates NO₂ which is a toxic emission that is currently unregulated but is a focus to be regulated in the next regulation (Euro 7). This manuscript studies how the increasing share of biofuels affects the NO₂, NOx, and NO₂/NOx ratio during cold-start (in which the after-treatment systems are not well-effective and mostly happens in urban areas). Using a turbocharged cummins diesel engine (with common-rail system) fueled with diesel and biofuel derived from coconut (10 and 20% blending ratio), this study divides the engine warm-up period into 7 stages and investigates official cold- and hot-operation periods in addition to some intermediate stages that are not defined as cold in the regulation and also cannot be considered as hot-operation. Engine coolant, lubricating oil and exhaust temperatures, injection timing, cylinder pressure, and rate of heat release data were used to explain the observed trends. Results showed that cold-operation NOx, NO₂, and NO₂/NOx ratio were 31–60%, 1.14–2.42 times, and 3–8% higher than the hot-operation, respectively. In most stages, NO₂ and the NO₂/NOx ratio with diesel had the lowest value and they increased with an increase of biofuel in the blend. An injection strategy change significantly shifted the in-cylinder pressure and heat release diagrams, aligned with the sudden NOx drop during the engine warm-up. The adverse effect of cold-operation on NOx emissions increased with increasing biofuel share.

The increase of annual organic wastes generated worldwide has become a major problem for many countries since the mismanagement could bring about negative effects on the environment besides, being costly for an innocuous disposal. Recently, insect larvae have been investigated to valorize organic wastes. This entomoremediation approach is rising from the ability of the insect larvae to convert organic wastes into its biomass via assimilation process as catapulted by the natural demand to complete its lifecycle. Among the insect species, black soldier fly or Hermetia illucens is widely researched since the larvae can grow in various environments while being saprophagous in nature. Even though black soldier fly larvae (BSFL) can ingest various decay materials, some organic wastes such as sewage sludge or lignocellulosic wastes such as waste coconut endosperm are destitute of decent nutrients that could retard the BSFL growth. Hence, blending with nutrient-rich low-cost substrates such as palm kernel expeller, soybean curd residue, etc. is employed to fortify the nutritional contents of larval feeding substrates prior to administering to the BSFL. Alternatively, microbial fermentation can be adopted to breakdown the lignocellulosic wastes, exuding essential nutrients for growing BSFL. Upon reaching maturity, the BSFL can be harvested to serve as the protein and lipid feedstock. The larval protein can be made into insect meal for farmed animals, whilst the lipid source could be extracted and transesterified into larval biodiesel to cushion the global energy demands. Henceforth, this review presents the influence of various organic wastes introduced to feed BSFL, targeting to reduce wastes and producing biochemicals from mature larvae through entomoremediation. Modification of recalcitrant organic wastes via fermentation processes is also unveiled to ameliorate the BSFL growth. Lastly, the sustainable applications of harvested BSFL biomass are as well covered together with the immediate shortcomings that entail further researches.

Benzene, toluene and xylene (BTX) belong to an important group of aromatic volatile organic compounds (VOCs) that are usually emitted from various sources. BTX play a vital role in the tropospheric chemistry as well as pose health hazard to human beings. Thus, an investigation of ambient benzene, toluene and xylene (BTX) was conducted at urban and rural sites of Gorakhpur for a span of one year in order to ascertain the contamination levels. The sampling of BTX was performed by using a low-flow SKC Model 220 sampling pump equipped with activated coconut shell charcoal tubes with a flow rate of 250 ml/min for 20–24 h. The analysis was in accordance with NIOSH method 1501. The efficiency of pump was checked weekly using regulated rotameters with an accuracy of ±1%. The samples were extracted with CS₂ with occasional agitation and analyzed by GC-FID. The total BTX concentration ranged from 3.4 μg m⁻³ to 45.4 μg m⁻³ with mean value 30.95 μg m⁻³ and median 24.8 μg m⁻³. The mean concentration of total BTX was maximum during winter (39.3 μg m⁻³), followed by summer (28.4 μg m⁻³) and monsoon season (25.1 μg m⁻³). The mean concentration of BTX at urban site (11.8 μg m⁻³) was higher than that at rural site (8.8 μg m⁻³). At both the sites, T/B and X/B ratios were highest in monsoon and lowest in winters. Toluene against benzene plot shows R² value of 0.96 and 0.49 at urban and rural sites respectively. Higher R² value at urban site clearly indicates similar sources of emission for benzene and toluene. At both the sites, the estimated integrated lifetime cancer risk (ILTCR) for benzene exceeded the threshold value of 1E-06 whereas the individual hazard quotients (HQ) for BTX did not exceed unity at any of the sites.

Liaohe River has received significant attention in the northeast region and even in the entire country. As part of a recently completed water quality assessment, a series of water column and sediment toxicity tests was performed throughout the watershed. In the current study, we subjected sediments from the Liaohe River to toxicity identification evaluation manipulations and tests for chronic toxicity with midge (Chironomus riparius), with survival as the end point. In Phase I, the sediments were treated with zeolite, cation-exchange resin, and powdered coconut charcoal. Results confirmed that ammonia compounds were the major contaminants in terms of toxicity, although toxic effects from metals were also a concern in at least three sites. In Phase II identification, chemical analysis provided a strong evidence that the metals As and Cd are the probable causes of toxicity in the sediments, without the influence of ammonia. Temporally, ammonia is responsible for the toxicity of the selected sediments.

A new adsorbent from Jerivá coconut (a fruit native to the Atlantic Forest) was developed through thermal and chemical activation with H₃PO₄. The characterization of activated carbon using SEM–EDS revealed an irregular and heterogeneous surface, with a surface area of 750 m² g⁻¹, while FTIR indicated the presence of functional groups. The adsorption kinetics was favorable, reaching equilibrium in 80 min, removing more than 99% of the initial concentration (100 mg L⁻¹) of methylene blue; the Avrami model had a better fit to the data. The sorption isotherms performed at four temperatures showed endothermic behavior, with a maximum adsorption capacity of 254.40 mg g⁻¹, with adjustment to the Sips model. The mechanisms involved in dye adsorption were discussed and elucidated. The adsorbent was tested to remove the color of the real effluent from the textile industry, and the results showed discoloration superior to 93%, meeting international disposal limits. The results confirm the efficiency of the new adsorbent and the possibility of application in the treatment of textile effluents.

The disposal of coconut wastes is costly and damaging to the environment, but its uses are advantageous activated carbons production. Coconut leaves waste were used for activated carbon production by pyrolysis at 500° C and activation with potassium carbonate. The activated carbon was used for caffeine removal from aqueous solution. The coconut leaves activated carbon showed a predominantly amorphous structure from X-ray diffraction analysis and a pH at the zero charge point of 7.9. From the N₂ adsorption/desorption method, the adsorbent showed a predominance of mesopores, with average pore size of 45.48 ηm and a surface area of 678.03 m²/g. From kinetic studies the data followed the pseudo-second order, where the intraparticle diffusion can be neglected. The adsorption isotherms were satisfactorily adjusted for the Redlich-Peterson model and a type curve L was identified. The thermodynamic parameters showed that adsorption occurred spontaneously, was exothermic and governed by physical adsorption. The artificial neural networks developed were capable of predicting both kinetics and equilibrium adsorption data under different operating conditions and was comparable to the traditional models available in literature in the training experiments, encouraging its use for data generalization when an efficient dataset is used. In conclusion, coconut leaves waste showed to be a promising feedstock to produce activated carbon aiming caffeine removal from water and wastewater.